GB 32031-2015 English PDF

GB 32031-2015: Minimum allowable values of energy efficiency and energy efficiency grades for waste submersible motor-pumps
Delivery: 9 seconds. Download (& Email) true-PDF + Invoice.
Get Quotation: Click GB 32031-2015 (Self-service in 1-minute)
Historical versions (Master-website): GB 32031-2015
Preview True-PDF (Reload/Scroll-down if blank)

GB 32031-2015
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 27.010
F 01
Minimum Allowable Values of Energy Efficiency
and Energy Efficiency Grades for Waste
Submersible Motor-Pumps
ISSUED ON. SEPTEMBER 18, 2015
IMPLEMENTED ON. OCTOBER 1, 2016
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of PRC.
Table of Contents
Forward ... 3 
1 Scope ... 4 
2 Normative References ... 4 
3. Terms and Definitions ... 4 
4 Basic Requirements ... 5 
5 Energy Efficiency Grades ... 5 
6 Minimum Allowable Values of Energy Efficiency ... 6 
7 Evaluating Values of Energy Conservation ... 6 
8 Test Methods ... 7 
9 Inspection Rules ... 7 
10 Labels of Energy Efficiency Grades ... 8 
Forward
The Chapter 6 in this Standard is mandatory, while the rest are recommended.
This standard was drafted as per the rules specified in GB/T 1.1-2009.
This standard was proposed by the Resource Conservation and Environmental
Protection Division of the National Development and Reform Commission, as well as
the Department of Energy Conservation and Resources Utilization of the Ministry of
Industry and Information Technology.
This standard shall be under the jurisdiction of National Technical Committee for
Standardization of Energy Fundamentals and Management (SAC/TC 20), and National
Technical Committee on Agricultural Machinery of Standardization (SAC/TC 201).
Drafting organizations of this Standard. Technical Research Center of Fluid Machinery
Engineering in Jiangsu University, Chinese Academy of Agricultural Mechanization
Sciences, Taizhou Taifeng Pump Industry Co., Ltd., Shimge Pump Group Industry Co.,
Ltd., Leo Group Co., Ltd., Hangzhou SRT Pump Co., Ltd., Zhejiang Dayuan Pumps
Industrial Co., Ltd., Shandong Celebrity Group Co., Ltd., Zhejiang Qifeng Pump
Industry Co., Ltd., Zhejiang Fengqiu Pump Industry Co., Ltd., Nanjing Lanshen Pump
Group Co., Ltd., Zhejiang Fengyuan Pump Industry Co., Ltd., Haicheng Suprasuny
Pump Co., Ltd., Shanxi Skysea Pump Industry Co., Ltd., Taizhou Jiadi Pump Industry
Co., Ltd., and Zhejiang Wenling Institute of Supervision and Testing on Product Quality.
Chief drafting staffs of this Standard. Wang Yang, Zhang Xiansheng, Mao Ji, Xu
Mintian, Wang Xiangrong, Zhao Liwei, Lu Qiurong, Wang Guoliang, Zhou Jianquan,
Jiang Ronghua, Lou Qifeng, Chen Bin, Sun Jianguo, Li Lulu, Shang Huaiyuan, Chen
Xianyuan, Jin Shibin, and Lang Tao.
Minimum Allowable Values of Energy
Efficiency and Energy Efficiency Grades for
Waste Submersible Motor-Pumps
1 Scope
This Standard specifies the energy efficiency grades, minimum allowable values of
energy efficiency, evaluating values of energy conservation, test methods, inspection
rules, and labels of energy efficiency grades for the waste submersible motor-pumps.
This Standard is applicable to the single-phase or three-phase waste submersible
motor-pumps (hereinafter referred to as “pump”) that deliver various sewage, or mixed
liquid containing sand, fiber materials, manure, river silt and other insoluble solid
substances.
2 Normative References
The following documents are essential to the application of this document. For the
dated documents, only the versions with the dates indicated are applicable to this
document; for the undated documents, only the latest version (including all the
amendments) are applicable to this standard.
GB/T 2828.1 Sampling Procedures for Inspection by Attributes - Part 1. Sampling
Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-Lot Inspection
GB/T 2829 Sampling Procedures and Tables for Periodic Inspection by Attributes
(Apply to Inspection of Process Stability)
GB/T 12785-2014 Test Methods for Submersible Motor-Pumps
GB/T 24674 Waste Submersible Motor-Pumps
3. Terms and Definitions
The following terms and definitions, and those defined in GB/T 24674 are applicable
to this document.
