QB/T 1862-2011 English PDF (QBT1862-2011)

Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click QB/T 1862-2011
Historical versions: QB/T 1862-2011
Preview True-PDF (Reload/Scroll if blank)

QB/T 1862-2011: Hair oil
QB/T 1862-2011
LIGHT INDUSTRY STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 71.100.72
Classification number: Y42
Filing number: 34959-2012
Replacing QB/T 1862-1993
Hair oil
发油
ISSUED ON: DECEMBER 30, 2011
IMPLEMENTED ON: JULY 01, 2012
Issued by: Ministry of Industry and Information Technology of PRC
Table of Contents
Foreword ... 3 
1 Scope ... 5 
2 Normative references ... 5 
3 Classification ... 6 
4 Requirements ... 6 
5 Test method ... 7 
6 Inspection rules ... 10 
7 Marking, packaging, transport, storage, shelf life ... 10 
Hair oil
1 Scope
This standard specifies the classification, requirements, test methods,
inspection rules and marking, packaging, transportation, storage, shelf life of
hair oil.
This standard applies to hair products formulated with mineral oil,
organosiloxane, animal and vegetable oils, synthetic oils, other moisturizing
ingredients that moisturize, protect, beautify hair.
2 Normative references
The following documents are essential to the application of this document. For
the dated documents, only the versions with the dates indicated are applicable
to this document; for the undated documents, only the latest version (including
all the amendments) are applicable to this standard.
GB 5296.3 Instruction for use of consumer products - General labelling for
cosmetics
GB/T 22731 Fragrance compound
GB/T 13531.1 General methods on determination of cosmetics -
Determination of pH
GB/T 13531.4 General methods on determination of cosmetics -
Determination of relative density
GB/T 14449-2008 Test method for aerosol products
BB 0005 Marking of aerosol product
QB 2549-2002 Safety regulation for aerosol products with LPG and/or DME
as propellants
QB/T 1684 Inspecting rules for cosmetics
QB/T 1685 Requirements of packaging appearance for cosmetic products
JJF 1070 Rules of metrological testing for net quantity of products in
prepackages with fixed content
Identify it by smelling.
5.3 Physical-chemical indicators
5.3.1 pH
Take the specimen. Put it into a 50 mL separatory funnel. Leave it for
stratification. Take the lower clear solution to measure it according to the
method of GB/T 13531.1 (direct measurement method).
5.3.2 Relative density
It is performed according to the method of GB/T 13531.4.
5.3.3 Cold-resistance
5.3.3.1 Instruments
Refrigerator, temperature control accuracy ± 2°C.
5.3.3.2 Operation
Place the specimen in the refrigerator pre-adjusted to -5°C ~ -10°C. Take it out
after 24 h. Observe the bottled hair oil after returning to room temperature; the
aerosol canned hair oil can be used normally after returning to temperature
5.3.4 Spray rate
It is performed according to the method of 5.10 in GB/T 14449-2008.
5.3.5 Number of sprays
Press the pump-type hair oil until the liquid starts to spray. Count the number of
presses.
5.3.6 Internal pressure
Determine it according to the test method of internal pressure of 5.1 in GB/T
14449-2008.
5.4 Hygienic indicator
It is tested according to the method specified in "Hygienic specifications for
cosmetics".
5.5 Net content
5.5.1 Aerosol canned product with net content marked in milliliters
It is determined according to the method of JJF 1070.
5.6 Requirements for packaging appearance
It is performed according to QB/T 1685.
6 Inspection rules
6.1 This standard is divided into conventional inspection items and
unconventional inspection items.
The conventional inspection items are the sensory indicators, physical-
chemical indicators, total number of colonies in hygienic indicators, net content,
packaging appearance requirements. The rest is unconventional inspection
items.
6.2 Inspection classification shall be carried out according to QB/T 1684.
6.3 The group-batch rules and sampling plan shall be implemented in
accordance with QB/T 1684.
6.4 The sampling method shall be implemented according to QB/T 1684.
6.5 The judgment and re-inspection rules shall be implemented in accordance
with QB/T 1684.
6.6 The transfer rules are implemented according to QB/T 1684.
6.7 The suspension and resumption of inspection shall be carried out according
to QB/T 1684.
7 Marking, packaging, transport, storage, shelf life
7.1 Marking
The markings of the sales package shall be implemented in accordance with
the provisions of GB 5296.3 and indicated of the instructions for use of the
product. The aerosol canned products shall also comply with the provisions of
BB 0005.
The markings for the product’s bulk packaging shall comply with the provisions
of 6.1.2 in QB 2549-2002.
7.2 Packaging
It shall be implemented in accordance with the provisions of QB/T 1685;