GB/T 8812.2-2007 English PDF (GB/T8812.2-2007)

GB/T 8812.2-2007: Rigid cellular plastics -- Determination of flexural properties -- Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
Delivery: 9 seconds. Download (& Email) true-PDF + Invoice.
Get Quotation: Click GB/T 8812.2-2007 (Self-service in 1-minute)
Historical versions (Master-website): GB/T 8812.2-2007
Preview True-PDF (Reload/Scroll-down if blank)

GB/T 8812.2-2007
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 83.100
G 32
GB/T 8812.2-2007 / ISO 1209-2:2004
Rigid cellular plastics -- Determination of flexural properties
-- Part 2: Determination of flexural strength and apparent
flexural modulus of elasticity
(ISO 1209-2:2004, IDT)
ISSUED ON: DECEMBER 05, 2007
IMPLEMENTED ON: SEPTEMBER 01, 2008
Issued by: State Administration for Market Regulation;
Standardization Administration of the People's Republic of China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Principle ... 4
4 Apparatus ... 5
5 Specimen ... 6
6 Procedure ... 7
7 Expression of results ... 8
8 Precision ... 8
9 Test report ... 9
Foreword
GB/T 8812 "Rigid cellular plastics -- Determination of flexural properties" is divided
into two parts:
- Part 1: Basic flexural test;
- Part 2: Determination of flexural strength and apparent flexural modulus of
elasticity.
This Part is Part 2 of GB/T 8812, corresponding to ISO 1209-2:2004 "Rigid cellular
plastics - Determination of flexural properties - Part 2: Determination of flexural
strength and apparent flexural modulus of elasticity". This Part identically adopts ISO
1209-2:2004 and only makes few editorial modifications. In terms of technical content
and writing methods, it is completely identical to ISO 1209:2:2004.
This Part was proposed by China Light Industry Federation.
This Part shall be under the jurisdiction of National Technical Committee on Plastic
Products of Standardization Administration of China.
The drafting organizations of this Part: Beijing Institute of Plastics and Beijing
University of Commerce.
Main drafters of this Part: Pu Junjie, Chen Qian.
This Part is issued for the first time.
Rigid cellular plastics -- Determination of flexural properties
-- Part 2: Determination of flexural strength and apparent
flexural modulus of elasticity
1 Scope
This Part of GB/T 8812 specifies the determination methods for flexural strength and
apparent flexural modulus of elasticity of rigid cellular plastics.
2 Normative references
The following documents contain the provisions which, through reference in this Part
of GB/T 8812, become the provisions of this Part. For dated references, their subsequent
amendments (excluding corrigendum) or revisions do not apply to this Part. However,
the parties who enter into agreement based on this Part are encouraged to investigate
whether the latest versions of these documents are applicable. For undated reference
documents, the latest versions apply to this Part.
GB/T 2918, Plastics -- Standard atmospheres for conditioning and testing (GB/T
2918-1998, idt ISO291:1997)
GB/T 6342, Cellular plastics and rubbers -- Determination of linear dimensions
(GB/T 6342-1996, idt ISO1923:1981)
3 Principle
A load is applied at a uniform rate by means of a loading edge to a test specimen
supported at two positions. The load is applied perpendicularly to the specimen at a
position midway between the supporting positions (see Figure 1). The load/deformation
curve is recorded. From the curve, the flexural strength and the apparent flexural
modulus of elasticity are calculated.
used for statistical evaluation of the repeatability (5 test results).
The results, analysed in accordance with ISO 5725:1986, Precision of test methods -
Determination of repeatability and reproducibility for a standard test method by inter-
laboratory tests (now withdrawn), are given in Table 2.
9 Test report
The test report shall include the following information:
a) a reference to this Part of GB/T 8812;
b) complete identification of all necessary details of the sample;
c) the presence or absence of skins or facings on the test specimens and, if applicable,
on which faces;
d) the conditioning procedure used;
e) specimen dimensions and test conditions (span of two supports, speed of loading
pressure, test temperature, and test humidity);;
f) the relationship between the direction of force application and the direction of
anisotropy;
g) single test result of flexural strength, in kilopascals (kPa);
h) the individual test result of apparent flexural modulus of elasticity, in kilopascals
(kPa);
i) single test result of fracture load (when applicable), in Newton (N);
j) the arithmetic mean of flexural strength;
k) the arithmetic mean of the flexural modulus of elasticity;
l) the arithmetic mean of the breaking load (when applicable);
m) any details that differ from the provisions of this section and any events that may
affect the results;
Chinese Standards
This is an excerpt of the PDF (Some pages are marked off intentionally)
Full-copy PDF can be purchased from 1 of 2 websites:
1. https://www.ChineseStandard.us
 SEARCH the standard ID, such as GB 4943.1-2022.
 Select your country (currency), for example: USA (USD); Germany (Euro).
 Full-copy of PDF (text-editable, true-PDF) can be downloaded in 9 seconds.
 Tax invoice can be downloaded in 9 seconds.
 Receiving emails in 9 seconds (with download links).
 SEARCH the standard ID, such as GB 4943.1-2022.
 Full-copy of PDF (text-editable, true-PDF) can be downloaded in 9 seconds.
 Receiving emails in 9 seconds (with PDFs attached, invoice and download links).