3.1 Minimum allowable values of energy efficiency for waste submersible
motor-pumps
GB 32031-2015
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 27.010
F 01
Minimum Allowable Values of Energy Efficiency
and Energy Efficiency Grades for Waste
Submersible Motor-Pumps
ISSUED ON. SEPTEMBER 18, 2015
IMPLEMENTED ON. OCTOBER 1, 2016
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of PRC.
Table of Contents
Forward ... 3 
1 Scope ... 4 
2 Normative References ... 4 
3. Terms and Definitions ... 4 
4 Basic Requirements ... 5 
5 Energy Efficiency Grades ... 5 
6 Minimum Allowable Values of Energy Efficiency ... 6 
7 Evaluating Values of Energy Conservation ... 6 
8 Test Methods ... 7 
9 Inspection Rules ... 7 
10 Labels of Energy Efficiency Grades ... 8 
Forward
The Chapter 6 in this Standard is mandatory, while the rest are recommended.
This standard was drafted as per the rules specified in GB/T 1.1-2009.
This standard was proposed by the Resource Conservation and Environmental
Protection Division of the National Development and Reform Commission, as well as
the Department of Energy Conservation and Resources Utilization of the Ministry of
Industry and Information Technology.
This standard shall be under the jurisdiction of National Technical Committee for
Standardization of Energy Fundamentals and Management (SAC/TC 20), and National
Technical Committee on Agricultural Machinery of Standardization (SAC/TC 201).
Drafting organizations of this Standard. Technical Research Center of Fluid Machinery
Engineering in Jiangsu University, Chinese Academy of Agricultural Mechanization
Sciences, Taizhou Taifeng Pump Industry Co., Ltd., Shimge Pump Group Industry Co.,
Ltd., Leo Group Co., Ltd., Hangzhou SRT Pump Co., Ltd., Zhejiang Dayuan Pumps
Industrial Co., Ltd., Shandong Celebrity Group Co., Ltd., Zhejiang Qifeng Pump
Industry Co., Ltd., Zhejiang Fengqiu Pump Industry Co., Ltd., Nanjing Lanshen Pump
Group Co., Ltd., Zhejiang Fengyuan Pump Industry Co., Ltd., Haicheng Suprasuny
Pump Co., Ltd., Shanxi Skysea Pump Industry Co., Ltd., Taizhou Jiadi Pump Industry
Co., Ltd., and Zhejiang Wenling Institute of Supervision and Testing on Product Quality.
Chief drafting staffs of this Standard. Wang Yang, Zhang Xiansheng, Mao Ji, Xu
Mintian, Wang Xiangrong, Zhao Liwei, Lu Qiurong, Wang Guoliang, Zhou Jianquan,
Jiang Ronghua, Lou Qifeng, Chen Bin, Sun Jianguo, Li Lulu, Shang Huaiyuan, Chen
Xianyuan, Jin Shibin, and Lang Tao.
Minimum Allowable Values of Energy
Efficiency and Energy Efficiency Grades for
Waste Submersible Motor-Pumps
1 Scope
This Standard specifies the energy efficiency grades, minimum allowable values of
energy efficiency, evaluating values of energy conservation, test methods, inspection
rules, and labels of energy efficiency grades for the waste submersible motor-pumps.
This Standard is applicable to the single-phase or three-phase waste submersible
motor-pumps (hereinafter referred to as “pump”) that deliver various sewage, or mixed
liquid containing sand, fiber materials, manure, river silt and other insoluble solid
substances.
2 Normative References
The following documents are essential to the application of this document. For the
dated documents, only the versions with the dates indicated are applicable to this
document; for the undated documents, only the latest version (including all the
amendments) are applicable to this standard.
GB/T 2828.1 Sampling Procedures for Inspection by Attributes - Part 1. Sampling
Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-Lot Inspection
GB/T 2829 Sampling Procedures and Tables for Periodic Inspection by Attributes
(Apply to Inspection of Process Stability)
GB/T 12785-2014 Test Methods for Submersible Motor-Pumps
GB/T 24674 Waste Submersible Motor-Pumps
3. Terms and Definitions
The following terms and definitions, and those defined in GB/T 24674 are applicable
to this document.
3.1 Minimum allowable values of energy efficiency for waste submersible
motor-pumps