GB/T 27025-2008: General requirements for the competence of testing and calibration laboratories

Delivery: 9 seconds. Download (and Email) true-PDF + Invoice.
Get Quotation: Click GB/T 27025-2008 (Self-service in 1-minute)
Newer / historical versions: GB/T 27025-2008

Preview True-PDF

Scope

1.1 This standard specifies the general requirements for the laboratory's ability to perform tests and/or calibrations (including sampling capabilities). These tests and calibrations
Includes testing and calibration using standard methods, non-standard methods, and laboratory-developed methods.
1.2 This standard applies to all organizations engaged in testing and/or calibration, including such as first-party, second-party and third-party laboratories, and
Testing and/or calibration of laboratories as part of inspection and product certification.
This standard applies to all laboratories, regardless of the number of personnel or the scope of their testing and/or calibration activities. When the lab
When not engaged in one or more of the activities covered by this standard, such as sampling and design (development) of new methods, the relevant provisions of this standard may not be used
Requirements.
1.3 The notes in this standard are explanations, examples, and guidance on the text. They neither contain requirements nor form part of this standard.
1.4 This standard is used in laboratories to establish a management system for quality, administration and technical operations. Laboratory users, regulators and accreditation bodies
This standard can also be used to confirm or acknowledge the capabilities of laboratories. This standard is not intended as a basis for laboratory certification.
Note 1.The term "management system" in this standard refers to the quality, administrative and technical systems that control the operation of the laboratory.
Note 2.Certification of a management system is sometimes referred to as registration.
1.5 This standard does not include regulatory and safety requirements that should be met during laboratory operations.
1.6 If the testing and calibration laboratory complies with the requirements of this standard, its quality management system for testing and calibration activities will also be fully satisfied.
Meets the principles of GB/T 19001.Appendix A provides a comparison between the provisions of this standard and GB/T 19001.This standard contains
Technical capability requirements not included in GB/T 19001.
Note 1.To ensure consistency of application, it may be necessary to explain or explain some requirements of this standard. Appendix B gives detailed information
The guidelines are especially applicable to accreditation bodies (see GB/T 2701).
Note 2.If the laboratory wants some or all of its testing and calibration activities to be accredited, it should choose an accreditation body operating in accordance with GB/T 2701.

Basic Data

Standard ID	GB/T 27025-2008 (GB/T27025-2008)
Description (Translated English)	General requirements for the competence of testing and calibration laboratories
Sector / Industry	National Standard (Recommended)
Classification of Chinese Standard	A00
Classification of International Standard	03.120.20
Word Count Estimation	25,284
Date of Issue	2008-05-08
Date of Implementation	2008-08-01
Older Standard (superseded by this standard)	GB/T 15481-2000
Quoted Standard	GB/T 27000
Adopted Standard	ISOIEC 17025-2005, IDT
Regulation (derived from)	Announcement of Newly Approved National Standards No. 7, 2008 (No. 120 overall)
Issuing agency(ies)	General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary	This standard specifies the laboratory for testing, and (or) the ability to calibrate the general requirements, including the application of these testing and calibration standard methods, non-standard methods, and laboratory developed methods of testing and calibration, This standard applies to all persons engaged in testing and (or) calibration organizations, including such as the first, second and third-party laboratories, and will detect and (or) calibration as part of inspection and product certification laboratories, this standard applies to all laboratories, regardless of the number or the number of its personnel to detect and (or) the size of the calibration range of activities, when the laboratory is not engaged in this standard include one or more activities, such as sampling and the design of new methods (developed) when not using the requirements of the relevant provisions of the standard, this standard is the body of the note, examples and guidance, they do not contain requirements, nor does it constitute the main part of this standard, the establishment of quality standards for laboratories, administrative and technical operations management system, laboratory users, regulatory authorities and accreditation bodies may also be used on the standard laboratory capacity to confirm or acknowledge, this standard is not intended to be used as the basis for laboratory accreditation, this standard does not include laboratory operations shall comply with the regulations and safety requirements, if testing and calibration laboratories comply with the requirements of this standard, and its testing and calibration activities for the operation of the quality management system will meet the GB/T 19001 principles, Appendix A provides the standards and GB/T 19001 terms of control, this standard contains GB/T 19001 does not contain the technical capability requirements.