GB/T 28679-2012 English PDF (GBT28679-2012)

Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click GB/T 28679-2012
Historical versions: GB/T 28679-2012
Preview True-PDF (Reload/Scroll if blank)

GB/T 28679-2012: Remanufacturing of automotive components -- Assembly
GB/T 28679-2012
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 43.020
T 40
Remanufacturing of Automotive Components -
Assembly
ISSUED ON: SEPTEMBER 3, 2012
IMPLEMENTED ON: JANUARY 1, 2013
Issued by: General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword ... 3 
1 Scope ... 4 
2 Normative References ... 4 
3 Terms and Definitions ... 4 
4 Basic Requirements for Assembly ... 4 
Foreword
This Standard was drafted in accordance with the rules in GB/T 1.1-2009.
This Standard was proposed by Ministry of Industry and Information Technology of the
People’s Republic of China.
This Standard shall be under the jurisdiction of National Technical Committee 114 on
Road Vehicles of Standardization Administration of China (SAC/TC 114).
The drafting organizations of this Standard: Dongfeng Motor Corporation; SINOTRUK
Jinan Fuqiang Power Co., Ltd.; Guangzhou Huadu Worldwide Transmission Co., Ltd.;
China Automotive Technology and Research Center Co., Ltd.; China Association of
Automobile Manufacturers; Technical Center of China FAW Group Corporation; Great
Wall Motor Co., Ltd.; Weichai Power (Weifang) Remanufacturing Co., Ltd.; Shanghai
Automotive Industry Corporation (Group); Yuchai Remanufacturing Industry (Suzhou)
Co., Ltd.
The main drafters of this Standard: Hu Tao, Ma Mingchang, Wang Deqian, Zhou
Zhengbing, Liu Yanrong, Yan Yiping, Yang Yimin, Yang Jie, Zhang Guorong, Yao
Honghua, Chen Qi.
Remanufacturing of Automotive Components -
Assembly
1 Scope
This Standard specifies the terms and definitions of remanufacturing of automotive
components - assembly, as well as the basic requirements for assembly, etc.
This Standard is applicable to the assembly of the remanufacturing of automotive
components. The assembly of the remanufacturing of other motor vehicle parts may
take this as a reference.
2 Normative References
The following documents are indispensable to the application of this document. In
terms of references with a specified date, only versions with a specified date are
applicable to this document. In terms of references without a specified date, the latest
version (including all the modifications) is applicable to this document.
GB/T 26989 Automobile Recovery - Terminology
3 Terms and Definitions
The terms and definitions defined in GB/T 26989 are applicable to this Standard.
4 Basic Requirements for Assembly
4.1 The assembly environment of the parts shall comply with the stipulations of
corresponding processes.
4.2 Before assembly, the parts shall be cleaned or rinsed.
4.3 The parts to be installed on the site of assembly must be qualified products.
4.4 During assembly, the remanufactured parts shall have assembly records, and the
record retention period shall not be less than the record period of new products.
4.5 When new parts and components must be adopted, it shall strictly follow the
relevant stipulations.
4.6 The assembly shall be carried out in accordance with the specified process
requirements.