Skip to product information
1 of 4

PayPal, credit cards. Download editable-PDF and invoice in 1 second!

GB/T 19138-2003 English PDF (GBT19138-2003)

GB/T 19138-2003 English PDF (GBT19138-2003)

Regular price $70.00 USD
Regular price Sale price $70.00 USD
Sale Sold out
Shipping calculated at checkout.
Quotation: In 1-minute, 24-hr self-service. Click here GB/T 19138-2003 to get it for Purchase Approval, Bank TT...

GB/T 19138-2003: Testing method of material insoluble in acetone for pesticides

This Standard specifies the determination of acetone material insoluble in pesticide original drug products. Method summary -- An appropriate amount of sample is dissolved with acetone. The insoluble is filtered hot and dried. Acetone insoluble content is calculated as the mass fraction of solid insoluble.
GB/T 19138-2003
GB
NATIONAL STANDARD OF THE
PEOPLE REPUBLIC OF CHINA
ICS 65.100.01
G 23
Testing method of in acetone
material insoluble for pesticides
ISSUED ON. MAY 20, 2003
IMPLEMENTED ON. NOVEMBER 1, 2003
Issued by. General Administration of Quality Supervision, Inspection and Quarantine
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Inspection method ... 4
Foreword
This Standard is revised based on International Pesticide Analysis
Collaborative Committee CIPAC MT 27 "Acetone insoluble matter
measurement method".
Main differences between this Standard and CIPAC MT 27 are as follows.
- conical flask and reflux condenser are directly matched without glass interface, simplifying equipment;
- heat reflux is specified for 5 min to avoid decomposition of certain
pesticides for long heating time and to avoid errors caused by naked eye observations;
- the specification of the sintered glass hoppers is unified with the domestic model G;
- added the drying of the glass crucible funnel before filtration. It is required to dry it in an oven at 110??C for 1 h to reach a constant weight.
This Standard was proposed by former National Petroleum and Chemical
Industry Bureau.
This Standard shall be under the jurisdiction of National Technical Committee on Pesticides of Standardization Administration of China (CSBTS/TC 133). The drafting organization of this Standard. Department of Applied Chemistry, China Agricultural University.
Main drafters of this Standard. Li Nan, Pan Canping, Nan Ruiran, Qian
Chuanfan.
This Standard was issued for the first time.
Testing method of in acetone
material insoluble for pesticides
1 Scope
This Standard specifies the determination of acetone material insoluble in pesticide original drug products.
2 Inspection method
2.1 Method summary
An appropriate amount of sample is dissolved with acetone. The insoluble is filtered hot and dried. Acetone insoluble content is calculated as the mass fraction of solid insoluble.
2.2 Reagents
Acetone. analytically pure.
2.3 Instruments
2.3.1 Standard stoppered conical flask. 250mL;
2.3.2 Reflux condenser;
2.3.3 Glass sand heart funnel type G3;
2.3.4 Tapered suction bottle. 500mL;
2.3.5 Oven;
2.3.6 Glass dryer;
2.3.7 Water bath.
2.4 Steps
Dry the glass sand heart hopper (110??C for about 1h) to constant weight (to the nearest of 0.0002g). Put it into the dryer and cool it for use. Weigh 10g of sample (to the nearest of 0.0002g). Place in Erlenmeyer flask. Add 150mL of acetone and shake to try to dissolve the sample. Then install a reflux condenser and heat it to boiling in a hot water bath. Stop heating after 5 min from boiling. Equip

View full details