GB/T 32882-2016 English PDF (GBT32882-2016)

Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click GB/T 32882-2016
Historical versions: GB/T 32882-2016
Preview True-PDF (Reload/Scroll if blank)

GB/T 32882-2016: Material declaration for packaging of electrical and electronic products
GB/T 32882-2016
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 13.020
K 04
Material Declaration for Packaging of Electrical
and Electronic Products
ISSUED ON. AUGUST 19, 2016
IMPLEMENTED ON. MARCH 1, 2017
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China;
Standardization Administration of the People's Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative References ... 4
3 Terms and Definitions ... 4
4 Requirements on Material Declaration for Packaging ... 5
5 Data Format and Data Exchange ... 7
Annex A (Normative) Data Format of Material Declaration for Packaging .. 9
Annex B (Informative) Example of Material Declaration for Packaging ... 15
Annex C (Informative) Examples of Common Packaging ... 18
Bibliography ... 20
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard was proposed by and shall be under the jurisdiction of the National
Technical Committee 297 on Environmental Standardization for Electrical and
Electronic Products and Systems of Standardization Administration of China (SAC/TC
297).
The drafting organizations. Shenzhen Academy of Metrology and Quality Inspection,
China Quality Certification Center, Mechanical and Electrical Products and Vehicles
Testing Center of Jiangsu Entry-Exit Inspection and Quarantine Bureau, Huawei
Technologies Co., Ltd. and Guangdong Shengyi Technology Co., Ltd..
The main drafters of this Standard. Yao Tingting, Ma Qiju, Ye Linquan, Yu Jie, Jiang
Ting, Zhou Jie, Fu Maijin, Zhu Yongguang, Zhao Jiejun, Huang Xunjuan and Chen
Zeyong.
Material Declaration for Packaging of Electrical
and Electronic Products
1 Scope
This Standard specifies the terms and definitions, requirements, data format and data
exchange of material declaration for packaging of electrical and electronic products.
This Standard applies to the production, circulation, use, recycle and disposal of
packaging of electrical and electronic products. This Standard can also be referred to
for material declaration for packaging of other products.
This Standard does not apply to electrical and electronic products themselves.
2 Normative References
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition dated applies to this document. For
undated references, the latest edition of the referenced document (including any
amendments) applies to this Standard.
GB/T 4122.1 Packaging Terms – Part 1. Basic
GB/T 18793 Information Technology – Extensible Markup Language (XML) 1.0
3 Terms and Definitions
For the purpose of this document, the following terms and definitions apply.
3.1 Packaging of electrical and electronic products
A general term of containers, materials and accessories adopted in accordance with
certain techniques, in order to protect electrical and electronic products, facilitate
storage and transportation and promote sales, during the process of circulation.
Note. If an item is a complex with an electrical and electronic product, it is necessary to contain, support
or protect it throughout the life of the electrical and electronic product which is intended to be used,
consumed or disposed of as a whole, so the item is not considered to be packaging.
3.2 Primary packaging
The packaging constituting an individual sales unit and delivered to the consumers.
3.3 Secondary packaging
substance/ substance group in materials to which it belongs; when the reporting
threshold specifies a content in packaging, it shall provide the percentage of a
substance/ substance group in packaging to which it belongs.
d) It shall provide relevant information required by the data exchange for material
declaration. See Annex A for the data format for material declaration for
packaging;
e) The name of a substance/ substance group of an applicable compulsory
standard shall be consistent with those of relevant laws and regulations. The
name of a substance/ substance group of applicable negotiation rules can be in
accordance with the international common names (e.g. IUPAC nomenclature).
It is preferred to add a CAS registration number for identification;
Note 1. IUPAC nomenclature. A compound shall be named in accordance with the naming rules
recommended by IUPAC Organic (or Inorganic) Chemistry. IUPAC is the English abbreviations of the
International Union of Pure and Applied Chemistry.
Note 2. CAS registration number (also known as CAS number). a unified digital identification
designated by the Chemical Abstracts Service under the American Chemical Society.
f) The content of a substance/ substance group shall be expressed in accordance
with the International System of Units (SI).
5 Data Format and Data Exchange
5.1 General rules
The data of material declaration for packaging shall specifies its specific exchange
formats, exchange modes and exchange requirements.
5.2 Data format
The data of material declaration for packaging shall be defined with the XML language
and the W3C1) XML model, in order to meet the specifications of GB/T 18793. The XML
model defines the data elements (data types and limits) and structures (data
relationship) of a material declaration data file.
The framework of data declaration established by this Standard includes compulsory
data fields (required) and selective data fields (optional). The optional data fields can
be increased as required by the requesters. See Annex B for the example of material
declaration for packaging.
5.3 Data exchange
The modes and requirements of data exchange include.
1) W3C of the World Wide Web Consortium is a suitable example of products sold on the market.
mode)
Expected completion
date Optional
Propose expected completion
date of declaration
Actual completion date Required Declaration completion date
Field lock Optional
A sign defined by declaration
requester and used to lock and
not allow declaration supplier to
change information
Accessory Optional Accessory attached to declaration
Product information
(optional for the type in
material declaration for
packaging)
Product name Required Name of subject products of packaging
Unique identifier Required Corresponding unique identifier of products
Manufacturing place Optional Product manufacturing place
Mass Optional Total mass of products
Measure unit Optional Measure unit of mass of products
Annotation Optional Annotation field for any additional information
Packaging information
(included in each
material declaration of
packaging)
Name of packaging Required Name of packaging supplied by person making declaration
Material of packaging Optional
Type of material of packaging
supplied by person making
declaration
Unique identifier Required
Corresponding unique identifier
of packaging, e.g. number of
packaging manufacturer plus
product code
Version Optional Version of packaging
Packaging grade Required Grade of packaging based on applications of packaging
Mass Required Mass of packaging
Measure unit Required Measure unit of mass of packaging
Mass percentage Optional Mass percentage of packaging in whole products
Unit quantity Required
Quantity of the same packaging
(when packaging includes
multiple packagings of the same
type, it is allowed to...