TB 10007-2017: Code for design of railway signaling

Delivery: 9 seconds. Download (and Email) true-PDF + Invoice.
Get Quotation: Click TB 10007-2017 (Self-service in 1-minute)
Newer / historical versions: TB 10007-2017

Preview True-PDF

Scope

1.0.1 This Code is formulated with a view of unifying the railway signaling
engineering design criteria.
1.0.2 This Code is applicable to the design of standard-gauge railway
signaling engineering.
1.0.3 The railway signaling engineering design shall meet the requirements of
major railway technical policies.
1.0.4 The railway signaling engineering design shall meet the requirements of
main-line design speed, train operation character, cross-line train operation and
other transport organization schemes.
1.0.5 The railway signaling engineering design shall meet the requirements of
railway transport demand, network planning and economic development level;
and it shall be in line with the principle of safe application, advanced maturity
and economic rationality.
1.0.6 In case of adopting new technologies, new processes, new materials
and new equipment, the railway signaling engineering design shall meet the
relevant requirements of the railway engineering construction management.
1.0.7 The railway signaling system and circuit design involving the traffic
safety must comply with the “fail-safe” principle of railway signaling.
1.0.8 The engineering design of railway signaling system shall meet the
requirements of GB/T 21562 Railway applications - Specification and
demonstration of reliability, availability, maintainability and safety (RAMS) as
well as traffic command and control, and equipment maintenance.
1.0.9 The location and mode of railway signaling equipment shall not intrude
into the railway construction clearance. The elevation variation of additional
track surface shall also be taken into consideration.
1.0.10 The railway signaling engineering design shall meet the requirements
of the laws and regulations with regard to energy saving, land saving, water
saving, material saving, environmental protection, etc.
1.0.11 The railway signaling reconstruction engineering design shall make
reasonable use of existing equipment and apparatus in line with the conditions
of use.
1.0.12 The graphic symbols and codes used in the railway signaling
engineering design shall not only comply with this Code, but also meet the

Basic Data

Standard ID	TB 10007-2017 (TB10007-2017)
Description (Translated English)	Code for design of railway signaling
Sector / Industry	Railway and Train Industry Standard
Classification of Chinese Standard	S60
Word Count Estimation	107,197
Date of Issue	2017-01-19
Date of Implementation	2017-05-01
Older Standard (superseded by this standard)	TB 10007-2006
Regulation (derived from)	State-Railway-Science-Regulations (2017) No. 11
Issuing agency(ies)	National Railway Administration