JB/T 8010.3-1999 English PDF (JBT8010.3-1999)

Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click JB/T 8010.3-1999
Historical versions: JB/T 8010.3-1999
Preview True-PDF (Reload/Scroll if blank)

JB/T 8010.3-1999: The parts and units of jigs and fixtures. Moving bend clamp plate
JB/T 8010.3-1999
JB
MECHANICAL INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 25.080.01
J44
Replacing JB/T 8010.3-1995
The parts and units of jigs and fixtures - Moving bend clamp
plate
ISSUED ON: AUGUST 06, 1999
IMPLEMENTED ON: JANUARY 01, 2000
Issued by: State Administration of Machinery Industry
Table of Contents
1 Scope ... 3
2 Normative references ... 3
3 Dimensions ... 3
4 Technical conditions ... 4
5 Marking ... 5
The parts and units of jigs and fixtures - Moving bend clamp
plate
1 Scope
This standard specifies the moving bend clamp plate applicable to thread specifications
of M6 ~ M42.
2 Normative references
The provisions contained in the following standards constitute the provisions of this
standard through reference in this standard. When this standard is published, the
versions shown are valid. All standards are subject to revision, and parties using this
standard should explore the possibility of using the latest version of the following
standards.
GB/T 699-1988 Quality carbon structure steel - Technical requirements
JB/T 8044-1999 Specifications for parts and units of jigs and fixtures
3 Dimensions
The dimensions are shown in the following Figure and Table.