Skip to product information
1 of 12

PayPal, credit cards. Download editable-PDF & invoice in 1 second!

QC/T 970-2014 English PDF (QCT970-2014)

QC/T 970-2014 English PDF (QCT970-2014)

Regular price $145.00 USD
Regular price Sale price $145.00 USD
Sale Sold out
Shipping calculated at checkout.
Quotation: In 1-minute, 24-hr self-service. Click here QC/T 970-2014 to get it for Purchase Approval, Bank TT...

QC/T 970-2014: Passenger car air filter technical specification

This Standard specifies the technical requirements, test methods and inspection rules of the air filters for passenger cars (hereinafter referred to as air filters) and the filter elements. Since filter element is the core element of the air filter, all the technical requirements thereof are applicable to the air filter.
QC/T 970-2014
QC
AUTOMOTIVE INDUSTRY STANDARD
OF THE PEOPLE REPUBLIC OF CHINA
ICS 43.060.20
T 13
Passenger car air filter technical specification
ISSUED ON. MAY 6, 2014
IMPLEMENTED ON. OCTOBER 1, 2014
Issued by. Ministry of Industry and Information Technology of the
PEOPLE Republic of China.
Table of Contents
Foreword ... 7
Introduction ... 8
1 Scope ... 10
2 Normative references ... 10
3 Terms and definitions ... 11
4 Requirements ... 12
5 Test methods ... 15
6 Inspection rules ... 22
Annex A (Normative) Test devices ... 24
Appendix.
Number, name, and date of implementation of 32 automotive industry
standards
No. Standard number Standard name
Number of
standard replaced
Date of
implementation
1 QC/T 231-2014 Specification of kick-starter for motorcycles and mopeds QC/T 231-1997 October 01,
2 QC/T 233-2014
Performance and measurement
method for static intensity of
motorcycles and mopeds
QC/T 233-1997 October 01, 2014
3 QC/T 66-2014 Wet clutch for moped and motorcycles QC/T 66-1993
October 01,
4 QC/T 962-2014 Technical specifications for coating of motorcycles and moped October 01,
5 QC/T 680-2014
General technical specifications for
voltage regulators for motorcycles and
moped
QC/T 680-2002 October 01, 2014
6 QC/T 963-2014 Drum brakes of motorcycles and mopeds wheels
October 01,
7 QC/T 234-2014
General technical specifications for
steering shaft for motorcycles and
moped
QC/T 234-1997 October 01, 2014
8 QC/T 964-2014 The strength of plastic seats and their anchorages for city buses October 01,
9 QC/T 644-2014 Technical specifications for automotive metallic fuel tank QC/T 644-2000
QC/T 488-2000
October 01,
10 QC/T 965-2014 Driver of electric rear-view mirrors for motor vehicles October 01,
11 QC/T 966-2014 Technical specifications for automotive plastic parts coatings October 01,
12 QC/T 459-2014 Truck with loading crane QC/T 459-2004 October 01, 2014 13 QC/T 29106-2014
Technical specification of automobile
wire harness QC/T 29106-2004
October 01,
14 QC/T 198-2014 General technical specification for automotive switch QC/T 198-1995 October 01,
15 QC/T 220-2014 Technical specifications for automotive fusible links QC/T 220-1996 October 01,
16 QC/T 967-2014 Port fuel injector for gasoline engine October 01, 2014 17 QC/T 968-2014
Determination methods of platinum,
palladium and rhodium contents in
metallic catalytic converters
October 01, 2014
18 QC/T 969-2014 Interior truck release for compartment of a passenger car October 01,
19 QC/T 636-2014 Electric window regulator specification for vehicles QC/T 636-2000 October 01,
20 QC/T 970 2014 Passenger car air filter technical specification
October 01,
21 QC/T 971-2014 Specification of air filter element for motorcycles and scooters October 01,
22 QC/T 972-2014
Technical requirements and test
method for motor vehicle-
electronically controlled hydraulic
power steering gear
October 01, 2014
23 QC/T 299.1-2014
Automotive hydraulic steering power
pump ?€? Part 1. Technical
requirements
QC/T 299-2000 October 01, 2014
24 QC/T 299.2-2014
Automotive hydraulic steering power
pump ?€? Part 2. Test methods QC/T 299-2000
October 01,
25 QC/T 563-2014 Performance and test methods for automobile steering wheel QC/T 563-1999 October 01,
26 QC/T 29097-2014
The technical specifications of
automobile steering gear QC/T 29097-1992
October 01,
27 QC/T 29096-2014
The bench test methods of
automobile steering gear QC/T 29096-1992
October 01,
28 QC/T 303-2014
Technical requirements and test
methods for motor vehicles oil
reservoir
QC/T 303-1999 October 01, 2014
29 QC/T 301-2014
Technical requirements and test
methods for motor vehicles power
cylinder
QC/T 301-1999
QC/T 302-1999
October 01,
30 QC/T 70-2014
Measurement method of acoustic
noise for engines of motorcycles and
mopeds
QC/T 70-1993 October 01, 2014
31 QC/T 226-2014
Specification of brake shoes
assembly and brake lining assembly
for motorcycles and moped
QC/T 226-1997 October 01, 2014
32 QC/T 593-2014
Performance requirements and bench
test methods of automobile hydraulic
proportional valve
QC/T 593-1999 October 01, 2014
Introduction
