GB/T 17200-2008: Technical specification for tensile, compression and flexural testing machines for rubber and plastics (constant rate of traverse)

Delivery: 9 seconds. Download (and Email) true-PDF + Invoice.
Get Quotation: Click GB/T 17200-2008 (Self-service in 1-minute)
Newer / historical versions: GB/T 17200-2008

Preview True-PDF

Scope

When a test machine has been verified in accordance with this Standard, the verifying
authority shall issue a certificate stating the following.
a) the identity of the machine and the date of verification;
b) the range certified and the class of each force or extension scale;
c) the method of verification used and the identity of any calibration devices employed;
d) the ambient temperature at the time of verification;
e) the accuracy of the rate setting;
f) the number of this Standard, i.e. GB/T 17200-2008 / ISO 5893.2002.
The test machine shall be re-verified periodically to ensure that it continues to meet the
class(es) designated from this Standard. The frequency of re-verification depends on the
type of machine, the standard of maintenance, and the amount of usage. Normally, it is
recommended that re-verification be carried out at intervals not exceeding 12 months.
However, a machine shall be re-verified if it is moved to a new location or if it is subjected
to major repairs or adjustments.

Basic Data

Standard ID	GB/T 17200-2008 (GB/T17200-2008)
Description (Translated English)	Technical specification for tensile, compression and flexural testing machines for rubber and plastics (constant rate of traverse)
Sector / Industry	National Standard (Recommended)
Classification of Chinese Standard	N72
Classification of International Standard	19.060; 83.200
Word Count Estimation	8,821
Date of Issue	2008-06-20
Date of Implementation	2009-01-01
Older Standard (superseded by this standard)	GB/T 17200-1997
Quoted Standard	GB/T 16825.1-2008
Adopted Standard	ISO 5893-2002, IDT
Regulation (derived from)	Announcement of Newly Approved National Standards No. 11 of 2008 (No. 124 overall)
Issuing agency(ies)	General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary	This standard specifies the drive at a constant speed of work for rubber, plastics and adhesive material test tensile test system technical requirements. This standard also applies to bending, shear and compression test system. Either a test system is only applicable to a limited range of materials.