GB/T 38974-2020 English PDF (GBT38974-2020)

Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click GB/T 38974-2020
Historical versions: GB/T 38974-2020
Preview True-PDF (Reload/Scroll if blank)

GB/T 38974-2020: Niobium and niobium alloy powder for additive manufacturing
GB/T 38974-2020
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 77.160;25.030
H 71
Niobium and niobium alloy powder for additive
manufacturing
ISSUED ON: JULY 21, 2020
IMPLEMENTED ON: JUNE 01, 2021
Issued by: State Administration for Market Regulation;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Technical requirements ... 4
4 Test method ... 6
5 Inspection rules ... 7
6 Marking, packaging, transportation, storage and quality certificate ... 8
7 Order form (or contract) contents ... 9
Niobium and niobium alloy powder for additive
manufacturing
1 Scope
This Standard specifies the technical requirements, test methods, inspection rules,
marking, packaging, transportation, storage and quality certificates, and order (or
contract) contents of niobium and niobium alloy powder for additive manufacturing.
This Standard applies to niobium and niobium alloy powder for additive manufacturing
prepared by processes such as plasma rotating electrode method, plasma atomization
method, and plasma spheroidization method.
2 Normative references
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
GB/T 1479 (all parts), Metallic powders - Determination of apparent density
GB/T 1480, Metallic powders - Determination of particle size by dry sieving
GB/T 1482, Metallic powders - Determination of flow time by means of a
calibrated funnel (Hall flowmeter)
GB/T 5162, Metallic powders - Determination of tap density
GB/T 5314, Powders for powder metallurgical purposes - Sampling
GB/T 15076 (all parts), Methods for chemical analysis of tantalum and niobium
GB/T 19077, Particle size analysis. Laser diffraction methods
YS/T 1297, Measuring method for sphericity ratio of titanium and titanium alloy
powders
3 Technical requirements
3.1 Chemical composition
5.4.2 If the product fails the appearance quality inspection, the bottle/bag shall be
judged as unqualified.
6 Marking, packaging, transportation, storage and quality
certificate
6.1 Marking
The product packaging bottle/bag shall be marked (or labeled) as follows:
a) Name of the supplier;
b) Product name:
c) Designation and category;
d) Production batch number;
e) Particle size range;
f) Net weight and gross weight;
g) Packaging date;
h) Code of this Standard;
i) Signs such as “Flammable”, “Fireproof”, “Moisture-proof”, “Upward”, and “No
Tumbling”.
6.2 Packaging
The product shall be packaged in clean metal bottles, plastic barrels or iron barrels, and
shall be protected by inert gas or vacuum packed, or vacuum sealed in thick plastic bags.
The environment shall be strictly controlled during the packaging process to avoid
pollution. The product can be packaged in four specifications of mass: 1 kg, 2 kg, 5 kg
and 10 kg, and can also be packaged as required by the buyer. The packaging container
shall be ensured of its integrity during transportation, and shall not be damaged, damp,
or expose the product to foreign contaminants.
6.3 Transportation
The product shall be transported in a covered environment. It shall be protected from
rain and moisture during transportation. Severe collision and mechanical extrusion are
strictly prohibited. It shall be loaded and unloaded gently during handling, and shall not
be inverted. It is strictly prohibited to approach fire and ignition sources.
6.4 Storage