GB/T 2941-2006: Rubber -- General procedures for preparing and conditioning test pieces for physical test methods

Delivery: 9 seconds. Download (and Email) true-PDF + Invoice.
Get Quotation: Click GB/T 2941-2006 (Self-service in 1-minute)
Newer / historical versions: GB/T 2941-2006

Preview True-PDF

Scope

This Standard specifies general procedures for the preparation, measurement,
marking, storage and conditioning of rubber test pieces for use in physical tests
specified in other Standards, and the preferred conditions to be used during the tests.
Special conditions applicable to a particular test or material or simulating a particular
climatic environment are not included, nor are special requirements for testing whole
products.
This Standard also specifies the requirements for the time-interval to be observed
between forming and testing of rubber test pieces and products. Such requirements
are necessary to obtain reproducible test results and to minimize disagreements
between customer and supplier.

Basic Data

Standard ID	GB/T 2941-2006 (GB/T2941-2006)
Description (Translated English)	Rubber -- General procedures for preparing and conditioning test pieces for physical test methods
Sector / Industry	National Standard (Recommended)
Classification of Chinese Standard	G40
Classification of International Standard	83.060
Word Count Estimation	17,151
Date of Issue	2006-09-01
Date of Implementation	2007-02-01
Older Standard (superseded by this standard)	GB/T 2941-1991; GB/T 5723-1993; GB/T 9865.1-1996; GB/T 9868-1988
Adopted Standard	ISO 23529-2004, IDT
Regulation (derived from)	National Standard Approval Announcement 2006 No.11 (Total No.98)
Issuing agency(ies)	General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary	This standard specifies the physical preparation for other standard rubber test specimen, measurement, markers, storage and regulation of the general program, as well as the preferred conditions for the testing process. Does not include specific conditions for specific tests or materials or simulate special climate and environment, nor does it include the special requirements for product testing. This standard also provides a rubber samples and products made ??from the time interval required for the test. These requirements increase the reproducibility of test results and reduce disputes between consumers and suppliers is necessary.