There is no corresponding international standard, foreign standard, national and industry standard with regard to passenger car air filter technical specification. Both domestic and foreign automobile companies and air filter manufacturers have developed technical specifications for their respective enterprises and models. Therefore, there are differences in main properties, technical parameters and test methods. In order to improve the industry standard system of automobile filters, to drive the technological progress of air filters for passenger cars, and to promote trade and communication, it is necessary to formulate this Standard.
The primary function of the air filters for passenger cars is to clean and filter the air entering the engine for combustion. In view of the distinguishing features such as combustion modes of the gasoline engines, diesel engines and gas engines equipped for passenger cars, calorific value and density of fuel, vehicle maintenance cycle, reliability mileage, etc., while maintaining the contents of conventional filter function index, the disparity index was determined for the two properties of full-life filter efficiency and ash storage capacity, respectively. One of the main functions of the air filters for passenger cars is to eliminate engine intake noise, which has played an important role in reducing the vehicle pass-by noise and noise inside automobile. In the past, the acoustic attenuation performance of the air filters for passenger cars was normally evaluated on the engine bench or full vehicle under prescribed conditions. Test operation is difficult, and the test results affected by the noise sources are lack of comparability. Therefore, the requirements for such technology are almost vacant in relevant domestic standards and product drawings. In this case, it is particularly looking forward to developing adaptive technical requirements and test methods for intake silencing performance, based on the noise elimination characteristics of the passenger car air filter structure. This Standard describes the performance requirements and test methods for sound-transmission loss and surface radiation noise of the air filters for passenger cars, by using white noise as the noise source and adopting the latest measurement principle of two-load method, in order to fill the vacancy and build the technical framework. With regard to air filters for passenger cars, the vibration fatigue test is mainly used to avoid failure and damage caused by fatigue; the fixed-frequency sinusoidal vibration test is simple to control and easy for test operation, but it cannot reflect the real state of mechanical vibration environment of the air filter. Consequently, according to the application of air filters in the passenger cars, it is recommended that two test methods of sinusoidal vibration and sinusoidal- random composite vibration, with different requirements for vibration severity, Passenger car air filter technical specification
1 Scope
This Standard specifies the technical requirements, test methods and
inspection rules of the air filters for passenger cars (hereinafter referred to as air filters) and the filter elements. Since filter element is the core element of the air filter, all the technical requirements thereof are applicable to the air filter. This Standard is applicable to the air filters for passenger cars and filter elements with a volume flow of below 900m3/h. Other air filters and filter elements may use this Standard for reference.
2 Normative references
The following documents are essential to the application of this document. For dated references, only the editions with the dates indicated are applicable to this document. For undated references, only the latest editions (including all the amendments) are applicable to this document.
GB/T 2298-1991 Mechanical vibration and shock - Terminology
GB/T 2423.56-2006 / IEC 60068-2-64.1993 Environmental testing for electric and electronic products - Part 56. Test methods - Test Fh. Vibration, broad- band random (digital control) and guidance
GB/T 2423.58-2008 / IEC 60068-2-80.2005 Environmental testing for electric and electronic products - Part 58. Test methods - Test Fi. Vibration - Mixed mode
GB 3240 Preferred frequencies for the acoustical measurement
GB/T 3241-1998 Octave-band and fractional-octave-band filters
GB/T 3730.1-2001 Motor vehicles and trailers - Types - Terms and definitions GB/T 3785.1-2010 Electroacoustics - Sound level meters - Part 1.
Specifications
GB/T 3947-1996 Acoustical terminology
GB/T 4760-1995 Acoustics - Measurement procedure for silencers
The sealing parts of the air filter shall be sealed in a reliable manner. Overhaul shall be performed immediately upon the completion of the filter efficiency test or ash storage capacity test. The sealing parts of the air filter shall have no trace of ash leakage.
4.2.9 Condition pressurize performance.
Under the effect of 5kPa vacuum, ambient air leakage on the clean air side of the air filter shall not be greater than 100L/h.
4.2.10 Isolation noise performance of the air filter.
Within the center frequency range of (50 ~ 10000) Hz at 1/3 octave, the radiation noise attenuation value on the upper surface of the air filter shall not be less than 35dB.
4.2.11 Sound-transmission loss of the air filter.
Within the center frequency range of (50 ~ 10000) Hz at 1/3 octave, the sound- transmission loss at the center...

View full details