GB/T 37470-2019 English PDF (GB/T37470-2019)

Delivery: 3 seconds. Download true-PDF + Invoice.
Get Quotation: Click GB/T 37470-2019 (Self-service in 1-minute)
Historical versions (Master-website): GB/T 37470-2019
Preview True-PDF (Reload/Scroll-down if blank)

GB/T 37470-2019: Technical Requirements of Anti-Counterfeiting Structural 3D Code
GB/T 37470-2019
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 13.310
A 90
Technical Requirements of
Anti-Counterfeiting Structural 3D Code
ISSUED ON: MAY 10, 2019
IMPLEMENTED ON: DECEMBER 01, 2019
Issued by: State Administration for Market Regulation;
Standardization Administration of PRC.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative References ... 4
3 Terms and Definitions ... 5
4 Classification ... 5
5 Requirements ... 5
6 Test Methods ... 7
7 Inspection Rules ... 8
8 Marking, Package, transportation, Storage and Safety Measures ... 9
Technical Requirements of
Anti-Counterfeiting Structural 3D Code
1 Scope
This Standard specifies the definition, classification, requirements, test methods,
inspection rules, product marking, package, transportation, storage and safety
measures for the structural 3D code anti-counterfeiting technology products.
This Standard is applicable to the anti-counterfeiting technology products with
structural 3D code.
2 Normative References
The following documents are essential to the application of this document. For the
dated documents, only the versions with the dates indicated are applicable to this
document; for the undated documents, only the latest version (including all the
amendments) are applicable to this document.
GB/T 2828.1-2012 Sampling Procedures for Inspection by Attributea-Part1:
Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-Lot
Inspection
GB/T 17000 Universal Technical Requirements of Holographic Anti-Counterfeiting
Products
GB/T 17004 Anti-Counterfeiting Technological Terminology
GB/T 19425-2003 Universal Technical Requirements of Anti-counterfeiting
Technical Products
GB/T 22258-2008 Universal Technical Requirements of Anti-Counterfeiting Labels
GB/T 22467.3-2008 Universal Technical Requirements of Anti-Counterfeiting
Material - Part 3: Anti-Counterfeiting Film
GB/T 23808-2009 Holographic Anti-Counterfeiting Film
The non-transferrable rate shall be conducted as per the method specified in 6.3 of
GB/T 22258-2008.
6.3.1.2 Die-cutting center deviation
The die-cutting center deviation shall be conducted as per the provisions of 6.10 in
GB/T 22258-2008.
6.3.2 Characteristic indicators of products with anti-counterfeiting film of
structural 3D coded
The characteristic indicators of products with anti-counterfeiting film of structural 3D
coded shall be conducted as per the method specified in 6.4 of GB/T 22467.3-2008.
6.4 Anti-counterfeiting identification characteristics
6.4.1 Characteristics, color layer, graphic color
Visually observe or take magnifier to observe under the D65 standard light source.
6.4.2 Light transmittance
The D65 standard light source was illuminated on the back of the sample and visually
observed.
6.4.3 Characteristic information verification
Through the photographing method, collect the information in the characteristic area
of the image and text; send the collected information to the database for comparison
with the captured standard sample.
7 Inspection Rules
7.1 Batching
Take the deliver batch or trail-production batch of the same type and the same
specification products as a batch.
7.2 Inspection classification
The inspection can be divided into exit-factory inspection and type inspection.
7.3 Exit-factory inspection
7.3.1 The manufacturer shall ensure that the products left the factory shall meet the
requirements of this Standard; each coil (box) of products is attached with product
GB/T 37470-2019
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 13.310
A 90
Technical Requirements of
Anti-Counterfeiting Structural 3D Code
ISSUED ON: MAY 10, 2019
IMPLEMENTED ON: DECEMBER 01, 2019
Issued by: State Administration for Market Regulation;
Standardization Administration of PRC.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative References ... 4
3 Terms and Definitions ... 5
4 Classification ... 5
5 Requirements ... 5
6 Test Methods ... 7
7 Inspection Rules ... 8
8 Marking, Package, transportation, Storage and Safety Measures ... 9
Technical Requirements of
Anti-Counterfeiting Structural 3D Code
1 Scope
This Standard specifies the definition, classification, requirements, test methods,
inspection rules, product marking, package, transportation, storage and safety
measures for the structural 3D code anti-counterfeiting technology products.
This Standard is applicable to the anti-counterfeiting technology products with
structural 3D code.
2 Normative References
The following documents are essential to the application of this document. For the
dated documents, only the versions with the dates indicated are applicable to this
document; for the undated documents, only the latest version (including all the
amendments) are applicable to this document.
GB/T 2828.1-2012 Sampling Procedures for Inspection by Attributea-Part1:
Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-Lot
Inspection
GB/T 17000 Universal Technical Requirements of Holographic Anti-Counterfeiting
Products
GB/T 17004 Anti-Counterfeiting Technological Terminology
GB/T 19425-2003 Universal Technical Requirements of Anti-counterfeiting
Technical Products
GB/T 22258-2008 Universal Technical Requirements of Anti-Counterfeiting Labels
GB/T 22467.3-2008 Universal Technical Requirements of Anti-Counterfeiting
Material - Part 3: Anti-Counterfeiting Film
GB/T 23808-2009 Holographic Anti-Counterfeiting Film
The non-transferrable rate shall be conducted as per the method specified in 6.3 of
GB/T 22258-2008.
6.3.1.2 Die-cutting center deviation
The die-cutting center deviation shall be conducted as per the provisions of 6.10 in
GB/T 22258-2008.
6.3.2 Characteristic indicators of products with anti-counterfeiting film of
structural 3D coded
The characteristic indicators of products with anti-counterfeiting film of structural 3D
coded shall be conducted as per the method specified in 6.4 of GB/T 22467.3-2008.
6.4 Anti-counterfeiting identification characteristics
6.4.1 Characteristics, color layer, graphic color
Visually observe or take magnifier to observe under the D65 standard light source.
6.4.2 Light transmittance
The D65 standard light source was illuminated on the back of the sample and visually
observed.
6.4.3 Characteristic information verification
Through the photographing method, collect the information in the characteristic area
of the image and text; send the collected information to the database for comparison
with the captured standard sample.
7 Inspection Rules
7.1 Batching
Take the deliver batch or trail-production batch of the same type and the same
specification products as a batch.
7.2 Inspection classification
The inspection can be divided into exit-factory inspection and type inspection.
7.3 Exit-factory inspection
7.3.1 The manufacturer shall ensure that the products left the factory shall meet the
requirements of this Standard; each coil (box) of products is attached with product