GB/T 28620-2012 English PDF (GBT28620-2012)

Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click GB/T 28620-2012
Historical versions: GB/T 28620-2012
Preview True-PDF (Reload/Scroll if blank)

GB/T 28620-2012: The calculating methods of remanufacturing rate
GB/T 28620-2012
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 25.010
J 01
The calculating methods of remanufacturing rate
ISSUED ON: JUNE 29, 2012
IMPLEMENTED ON: DECEMBER 01, 2012
Issued by: General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Terms and definitions ... 4
4 Calculating methods of remanufacturing rate ... 5
Foreword
This Standard is drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard was proposed and shall be under the jurisdiction of National Technical
Committee on Green Manufacturing Technology of Standardization Administration of
China (SAC/TC 337).
Drafting organizations of this Standard: Equipment Remanufacturing Technology Key
Laboratory of National Defense Science and Technology, Hefei University of
Technology, XCMG Engineering Machinery Co., Ltd., Sinotruk Group Jinan Fuqiang
Power Co., Ltd., China Machine Productivity Promotion Center, Foshan Shunde
District Quality Technology Supervision Institute of Standards and Coding, China
National Institute of Standardization, Shanghai Entry-Exit Inspection and Quarantine
Bureau of the People’s Republic of China.
Main drafters of this Standard: Xu Binshi, Liu Bohai, Zhang Wei, Shi Peijing, Xi
Daoyun, Yan Lijuan, Wu Jiawei, Zhang Xiufen, Luo Jianming, Huang Tie, Ouyang Dan,
Li Junsheng, Zhou Xinyuan, Wang Wenyu, Liu Yun, Wang Xiuteng, Wu Yiwen.
The calculating methods of remanufacturing rate
1 Scope
This Standard specifies the calculation methods of remanufacturing rate.
This Standard applies to products that are remanufactured in China.
2 Normative references
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
GB/T 28619-2012 Remanufacturing - Terminology
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
remanufacturing rate
The percentage of the sum of quantity, the sum of weight and the sum of value of
qualified remanufactured parts obtained after remanufacturing production and
processing of a unit of remanufactured blanks TO the total quantity, the total weight
and the total value of the corresponding products. They are called quantity
remanufacturing rate, quality remanufacturing rate and value remanufacturing rate,
respectively.
[GB/T 28619-2012, definition 2.29]
3.2
output remanufacturing rate
The ratio of the output of remanufactured products per unit time (such as month, year,
etc.) to the total output of all products (including non-remanufactured products)
produced by the manufacturer.
3.3