GB/T 2092-1992 English PDF (GBT2092-1992)

Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click GB/T 2092-1992
Historical versions: GB/T 2092-1992
Preview True-PDF (Reload/Scroll if blank)

GB/T 2092-1992: Sebacic acid for industrial use
GB 2092-1992
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
GB 2092-92
Replacing GB 2092-80
Sebacic Acid for Industrial Use
工业葵二酸
APPROVED ON. JANUARY 14, 1992
IMPLEMENTED ON. DECEMBER 1, 1992
Approved by. State Bureau of Technical Supervision of the People’s
Republic of China
Table of Contents
1 Subject Content and Application Scope ... 3 
2 Normative References ... 3 
3 Technical Requirements ... 3 
4 Test Methods ... 4 
5 Inspection Rules ... 7 
6 Packaging, Marking, Storage and Transportation ... 8 
Additional Information... 9 
Sebacic Acid for Industrial Use
1 Subject Content and Application Scope
This Standard specifies the technical requirements, test methods, inspection rules as
well as marking, packaging, transportation and storage of sebacic acid for industrial
use.
This Standard applies to sebacic acid produced by cracking of ricinoleic acid. This
product is mainly used for the production of dioctyl sebacate and nylon 1 010.
Molecular formula. C10H18O4
Relative molecular mass. 202.25 (in accordance with the International Relative Atomic
Mass 1987)
2 Normative References
GB 601 Chemical Reagents – Preparation of Standard Solutions for Titrimetric
Analysis (Titrimetric Analysis)
GB 603 Chemical Reagents – Preparation of Preparations and Products for Test
Methods
GB 2384 Dyes Intermediates – General Method for the Determination of Melting
Range
GB 3143 Colour Determination Method of Liquid Chemicals (Hazen Unit;
Platinum-Cobalt Scale)
GB 6284 Chemical Products for Industrial Use – General Method for
Determination of Water Content – the Loss of Mass on Drying Method
GB 6679 General Rules for Sampling Solid Chemical Products
GB 7531 Determination of Ash for Organic Chemical Products
3 Technical Requirements
3.1 Appearance. white crystal or powder; the qualified product with a slight color is
allowed.
3.2 The quality of sebacic acid for industrial use shall meet the requirements of the
In the formula.
X — the mass percentage content of sebacic acid, %;
c — the actual concentration of sodium hydroxide standard titration solution, mol/L;
V — the volume of sodium hydroxide standard titration solution for titration, Ml;
0.1011 — the mass of sebacic acid in g equivalent to 1.00 mL of sodium hydroxide
standard titration solution [c(NaOH) = 1.000 mol/L]; and
M — the mass of sample, g.
4.1.4 Tolerances
The difference between the results of two samples determined in parallel shall not be
more than 0.2%. Take the arithmetic mean of the results of the two determinations as
the result of determination.
4.2 Determination of ash content
Determine in accordance with GB 7531. Weight about 5 g of the sample (accurate to
0.01 g); and ignite it at the temperature 750 ± 25°C.
4.3 Determination of moisture content
4.4 Determination of alkali soluble chromaticity
4.4.1 Instrumentation
It shall meet the specifications of GB 3143.
4.4.2 Reagents and solutions
4.4.2.1 The reagents and solutions specified in GB 3143.
4.4.2.2 Potassium hydroxide solution. 100 g/L.
4.4.3 Analysis procedure
Weigh 3 g of the sample (accurate to 0.1 g); place into a 50 mL colorimetric tube; add
potassium hydroxide solution (4.4.2.2) to the mark; shake the colorimetric tube; after
the sample is completely dissolved, compare the colour with a standard chromatic
scale in a well-lighted place.
4.4.4 Tolerances
reserved sample for three months.
5.5 In case that one items of the inspection results fails to meet the requirements of
this Standard, a sample shall be taken from the package of a double amount for re-
inspection. Even if only one of the results obtained does not meet the requirements of
this Standard, the entire batch of products are non-conforming products.
5.6 When the seller and the buyer are in dispute with regard to the product quality,
an arbitration organization can be selected by both parties through consultation who
will conduct inspection in accordance with this Standard.
6 Packaging, Marking, Storage and Transportation
6.1 Sebacic acid shall be packaged in gunny bags or woven bags lined with plastic
bags, net weight 25 kg per bag.
6.2 The packaging bags shall be provided with visible marking, indicating
manufacturer name, product name, trade mark, type, manufacturing date, batch
number, grade and net weight.
6.3 Each batch of product shall be accompanied by the certificate of conformity,
indicating manufacturer name, product name, batch number, grade and net weight.
6.4 During storage and handling, do not mix with acids, alkalis or contact with
oxidative, corrosive substances, in order to prevent the damage of packaging or the
deterioration of product.
6.5 Sebacic acid shall be stored in a cool, well-ventilated warehouse or freight shed,
which shall be guarded against fire or damp.