GB/T 16545-2015: Corrosion of metals and alloys -- Removal of corrosion products from corrosion test specimens

Delivery: 9 seconds. Download (and Email) true-PDF + Invoice.
Get Quotation: Click GB/T 16545-2015 (Self-service in 1-minute)
Newer / historical versions: GB/T 16545-2015

Preview True-PDF

Scope

1.1 This Standard specifies procedures for the removal of corrosion products
formed on metal and alloy corrosion test specimens during their exposure in
corrosive environments.
NOTE For the purpose of this Standard, the term “metals” refers to pure metals and alloys.
1.2 The specified procedures are designed to remove all corrosion products
without significant removal of base metal. This allows an accurate
determination of the mass loss of the metal, which occurred during exposure to
the corrosive environment.
1.3 This Standard may, in some cases, also be applied to metal coatings.
However, possible effects from the substrate must be considered.

Basic Data

Standard ID	GB/T 16545-2015 (GB/T16545-2015)
Description (Translated English)	Corrosion of metals and alloys -- Removal of corrosion products from corrosion test specimens
Sector / Industry	National Standard (Recommended)
Classification of Chinese Standard	H25
Classification of International Standard	77.060
Word Count Estimation	11,149
Date of Issue	2015-09-11
Date of Implementation	2016-06-01
Older Standard (superseded by this standard)	GB/T 16545-1996
Adopted Standard	ISO 8407-2007, IDT
Regulation (derived from)	National Standard Announcement 2015 No.25
Issuing agency(ies)	General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary	This Standard specifies the method for clearing in corrosive environments formed on the metal and alloy corrosion specimens corrosion products. By the method specified in this standard, it can remove all corrosion products, while not substantially damage the metal substrate can be accurately measured mass loss of metal produced in corrosive environments. This Standard applies to metals and alloys, and in some cases also apply to metal coating, but should consider the possible impact on the substrate produced.