Skip to product information
1 of 8

PayPal, credit cards. Download editable-PDF and invoice in 1 second!

GB/T 2983-2008 English PDF (GBT2983-2008)

GB/T 2983-2008 English PDF (GBT2983-2008)

Regular price $160.00 USD
Regular price Sale price $160.00 USD
Sale Sold out
Shipping calculated at checkout.
Quotation: 24-hr self-service. Click GB/T 2983-2008
See Chinese contents: GB/T 2983-2008

GB/T 2983-2008: Series of motorcycle tyres

This Standard specifies the terms and definitions, classification, designation method of specifications mark and its additional marks, specifications, dimensions, pneumatic pressures, and loads and rims of motorcycle tyres. This Standard is applicable to the new pneumatic motorcycle tyres.
GB/T 2983-2008
ICS 83.160.10
G 41
NATIONAL STANDARD
OF THE PEOPLE REPUBLIC OF CHINA
Replacing GB/T 2983-1997
Series of Motorcycle Tyres
(ISO 4249-1.1985, Motorcycle Tyres and Rims (Code-designated Series) - Part 1.Tyre; ISO 4249-2.1990, Motorcycle Tyres and Rims (Code-designated Series) - Part 2. Tyre Load Ratings; ISO 4249-3.2004, Motorcycle Tyres and Rims (Code-designated series) - Part 3. Rims; ISO 5751-1.2004, Motorcycle Tyres and Rims (Metric Series) - Part 1. Design Guides; ISO 5751-2.2004, Motorcycle Tyres and Rims (Metric Series) - Part 2. Tyre Dimensions and Load-carrying Capacities, ISO 5751-3.2004, Motorcycle Tyres and Rims (Metric Series) - Part 3. Range of Permitted rim contours; ISO 5995-1.1982, Moped Tyres and Rims - Part 1. Tyres; ISO 6054-1.1994, Motorcycle Tyres and Rims (Code-designated Series) - Diameter Codes 4 to 12 - Part 1.Tyres, NEQ)
ISSUED ON. JUNE 18, 2008
IMPLEMENTED ON. FEBRUARY 1, 2009
Issued by. The General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China;
Standardization Administration of the People's Republic of China
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative References ... 5
3 Terms and Definitions ... 5
4 Classification ... 5
5 Designation Method of Specifications Mark and Its Additional Marks ... 6 6 Specifications, Dimensions, Pneumatic Pressures, Loads and Rims ... 7 Appendix A (Informative) Tread Types of Motorcycle Tyres of Metric Series ... 26 Appendix B (Normative) Features of Tyre Service Conditions ... 27
Foreword
The consistent degree of this Standard to the following standards is "not equivalent". ISO 4249-1.1985, "Motorcycle Tyres and Rims (Code-designated Series) - Part 1.Tyre"; ISO 4249-2.1990, "Motorcycle Tyres and Rims (Code-designated Series) - Part 2. Tyre Load Ratings"; ISO 4249-3.2004, "Motorcycle Tyres and Rims (Code-designated series) - Part 3. Rims"; ISO 5751-1.2004, "Motorcycle Tyres and Rims (Metric Series) - Part 1. Design Guides"; ISO 5751-2.2004, "Motorcycle Tyres and Rims (Metric Series) - Part 2. Tyre Dimensions and Load-carrying Capacities", ISO 5751-3.2004, "Motorcycle Tyres and Rims (Metric Series) - Part 3. Range of Permitted rim contours"; ISO 5995-1.1982, "Moped Tyres and Rims - Part 1. Tyres"; ISO 6054-1.1994,"Motorcycle Tyres and Rims (Code-designated Series) - Diameter Codes 4 to 12 - Part 1.Tyres", JIS D4203-1998, "Motorcycle Tyres - Designation and Dimensions", and ETR-TOEDI-2006, "The European Tyre and Rim Technical Organisation - Engineering Design Information".
This Standard replaces GB/T 2983-1997, "Series of Motorcycle Tyres"
The main differences between this Standard and GB/T 2983-1997 are.
?€??€?The explanations for ply ratings, speed symbols and load indexes are added in the example for the specifications marking of motorcycle tyres in the code-designated series (3.1.1 of 1997 edition and 5.1 of this edition);
?€??€?Specifications for some of the reinforced and weighted motorcycle tyres in the code-designated series as well as those for low sections 4.10 and 4.60 are added (Tables 1 and 10 of 1997 edition and Tables 1 and 2 of this edition);
?€??€?The small-wheel-diameter series in the former standard has been included into the code-designated series (Table 10 of 1997 edition and Table 2 of this edition); ?€??€?The designation method for specifications of tyres of metric series in difference structures (bias-ply tyres, bias-belted tyres and radial tyres) and with different speeds are added (3.2.1 of 1997 edition and 5.2 of this edition);
?€??€?Some of the permitted rims specified in the requirements of permitted rim contours for motorcycle tyres in code-designated series are modified (Table 2 of 1997 edition and Table 3 of this edition);
?€??€?The specifications of metric tyres of the 100, 90, 80, 70, 60, 55 and 50 series are supplemented with those for the motorcycle tyres of 65 and 40 series with the nominal rim diameter being greater than or equal to 13 and for the motorcycle tyres of 70 and 60 series with such diameter being less than or equal to 12 (Tables 3 and 4 of 1997 edition and Tables 5, 6 and 7 of this edition);
