GB 4208-2008: [GB/T 4208-2008] Degrees of protection provided by enclosure (IP code) [Renamed to GB/T 4208-2008]

Delivery: 9 seconds. Download (and Email) true-PDF + Invoice.
Get Quotation: Click GB 4208-2008 (Self-service in 1-minute)
Newer / historical versions: GB 4208-2008

Preview True-PDF

Basic Data

Standard ID	GB 4208-2008 (GB4208-2008)
Description (Translated English)	[GB/T 4208-2008] Degrees of protection provided by enclosure (IP code) [Renamed to GB/T 4208-2008]
Sector / Industry	National Standard
Classification of Chinese Standard	K09
Classification of International Standard	13.260
Word Count Estimation	34,367
Date of Issue	2008-03-25
Date of Implementation	2009-01-01
Older Standard (superseded by this standard)	GB 4208-1993
Quoted Standard	GB/T 311.2-2002; GB/T 2421-1999; IEC 60050-195-1998; IEC 60050-826-1982; IEC 60068-2-68-1994
Adopted Standard	IEC 60529-2001, IDT
Regulation (derived from)	Announcement of Newly Approved National Standards No. 5, 2008 (No. 118 overall)
Issuing agency(ies)	General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary	This Chinese standard applies to the rated voltage not exceeding 72. 05kV, electrical equipment enclosure with protective polarized. Various products referenced enclosure class degree and manner, and the type of housing, the decision left to product standards, the degree of protection against the specific test used shall comply with the requirements of this standard and, if necessary, increase in the relevant product standard supplement requirements. In the relevant product standard as specified details see Appendix B. For specific types of equipment, product standards can specify different requirements, but at least to ensure the same level of safety. This standard is only considered in all respects comply with the relevant product standard shell, under normal conditions of use, shell materials and processes should ensure to achieve the required level of protection. If certain types of test equipment to meet the general requirements and the choice of protection applied to the device type, this standard also applies to the type of equipment, empty shell. For mechanical damage, corrosion, corrosive solvents, mold, insect, solar radiation, freezing, humidity, explosive gases and other environmental conditions external influence or damage to the equipment of the shell and the shell of the protective measures and to prevent hazardous moving parts outside of the housing in contact by the relevant product standard. Not connected with the housing of the separator and set up specifically for the personal safety barrier is not considered part of the enclosure, this standard will not study.