GB/T 16716.5-2010 English PDF (GBT16716.5-2010)

Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click GB/T 16716.5-2010
Historical versions: GB/T 16716.5-2010
Preview True-PDF (Reload/Scroll if blank)

GB/T 16716.5-2010: Packaging and packaging waste -- Part 5: Recoverable by material recycling
GB/T 16716.5-2010
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 55.020
A 80
Packaging and Packaging Waste – Part 5: Recoverable by
Material Recycling
ISSUED ON: AUGUST 09, 2010
IMPLEMENTED ON: JANUARY 01, 2011
Issued by: General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of the People’s Republic of China.
Replaced
[Translator note: replaced by GB/T 16716.4-2018]
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative References ... 5
3 Terms and Definitions ... 5
4 Requirements ... 7
Annex A (Normative) Criteria for Recycling of Packaging Materials ... 8
Annex B (Normative) Criteria for Assessing Recyclability ... 10
Annex C (Informative) Examples of Compliance Summary Statement for Packaging to
be Recovered by Material Recycling after Use ... 14
Annex D (Informative) Examples of Declaration of the Percentage of Weight of
Material Available for Recycling ... 17
Foreword
GB/T 16716 Packaging and Packaging Waste can be divided into 7 parts:
--- Part 1: General Rules of Disposal and Utilization;
--- Part 2: Means and Program for Evaluation;
--- Part 3: Prevention by Source Reduction;
--- Part 4: Reuse;
--- Part 5: Recoverable by Material Recycling;
--- Part 6: Recoverable by Energy Recovery;
--- Part 7: Recoverable by Composting and Biodegradation.
This Part is Part 5 of GB/T 16716.
The technical content of this Part is equivalent to EN 13430-2004 Packaging – Requirements
for Packaging Recoverable by Material Recycling (English Version).
For ease of use, this Part has made the following editorial modifications:
a) Change the word "this European Standard" into "this Part";
b) Delete the Table of Contents, Foreword, Introduction and Annex ZA of the European
Standard;
c) Replace the comma "," as a decimal point by a decimal point ".";
d) Replace "Clauses and annexes of 94/62/EC" by "Clauses of GB/T 16716.1";
e) Replace "EN 13427" by "GB/T 16716.2";
f) Replace "CR 14311" by "GB/T 18455";
g) Replace "EN 13193" by "GB/T 23156".
The Annexes A and B of this Part are normative; while the Annex C and D are informative.
This Part was proposed by and under the jurisdiction of National Technical Committee on
Packaging of Standardization Administration of China.
Drafting organization of this Part: China National Export Commodities Packaging Research
Institute.
Packaging and Packaging Waste – Part 5: Recoverable by
Material Recycling
1 Scope
This Part of GB/T 16716 specifies the requirements, methods, procedures and criteria for
evaluating the recyclability of packaging or packaging materials.
This Part applies to packaging or packaging materials that can be recycled in the form of
material recycling.
2 Normative References
The provisions in following documents become the provisions of this Part of GB/T 16716
through reference in this Part. For dated references, the subsequent amendments (excluding
corrigendum) or revisions do not apply to this Part, however, parties who reach an agreement
based on this Standard are encouraged to study if the latest versions of these documents are
applicable. For undated references, the latest edition of the referenced document applies.
GB/T 16716.1-2008 Packaging and Packaging Waste - Part 1: General Rules of Disposal
and Utilization
GB/T 16716.2-2010 Packaging and Packaging Waste - Part 2: Means and Program for
Evaluation
GB/T 18455 Package Recycling Marking
GB/T 23156 Packaging - Packaging and The Environment - Terminology
CEN CR 13688-2000 Packaging – Material Recycling – Report on Requirements for
Substances and Materials to Prevent a Sustained Impediment to Recycling
EN 13437-2003 Packaging and Material Recycling – Criteria for Recycling Methods –
Description of Recycling Processes and Flow Chart
3 Terms and Definitions
For the purposes of this Part of GB/T 16716, the terms and definitions given in GB/T 23156,
GB/T 16716.2 and EN 13437 and the following apply.
3.1 Empty packaging