?€??€?The maximum overall width of section in service of bias belted tyres and radial tyres are added (Table 3 of 1997 edition and Tables 5 and 6 of this edition); ?€??€?The explanations that ?€?the bracketed rims in the tables of permitted rim contours are applicable only to the motorcycle tyres with bias-ply and bias-belted structures?€? are added, and some of the permitted rims are modified (Table 5 of 1997 edition and Table 8 of this edition);
?€??€?The inflation pressures, load indexes and corresponding load capacity values for high-speed tyres specified in the table of specifications and dimensions of the former standard are deleted, and table of inflation pressures corresponding to different speeds of tyres under their maximum loads is added (Table 3 of 1997 edition and Table 9 of this edition); ?€??€?The calculation method for tolerance of tyre dimensions is modified (4.5 of 1997 edition and Tables 1, 2, 5, 6, 7, 10 and 11 of this edition);
?€??€?The speed symbols V and W are added into the table of speed symbols
corresponding to the maximum speeds; and the requirements for the load capacity variations of motorcycle tyres with the rim diameter ??? 12 and the speed symbol of K or L and those for such variations of motorcycle tyres with the speed ??? 210km/h are added into the table of load capacity variance ratio under different speeds; (Appendix A of 1997 edition and Appendix B of this edition).
Appendix A of this Standard is informative, and Appendix B is normative. This Standard is proposed by China Petroleum and Chemical Industry Association. This Standard is under the jurisdiction of National Technical Committee 19 on Tyres and Rims of Standardization Administration of China.
The Subcommittee on Motorcycle and Bike Tyre and Rim of Standardization Administration of China is entrusted with the explanation of this Standard. Drafting organizations of this Standard. Diamond Tire Factory of Guangzhou Guangxiang Enterprises Group Co., Ltd., Xiamen Zhengxin Rubber Industry Co., Ltd., Tianjin Wanda Tyre Group Co., Ltd., Dongguan Huacheng Tyre Factory.
Chief drafting staff of this Standard. Chen Qiufa, Xiao Chuhua, Lei Ling, Wang Chuanmin, Huang Linzhou.
The previous editions of the standard replaced by this Standard are.
?€??€?GB 2983-1982, GB 2983-1991 and GB/T 2983-1997.
Series of Motorcycle Tyres
1 Scope
This Standard specifies the terms and definitions, classification, designation method of specifications mark and its additional marks, specifications, dimensions, pneumatic pressures, and loads and rims of motorcycle tyres.
This Standard is applicable to the new pneumatic motorcycle tyres.
2 Normative References
The following documents contain provisions which, through reference in this Standard, constitute provisions of this Standard. For dated reference, subsequent amendments to (excluding corrections to), or revisions of, any of these publications do not apply. However, all parties coming to agreements based on this Standard are encouraged to investigate the possibility of applying the most recent editions of these standards. For undated references, the latest editions of the normative documents referred to apply.
GB/T 6326 "Tyre Terms and Definitions" (GB/T 6326-2005, ISO 4223-1.2002, Definitions of Some Terms Used in Tyre Industry - Part 1.Pneumatic Tyres, NEQ) GB/T 13202 "Series of Motorcycle Rims" (GB/T 13202-2007, ISO 4249-3.2004, Motorcycle Tyres and Rims (Code-designated Series) - Part 3. Rims, ISO 5995-2.1988, Moped Tyres and Rims - Part 2. Rims, ISO 6054-2.1990, Motorcycle Tyres and Rims (Code-designated Series) - Diameter Codes 4 to 12 - Part 2. Rims, MOD)
3 Terms and Definitions
For the purposes of this Standard, the terms and definitions established in GB/T 6326 apply.
4 Classification
4.1 Motorcycle tyres of code-designated series
Tyres in this series are applicable to the rims with the nominal diameter being 4 to 21. As for the tyres with the nominal rim diameter larger than or equal to 14, the cylindrical WM rims or 5?? tapered MT rims shall be adopted.
As for the tyres with nominal rim diameter less than or equal to 12, the divided DT rims, drop center DC rims or 5?? tapered MT rims shall be adopted, with the maximum travel speed being 100 km/h; such tyres should not be used for non-highway tasks, such as transporting etc.
4.2 Motorcycle tyres of metric series
3-10
3-12
2.15MT 84
Note. The maximum dimensions in service in this table are reference data for service. a If the design section width of tyre is less than 100mm, the tolerance of section width is ??4mm; If the design section width of tyre is 100mm or above, the tolerance of section width is ?? 4%; b The maximum overall diameter of tyre = 2 ?? designed section height ?? 1.06 + nominal rim diameter; The minimum overall diameter of tyre = 2 ?? designed section height ?? 0.94 + nominal rim diameter; See Table 14 for nominal rim diameters and Table 15 for designed section heights. B.2 Speed symbol
See Table B.2 for the corresponding relation...

View full details