SJ/T 11346-2015 English PDF (SJT11346-2015)

Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click SJ/T 11346-2015
Historical versions: SJ/T 11346-2015
Preview True-PDF (Reload/Scroll if blank)

SJ/T 11346-2015: Methods of measurement for electronic projectors
SJ/T 11346-2015
ELECTRONICS INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 33.160.25
M 74
Filing No.: 52000-2015
Replacing SJ/T 11346-2006
Methods of measurement for electronic projectors
ISSUED ON: OCTOBER 10, 2015
IMPLEMENTED ON: APRIL 01, 2016
Issued by: Industry and Information Technology of PRC
Table of Contents
Foreword ... 4 
1 Scope ... 6 
2 Normative references ... 6 
3 Terms, definitions, abbreviations ... 7 
3.1 Terms and definitions ... 7 
3.2 Abbreviations ... 8 
4 General requirements for measurement ... 8 
4.1 General description ... 8 
4.2 Performance measurement conditions ... 8 
4.3 Measuring instruments ... 9 
4.4 Video test signal ... 10 
4.5 Adjustment before measurement ... 12 
4.6 Adjustment of standard operating state ... 13 
5 Measurement method of normal temperature performance ... 14 
5.1 Correlated color temperature ... 14 
5.2 Luminance output ... 14 
5.3 Illuminance uniformity ... 15 
5.4 Contrast ... 16 
5.5 Ratio of allwhite and allblack ... 16 
5.6 Inherent resolution ... 17 
5.7 Definition ... 17 
5.8 Input format compatibility ... 18 
5.9 Focusing distance and image size ... 18 
5.10 Chromaticity error ... 19 
5.11 Non-uniformity of primary color chromaticity ... 19 
5.12 Non-uniformity of white chromaticity ... 20 
5.13 Color gamut coverage ... 21 
5.14 White balance error ... 21 
5.15 Operating noise ... 22 
5.16 Coincidence error ... 22 
5.17 Pixel defect points ... 23 
5.18 Trapezoid correction capability ... 24 
5.19 Projection distance at the projected image area 2 m2 ... 24 
5.20 Power consumption of whole machine ... 25 
5.21 Passive standby power ... 25 
5.22 Grid power adaptability ... 26 
5.23 Remote control distance ... 27 
5.24 Controlled angle ... 27 
5.25 Mass of whole machine ... 27 
5.26 Color light output ... 28 
Appendix A (Informative) Conversion method between CIE1976 uniform color space
and CIE1931 color space ... 29 
Methods of measurement for electronic projectors
1 Scope
This standard specifies the terms and definitions, measurement conditions,
measurement items, measurement methods, measurement results expression, etc., of
electronic projectors.
This standard applies to electronic projection type fixed resolution projectors
(hereinafter referred to as projectors), including liquid crystal display (LCD) projectors,
liquid crystal on silicon (LCoS) projectors, digital light processing (DLP) projectors,
etc. Other projection methods and electronic projectors, which are used in different
occasions, can be implemented with reference to it.
2 Normative references
The following documents are essential to the application of this document. For the dated
documents, only the versions with the dates indicated are applicable to this document;
for the undated documents, only the latest version (including all the amendments) is
applicable to this standard.
GB 3174 PAL-D system TV broadcasting technical specification
GB/T 6882 Acoustics - Determination of sound power levels of noise sources using
pressure - Precision methods for anechoic and hemi-anechoic rooms
GB/T 7921 Uniform color space and color difference formula
GB/T 14857 The specifications of encoding parameters of digital television for
studio
GB/T 15644 Application of connectors for the interconnection of equipment in
audio-visual systems
GB/T 17953 Interfaces for 4:2:2 digital component video signals
GB/T 26270-2010 Standard test signals for digital television receiving equipment
SJ/T 11324 Terminology of digital television receiving equipment
SJ/T 11329 Specification of interfaces for digital television receiving equipment -
Part 3: Video interface of composite video blanking synchronization
under standard operating conditions.
3.1.4
Passive standby mode
The lower power mode, at which the projector is connected to mains power BUT
does not provide primary functions. The projector can only enter this state, after
receiving external excitation signals, such as remote control and buttons. The
projector can be returned to the working state from this mode, by the activation of
the remote control device, internal signal, etc.
3.1.5
Color light output
The light output value, which is measured by a projector, when reproducing a color
image. It is a performance indicator, that measures the ability of a color projector to
reproduce primary color signals.
3.2 Abbreviations
The following abbreviations apply to this document:
CCT: Correlated colour temperature
CIE: Commission internationale de L' Eclairage (fr)
DLP: Digital light process
LCD: Liquid crystal display
LCoS: Liquid crystal on silicon
4 General requirements for measurement
4.1 General description
Unless otherwise specified, the voltage values, which are given in this standard, are
valid values.
4.2 Performance measurement conditions
4.2.1 Environmental conditions
Unless otherwise specified, the following measurements are made, under standard
atmospheric conditions:
- Ambient temperature: 15 °C ~ 35 °C, preferably 25 °C;
- Relative humidity: 25% ~ 75%;
- Air pressure: 86 kPa ~ 106 kPa.
4.2.2 Power condition
The power conditions are as follows:
- Power supply voltage: AC 209 V ~ 231 V;
- Power frequency: 49 Hz ~ 51 Hz;
- Harmonic component: ±5%.
4.2.3 Measurement conditions
The measurement conditions are as follows:
a) The measurement shall be carried out in a dark room, where the stray illumination
is less than or equal to 0.5 lx;
b) The measurement shall use the matching lens of the projector;
c) The room volume shall be able to meet the requirements for screen size, which is
given by the projector.
4.3 Measuring instruments
4.3.1 Illuminometer
The illuminometer requirements are as follows:
a) Illuminance measurement range: 0.1 lx ~ 50000 lx:
b) Illuminance measurement accuracy: ±2% (0.1 lx ~ 10 lx), ±5% (10 lx ~ 50000 lx):
c) Chromatic values can be measured: u', v' or x, y;
d) Chromatic measurement accuracy: ±0.002.
Note: Please refer to Appendix A, for the conversion formula of (u', v') and (x, y).
4.3.2 Video signal generator
The test signal diagram shall have the following types:
- A1: Limit eight grayscale signal;
- A2: Color bar signal;
- A3: All-white field signal and all-black field signal;
-A4: Location map of uniformity test points;
- A5: Black and white window signal;
- A6: Single pixel signal;
- A7: Composite test diagram;
- A8: All-red field, all-green field, all-blue field signals;
- A9: White window signal;
- A10: All-white field, all-grey field and all-black field signals with areas A and B;
- A11: All-red field, all-green field, all-blue field signals with areas and A areas B;
- A12: Red, green, blue three primary color matrix test signal.
4.4.2 Extreme eight grayscale signal
See 5.5 in GB/T 26270-2010, for the description and examples of test diagram.
4.4.3 Color bar signal
See 5.3 in GB/T 26270-2010, for the description and examples of test diagram.
4.4.4 All-white field signal and all-black field signal
See 5.4 in GB/T 26270-2010, for the description and examples of test diagram.
4.4.5 Location map of uniformity test points
See Figure D.2 in GB/T 26270-2010, for the description and examples of test diagram.
4.4.6 Black and white window signal
See 5.8 in GB/T 26270-2010, for the description and examp...