Skip to product information
1 of 12

PayPal, credit cards. Download editable-PDF & invoice In 1 second!

GB 50387-2006 English PDF (GB50387-2006)

GB 50387-2006 English PDF (GB50387-2006)

Regular price $85.00 USD
Regular price Sale price $85.00 USD
Sale Sold out
Shipping calculated at checkout.
Quotation: 24-hr self-service. Click GB 50387-2006
See Chinese contents: GB 50387-2006

GB 50387-2006: Code for installation acceptance of metal mechanical hydromatic, lubricating and air-driven system equipment

This code is applicable to the installation quality acceptance of hydromatic equipment, oil lubricating equipment, grease lubricating equipment, oil fog lubricating equipment, sliding bearing static-pressure oil supply equipment, technological lubricating equipment and air-driven system equipment among the metallurgical machinery.
GB 50387-2006
GB
UDC
NATIONAL STANDARD OF THE
PEOPLE REPUBLIC OF CHINA
P GB 50387-2006
Code for installation acceptance of metal mechanical
hydromatic, lubricating and air-driven system equipment
ISSUED ON. SEPTEMBER 6, 2006
IMPLEMENTED ON. APRIL 1, 2007
Issued by. Ministry of Construction of the People's Republic of China;
General Administration of Quality Supervision, Inspection
and Quarantine of the People's Republic of China.
National Standard of the People's Republic of China
Code for installation acceptance of metal mechanical
hydromatic, lubricating and air-driven system equipment
Main drafting organization.
China Metallurgical Construction Association
Approval organization.
The Ministry of Construction of the People's Republic of China
Implementation Date.
April 1, 2007
China Planning Press
2007 Beijing
Foreword
According to the relevant requirements of Document JIANBIAO [2005] No.124 issued by the Ministry of Construction - ?€?Notice on Printing and Distributing ?€?the Development and Revision Plan (the second batch) of National Engineering Construction Standards and Codes in 2005?€??€?, this code was formulated, in combination with the characteristics of metallurgical construction, by China First Metallurgical Construction Co., Ltd. jointly with the organizations concerned, under the organization of China Metallurgical Construction Association.
In the process of formulating this code, the code drafting group learnt the relevant current national laws, regulations and standards, conducted investigations and studies, summarized the experience in the construction quality acceptance of hydromatic, lubricating and air-driven system equipment in metal mechanical equipment installation engineering over the years, discussed and revised the provisions in the code repeatedly, solicited the opinions from related organizations and experts, and finalized this code through review.
This code consists of eight chapters, covering General Provisions; Basic Requirements; Equipment Foundation, Anchor Bolt and Bearing Plate; Equipment and Materials in Site; Equipment Installation; Fabrication and Installation of Pipeline; Pipeline Flushing, Purging and Pressure Test; and Commissioning and Test-run, as well as six appendixes. The unit project in installation of hydromatic, lubricating and air-driven system equipment totally comprises seven sub-section projects and corresponding sub-item projects.
The provisions printed in bold type in this code are mandatory ones and must be implemented strictly.
This code is under the jurisdiction of, and its mandatory provisions are interpreted by the Ministry of Construction. China First Metallurgical Construction Co., Ltd. is in charge of the explanation of specific technical specifications
In order to improve the quality of this code, all relevant organizations are kindly invited to summarize and accumulate actual experiences when implementing this code. Relevant comments and recommendations, whenever necessary, should be fed back to China First Metallurgical Construction Co., Ltd. (Address. No.3, Gongye Avenue, Qingshan District, Wuhan City, 430081, China; E-mail. jisc@cfmcc.com or xiaolw@cfmcc.com) for amendment in future revision.
The chief drafting organization, co-drafting organization and chief drafters of this code are.
Chief Formulation Organization. China First Metallurgical Construction Co., Ltd.
Co-formulation Organization. Shanghai Baoye Group Construction Co., Ltd. Chief Drafters. Zhuo Guangyu, Xu Zuwen, Li Mingzhu, Wang Shiqing, Wu
Gangping, Liu Shiyin, Song Zhanjiang, Liu Zhiyuan, Liu Guangqiu, Luo Jin and Zou Yichang.
Table of Contents
1 General Provisions ... 7
2 Basic Requirements ... 8
3 Equipment Foundation, Anchor Bolt and Bearing Plate ... 12
3.1 General Requirements ... 12
3.2 Equipment Foundation ... 12
3.3 Anchor Bolt ... 12
3.4 Bearing Plate... 13
4 Equipment and Materials in Site ... 14
4.1 General Requirements ... 14
4.2 Equipment ... 14
4.3 Raw Materials ... 14
5 Installation of Equipment ... 15
5.1 General Requirements ... 15
5.2 Installation of Oil Tank ... 15
5.3 Installation of Cooler and Steam Heater ... 15
5.4 Installation of Filter ... 16
5.5 Installation of Energy Accumulator ... 16
5.6 Installation of Pump ... 16
5.7 Installation of Complete Set of Hydraulic (Lubrication) Station ... 17 5.8 Installation of Brackets for Hydraulic (Air) Valve and Control Valve ... 17 5.9 Installation of Oil Purifier ... 18
5.10 Installation of Oil Feeder and Distributor ... 18
5.11 Installation of Water-separating Gas Filter, Atomized (Oil Gas) Lubricator and Control Valve ... 18
6 Fabrication and Installation of Pipeline ... 19
6.1 General Requirements ... 19
6.2 Pipeline Welding ... 19
6.3 Pipeline Pickling ... 20
6.4 Pipeline Fabrication ... 20
6.5 Pipeline Installation ... 21
7 Pipeline Flushing, Purging and Pressure Test ... 24
7.1 General Requirements ... 24
7.2 Pipeline Flushing ... 24
7.3 Pipeline Purging ... 25
7.4 Pressure Test for Hydromatic and Lubricant Pipeline Systems ... 25 7.5 Pressure Test for Grease Pipeline System ... 25
7.6 Pressure Test for Air-driven Pipeline System ... 26
8.1 General Requirements ... 27
8.2 Commissioning and Test-run of Hydromatic Equipment ... 27
8.3 Commissioning and Test-run of Lubricant Equipment ... 28
8.4 Commissioning and Test-run of Grease Equipment ... 29
8.5 Commissioning and Test-run of Oil Fog Lubricating Equipment ... 29 8.6 Commissioning and Test-run of Technological Lubricating Equipment ... 30 8.7 Commissioning and Test-run of Air-driven System Equipment ... 31
Appendix A Quality Acceptance Records of Sub-item Projects in Installation of Metal Mechanical Hydromatic, Lubricating and Air-driven System Equipment ... 32 Appendix B Quality Acceptance Records of Sub-section Projects in Installation of Metal Mechanical Hydromatic, Lubricating and Air-driven System Equipment ... 33 Appendix C Quality Acceptance Records of Unit Projects in Installation of Metal Mechanical Hydromatic, Lubricating and Air-driven System Equipment ... 34 Appendix D Commissioning and Test-run Records for Metal Mechanical
Hydromatic, Lubricating and Air-driven System Equipment ... 37
Appendix E No-load Linkage Test-run Records for Metal Mechanical Hydromatic, Lubricating and Air-driven System Equipment ... 38
Appendix F Coding of hydramatic transmission, oil solid particle contamination level (Excerpted from National Standard GB/T 14039-2002) ...

View full details