This Standard specifies the requirements for material identification and marking of automotive plastic, rubber and thermoplastic elastomer parts. This Standard applies to material identification and marking of automotive plastic with the mass exceeding 100 g, rubber with the mass exceeding 200 g and thermoplastic elastomer parts, this Standard does not apply to identification and marking of automotive tires. For the product with the mass lower than the value specified in this Standard, this Standard can be referenced.
Basic Data
Standard ID
QC/T 797-2008 (QC/T797-2008)
Description (Translated English)
Material identification and marking of automotive plastic, rubber and thermoplastic elastomer parts
Sector / Industry
Automobile and Vehicle Industry Standard (Recommended)
Classification of Chinese Standard
T40
Classification of International Standard
43.040.99; 43.040.01
Word Count Estimation
10,183
Date of Issue
2008-02-01
Date of Implementation
2008-07-01
Quoted Standard
GB/T 1844.1; GB/T 1844.2; GB/T 1844.3; GB/T 2035; GB/T 5576; GB 5577; GB/T 15237.1; ISO 1043-4; ISO 18064
Adopted Standard
ISO 11469-2000, MOD
Regulation (derived from)
NDRC Notice No. 11 of 2008
Issuing agency(ies)
Ministry of Industry and Information Technology
Summary
This standard specifies the automotive plastic parts, rubber parts and pieces of thermoplastic elastomer material identification and marking requirements. This standard applies to the quality of automotive plastic parts over 100g, 200g of mass exceeding thermoplastic elastomer rubber parts and pieces of material identification and marking, but not for the identification and marking tires. Quality products than specified in this standard, you can refer to this standard.
