Skip to product information
1 of 6

PayPal, credit cards. Download editable-PDF and invoice in 1 second!

GB/T 728-2020 English PDF (GBT728-2020)

GB/T 728-2020 English PDF (GBT728-2020)

Regular price $125.00 USD
Regular price Sale price $125.00 USD
Sale Sold out
Shipping calculated at checkout.
Quotation: In 1-minute, 24-hr self-service. Click here GB/T 728-2020 to get it for Purchase Approval, Bank TT...

GB/T 728-2020: Tin ingot

This Standard specifies the technical requirements, test methods, inspection rules, marking, packaging, transportation, storage, quality certificate and purchase order (or contract) contents of tin ingot. This Standard applies to tin ingot products which are produced by pyrolysis or electrolysis refining.
GB/T 728-2020
GB
NATIONAL STANDARD OF THE
PEOPLE REPUBLIC OF CHINA
ICS 77.120.60
H 62
Replacing GB/T 728-2010
Tin ingot
??????
ISSUED ON: MARCH 06, 2020
IMPLEMENTED ON: FEBRUARY 01, 2021
Issued by: State Administration for Market Regulation;
Standardization Administration of the PEOPLE Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative references ... 5
3 Technical requirements ... 5
4 Test methods ... 6
5 Inspection rules ... 7
6 Marking, packaging, transportation, storage and quality certificate ... 10 7 Purchase order (or contract) contents ... 11
References ... 13
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009. This Standard replaces GB/T 728-2010 ?€?Ingot tin?€?. Compared with GB/T 728- 2010, the major changes of this Standard are as follows:
-- Modify the lead content in the chemical composition of the designation Sn99.90A from ???0.032 0% to ???0.025 0% (see Table 1; Table 1 of version
2010);
-- Modify the bismuth content in the chemical composition of the designations Sn99.90A and Sn99.90AA, from ???0.015 0% to ???0.020 0% (see Table 1;
Table 1 of version 2010);
-- Modify the silver content in the chemical composition of the designations Sn99.95A, Sn99.95AA, and Sn99.99A, from ???0.000 1% to ???0.000 5% (see
Table 1; Table 1 of version 2010);
-- Modify the sulfur content in the chemical composition of the designations Sn99.90A, Sn99.90AA, Sn99.95A, and Sn99.95AA, from ???0.000 5% to
???0.001 0%; delete the fixed value of the sulfur content in the chemical composition of the designation Sn99.99A (See Table 1; Table 1 of version 2010);
-- Delete definitions, symbols, units and abbreviations (see Chapter 3 of version 2010);
-- Add arbitration sampling and preparation methods (cutting method) (see 5.4.2.2);
-- Add the marking method of packaging into bundles, which is recommended to be performed according to YS/T 1209 (see 6.1.2).
This Standard was proposed by the China Nonferrous Metals Industry
Association.
This Standard shall be under the jurisdiction of National Technical Committee 243 on Nonferrous Metals of Standardization Administration of China (SAC/TC 243).
The drafting organizations of this Standard: Yunnan Tin Group (Holding) Co., Ltd., Guangxi China Tin Group Co., Ltd., Yunnan Chengfeng Non-ferrous
Metals Co., Ltd., China Nonferrous Metals Techno-Economic Research Institute. Tin ingot
1 Scope
This Standard specifies the technical requirements, test methods, inspection rules, marking, packaging, transportation, storage, quality certificate and purchase order (or contract) contents of tin ingot.
This Standard applies to tin ingot products which are produced by pyrolysis or electrolysis refining.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 3260, Methods for chemical analysis of tin
GB/T 8170, Rules of rounding off for numerical values and expression and
judgment of limiting values
3 Technical requirements
3.1 Product classification
According to the chemical composition and impurity lead content of tin ingots, it is divided into three designations: Sn99.90, Sn99.95, Sn99.99, and two grades: A high lead and AA low lead.
3.2 Chemical composition
The chemical composition of tin ingot shall meet the requirements of Table 1. 5 Inspection rules
5.1 Inspection and acceptance
5.1.1 The product shall be inspected by the supplier to ensure that the product quality complies with the requirements of this Standard and the purchase order (or the contract); the supplier shall fill in the quality certificate.
5.1.2 The buyer shall inspect the received products in accordance with the provisions of this Standard. If the test result is inconsistent with the provisions of this Standard or the purchase order (or contract), a written form shall be submitted to the supplier; the issue shall be settled by negotiation between the supplier and the buyer. Objections of appearance quality shall be filed within one month from the date of receipt of the product; objections of other
performances shall be filed within three months from the date of receipt of the product. If arbitration is required, it shall be determined through negotiation between the supplier and the buyer.
5.2 Batch
Products shall be submitted for acceptance in batches; each batch shall be composed of products of the same designation and the same grade. The weight of each batch of ingots shall not exceed 50 t.
5.3 Inspection items
Each batch of products shall be inspected for chemical composition,
appearance quality, ingot shape and ingot weight. If there are special
requirements, the buyer shall indicate in the purchase order (or contract). 5.4 Sampling and sample preparation
5.4.1 Production sampling and sample preparation
5.4.1.1 The sampling tools shall be cleaned and preheated before sampling. When the casting conditions are reached, respectively take samples before, during and after the casting process of each batch of products to cast specimen. The volume of each sub-sample is not less than 150 g.
5.4.1.2 When preparing the sample, the epidermis shall be removed to ensure that the sample is smooth and flat. Use the sawing method (do not use any lubricant) to make the sample into a chip not larger than 4 mm; use a magnet to remove the scrap iron which is brought in during processing; mix well and divide it to no less than 20 g as the tin ingot samples of this batch; when using the mechanical method (no lubricants are allowed), make the samples into smooth and flat to-be-tested samples.
b) Product name:
c) Designation, grade;
d) Production batch number;
e) Bundle number;
f) Net weight;
g) Number of ingots;
h) Place of origin.
6.2 Packaging, transportation, storage
6.2.1 Pack the tin ingots in bundles, or pack as required by the buyer's contract. 6.2.2 The tin ingots shall be protected from rain and chemical agents during transportation and storage. The long-term storage temperature shall not be lower than 13.2 ??C.
6.3 Quality certificate
Each batch of tin ingots is accompanied by a quality certificate, which indicates: a) Supplier?€?s name, address, telephone, fax;
b) Product name, trademark;
c) Designation, grade, batch number;
d) Net weight and number of pieces;
e) Analysis and inspection results and the imprint of the technical supervision department;
f) Code of this Standard;
g) Date of delivery.
7 Purchase order (or contract) contents
The purchase order (or contract) for tin ingots which is listed in this Standard shall include the following:
a) Product name;
b) Designation, grade;

View full details