Translated by: Field Test Asia Pte. Ltd. (Incorporated and taxed in Singapore. Tax ID: 201302277C)
Linkin: https://www.linkedin.com/in/waynezhengwenrui/
------ The End ------
GB/T 8812.2-2007
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 83.100
G 32
GB/T 8812.2-2007 / ISO 1209-2:2004
Rigid cellular plastics -- Determination of flexural properties
-- Part 2: Determination of flexural strength and apparent
flexural modulus of elasticity
(ISO 1209-2:2004, IDT)
ISSUED ON: DECEMBER 05, 2007
IMPLEMENTED ON: SEPTEMBER 01, 2008
Issued by: State Administration for Market Regulation;
Standardization Administration of the People's Republic of China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Principle ... 4
4 Apparatus ... 5
5 Specimen ... 6
6 Procedure ... 7
7 Expression of results ... 8
8 Precision ... 8
9 Test report ... 9
Foreword
GB/T 8812 "Rigid cellular plastics -- Determination of flexural properties" is divided
into two parts:
- Part 1: Basic flexural test;
- Part 2: Determination of flexural strength and apparent flexural modulus of
elasticity.
This Part is Part 2 of GB/T 8812, corresponding to ISO 1209-2:2004 "Rigid cellular
plastics - Determination of flexural properties - Part 2: Determination of flexural
strength and apparent flexural modulus of elasticity". This Part identically adopts ISO
1209-2:2004 and only makes few editorial modifications. In terms of technical content
and writing methods, it is completely identical to ISO 1209:2:2004.
This Part was proposed by China Light Industry Federation.
This Part shall be under the jurisdiction of National Technical Committee on Plastic
Products of Standardization Administration of China.
The drafting organizations of this Part: Beijing Institute of Plastics and Beijing
University of Commerce.
Main drafters of this Part: Pu Junjie, Chen Qian.
This Part is issued for the first time.
Rigid cellular plastics -- Determination of flexural properties
-- Part 2: Determination of flexural strength and apparent
flexural modulus of elasticity
1 Scope
This Part of GB/T 8812 specifies the determination methods for flexural strength and
apparent flexural modulus of elasticity of rigid cellular plastics.
2 Normative references
The following documents contain the provisions which, through reference in this Part
of GB/T 8812, become the provisions of this Part. For dated references, their subsequent
amendments (excluding corrigendum) or revisions do not apply to this Part. However,
the parties who enter into agreement based on this Part are encouraged to investigate
whether the latest versions of these documents are applicable. For undated reference
documents, the latest versions apply to this Part.
GB/T 2918, Plastics -- Standard atmospheres for conditioning and testing (GB/T
2918-1998, idt ISO291:1997)
GB/T 6342, Cellular plastics and rubbers -- Determination of linear dimensions
(GB/T 6342-1996, idt ISO1923:1981)
3 Principle
A load is applied at a uniform rate by means of a loading edge to a test specimen
supported at two positions. The load is applied perpendicularly to the specimen at a
position midway between the supporting positions (see Figure 1). The load/deformation
curve is recorded. From the curve, the flexural strength and the apparent flexural
modulus of elasticity are calculated.
used for statistical evaluation of the repeatability (5 test results).
The results, analysed in accordance with ISO 5725:1986, Precision of test methods -
Determination of repeatability and reproducibility for a standard test method by inter-
laboratory tests (now withdrawn), are given in Table 2.
9 Test report
The test report shall include the following information:
a) a reference to this Part of GB/T 8812;
b) complete identification of all necessary details of the sample;
c) the presence or absence of skins or facings on the test specimens and, if applicable,
on which faces;
d) the conditioning procedure used;
e) specimen dimensions and test conditions (span of two supports, speed of loading
pressure, test temperature, and test humidity);;
f) the relationship between the direction of force application and the direction of
anisotropy;
g) single test result of flexural strength, in kilopascals (kPa);
h) the individual test result of apparent flexural modulus of elasticity, in kilopascals
(kPa);
i) single test result of fracture load (when applicable), in Newton (N);
j) the arithmetic mean of flexural strength;
k) the arithmetic mean of the flexural modulus of elasticity;
l) the arithmetic mean of the breaking load (when applicable);
m) any details that differ from the provisions of this section and any events that may
affect the results;
Chinese Standards
This is an excerpt of the PDF (Some pages are marked off intentionally)
Full-copy PDF can be purchased from 1 of 2 websites:
1. https://www.ChineseStandard.us
 SEARCH the standard ID, such as GB 4943.1-2022.
 Select your country (currency), for example: USA (USD); Germany (Euro).
 Full-copy of PDF (text-editable, true-PDF) can be downloaded in 9 seconds.
 Tax invoice can be downloaded in 9 seconds.
 Receiving emails in 9 seconds (with download links).
 SEARCH the standard ID, such as GB 4943.1-2022.
 Full-copy of PDF (text-editable, true-PDF) can be downloaded in 9 seconds.
 Receiving emails in 9 seconds (with PDFs attached, invoice and download links).
Translated by: Field Test Asia Pte. Ltd. (Incorporated and taxed in Singapore. Tax ID: 201302277C)
Linkin: https://www.linkedin.com/in/waynezhengwenrui/
------ The End ------