Q/BQB 400-2018 English PDF (QBQB400-2018)

Delivery: 3 seconds. Download true-PDF + Invoice.Newer version: (Replacing this standard) QBQB400-2020
Get QUOTATION in 1-minute: Click Q/BQB 400-2018
Historical versions: Q/BQB 400-2018
Preview True-PDF (Reload/Scroll if blank)

Q/BQB 400-2018: Package, mark and inspection document for cold-roll product
Q/BQB 400-2018
BQB
ENTERPRISE STANDARD OF BAOSHAN
IRON and STEEL CO., LTD.
Replacing Q/BQB 400-2014
Package, mark and inspection
document for cold-rolled product
ISSUED ON. JANUARY 15, 2018
IMPLEMENTED ON. APRIL 10, 2018
Issued by. Baoshan Iron and Steel Co., Ltd.
Table of Contents
Foreword ... 3 
1 Scope ... 4 
2 Normative references ... 4 
3 General requirements ... 4 
4 Package of steel sheet ... 5 
5 Package of steel coil ... 6 
6 Mark ... 6 
7 Inspection document ... 6 
Appendix A (Informative) Functions of packaging components ... 17 
Foreword
This Standard is drafted in accordance with the rules given in GB/T 1.1-2009
“Directives for standardization - Part 1. Structure and drafting of standards”.
This Standard replaces Q/BQB 400-2014.
As compared with Q/BQB 400-2014, the main changes of this Standard are as
follows.
- ADD the wrapping packaging mode for steel coil packaging;
- In Appendix A, ADD packaging components for wrapping packaging.
Appendix A of this Standard is an informative appendix.
This Standard was proposed by Products and Technique Management
Department of Baoshan Iron and Steel Co., Ltd..
This Standard shall be under the jurisdiction of Products and Technique
Management Department of Baoshan Iron and Steel Co., Ltd..
This Standard was drafted by Products and Technique Management Department
of Baoshan Iron and Steel Co., Ltd..
Drafter of this Standard. Hu Ling.
The previous editions replaced by this Standard were released as follows.
Q/BQB 400-1990, Q/BQB 400-1994, Q/BQB 400-1999, Q/BQB 400-2002,
Q/BQB 400-2003, Q/BQB 400-2005, Q/BQB 400-2009, Q/BQB 400-2014.
Package, mark and inspection
document for cold-rolled product
1 Scope
This Standard specifies the requirements for package, mark, and inspection
document for cold-rolled steel sheets and strips, coated steel sheets and strips,
and cold-rolled electrical steel strips (coils). Considering the using habit of
manufacturers and cold-rolled product users, steel strips are hereinafter known
as steel coils.
2 Normative references
The following documents are indispensable for the application of this Standard.
For the dated references, only the editions with the dates indicated are
applicable to this Standard. For the undated references, the latest edition
(including all the amendments) are applicable to this Standard.
GB/T 18253-2000 Steel and steel products - Types of inspection documents
3 General requirements
3.1 Steel sheets and coils shall be packaged neatly and bundled sturdily. The
mark writing shall be clear and shall be firmly attached. The packaging shall be
able to ensure that the product, during normal transportation and storage, is not
loose, damp, deformed, and damaged.
Note 1. It is generally believed that product packaging cannot reduce the risk of oxidation
on the surface of product. It is mainly because the current product packaging cannot fully
achieve 100% air-tight and water-tight, the product 100% surface oxidation resistance
cannot be guaranteed.
Note 2. The preconditions for packaging to provide sufficient surface protection for the
product are as follows. ① In the process of logistics, all parties shall, according to the
requirements of the specification, handle, transport, and store the product; ② The product
shall be put into use within the time specified by the standard.
Note 3. In order to avoid the loss to users caused by the oxidation of the surface of product,
users are advised to do the following. ① After the product packaging is found to be
damaged, the breakage of the packaging shall be repaired and sealed again; ② It shall try
to avoid exposing the product (including packaging) to harsh weather conditions; ③ It shall
preferentially store the product (including packaging) in temperature-controlled
warehouses, to avoid large temperature fluctuations in the warehouse, resulting in product
internal condensation; ④ After the product is partially used, the remaining product shall be
re-packaged and sealed.
3.2 Packaging materials shall comply with the relevant laws and regulations.
Note 1. All packaging materials comply with the European packaging waste directive
(1994/62/EC); and do not contain heavy metals restricted by this directive.
Note 2. In order to build a green industry chain, we will continue to reduce redundant
packaging, to minimize the amount of packaging waste.
3.3 For steel strip packaging, when performing the work of dismantling the
packaging, the purchaser shall take appropriate protective measures, to
prevent the steel strip head from ejecting and injuring people.
Note. Dismantling of product packaging is a work with a certain degree of risk. The user
must take appropriate measures, to ensure the safety of the workers and equipment
property.
3.4 A functional description of the relevant packaging components can be found
in the informative Appendix A. Under the premise of ensuring the quality of
packaging, the supplier can independently choose the appropriate packaging
components to replace the packaging components specified in this Standard.
3.5 The packaging type (mode) and packaging components of steel sheets and
coils are specified by the supplier. If the purchaser has special requirements on
the packaging components, packaging type (mode), bundle (package) weight,
etc., they shall be negotiated at the time of ordering and indicated in the contract.
4 Package of steel sheet
4.1 The packaging type and mode of steel sheet are shown in Table 1 and
Figure 1 ~ Figure 4.
4.2 For the packaging type (mode) 1~2 of cold-rolled, galvanized, and color-
coated steel sheet products, the supplier can choose to bundle without a catch.
At this time, the lock catch is cancelled.
4.3 The packaging code of steel sheet is set after the packaging components
are appropriately increased or decreased on the basis of Figure 1 ~ Figure 4.
5 Package of steel coil
5.1 The horizontal packaging type (mode) of steel coil is shown in Table 2 and
Figure 5 ~ Figure 10.
5.2 The vertical packaging type (mode) of steel coil is shown in Table 3 and
Figure 11.
5.3 The packaging code of steel coil is set after the packaging components are
appropriately increased or decreased on the basis of Figure 5 ~ Figure 11.
6 Mark
Mark contents may include as required. trademark, supplier name, product
name, standard or technical conditions, specification, bundle number, user
contract number, furnace number, coating weight, color, date of manufacture,
weighting method, net weight, gross weight, receiving organization, protective
signs, stacking mark, certification mark, etc..
7 Inspection document
7.1 Normally, the types of inspection documents shall comply with the
provisions of inspection document type “5.1 B” in GB/T 18253. That is, the
inspection representative authorized by the manufacturer and independent of
the production department shall, according to the specified inspection and test
requirements, carry out inspection and test, and issue inspection document.
Through negotiation between the supplier and the purchaser, and indicated in
the contract, other types of inspection documents may also be provided.
7.2 The content of inspection document may be indicated as required. supplier
name, trademark, product name, product ordering standard or technical
conditions, product specification, steel coil number or bundle number, user
contract number, furnace number, coating type, coatin...