GB 30585-2024 English PDF (GB30585-2024)

Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click GB 30585-2024
Historical versions: GB 30585-2024
Preview True-PDF (Reload/Scroll if blank)

GB 30585-2024: Safety technical specifications for infants and children footwear
GB 30585-2024
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 61.060
CCS Y 78
Replacing GB 30585-2014
Safety technical specifications for infants' and children's
footwear
ISSUED ON: MAY 28, 2024
IMPLEMENTED ON: JUNE 01, 2025
Issued by: State Administration for Market Regulation;
National Standardization Administration.
Table of Contents
1 Scope ... 3
2 Normative references ... 3
3 Terms and definitions ... 4
4 Product classification ... 5
5 Technical requirements ... 5
6 Test methods ... 7
7 Determination ... 9
8 Implementation of the standard ... 9
Appendix A (Normative) List of decomposable carcinogenic aromatic amines ... 10
Appendix B (Normative) List of banned N-nitrosamine substances in rubber parts .. 11
Appendix C (Normative) Information on restricted phthalate plasticizers ... 12
Safety technical specifications for infants' and children's
footwear
1 Scope
This document defines the terms and definitions of infants' and children's footwear
safety; specifies product classification, technical requirements, judgments; describes
the corresponding test methods.
This document applies to footwear products made of various materials for children
under 14 years old (inclusive) and infants.
2 Normative references
The contents of the following documents constitute essential clauses of this document
through normative references in the text. Among them, for dated references, only the
version corresponding to that date applies to this document; for undated references, the
latest version (including all amendments) applies to this document.
GB/T 2703 Footwear - Terminology
GB/T 2912.1 Textiles - Determination of formaldehyde - Part 1: Free and
hydrolyzed formaldehyde (water extraction method)
GB 6675.2-2014 Safety of toys - Part 2: Mechanical and physical properties
GB/T 17592 Textiles - Determination of the banned azo colorant
GB/T 18414.1 Textiles - Determination of the content of chlorinated phenols -- Part
1: Gas chromatography/mass spectrography
GB/T 19941.1 Leather and fur - Determination of formaldehyde content - Part 1:
High performance liquid chromatography method
GB/T 19941.2 Leather and fur - Determination of formaldehyde content - Part 2:
Colorimetric method
GB/T 19942 Leather and fur - Chemical tests - Determination of banned azo
colorants
GB/T 22807 Leather and fur - Chemical tests - Determination of chromium VI
content
3.3
Sharp point
The protruding point on any part of the children's shoes that may cause harm to the
user.
3.4
Removable small accessory
Parts or components of a shoe that are designed to be removed without tools.
[Source: GB 6675.2-2014, 3.43, modified]
3.5
Children’s footwear
Shoes which have a size greater than 170 and are generally suitable for children aged
3 to 14 years old.
[Source: GB/T 2703-2017, 2.2.10, modified]
3.6
Infants’ footwear
Shoes which have a size not greater than 170 and are generally suitable for infants
aged 3 years and below.
[Source: GB/T 2703-2017, 2.2.44, modified]
4 Product classification
Children’s footwear is divided into the following two categories according to the wearer:
a) Infants' shoes;
b) Children’s shoes.
5 Technical requirements
5.1 Basic requirements
5.1.1 There shall be no broken needles inside or outside the shoe.
accuracy of not less than 1 mm.
6.4 Small accessories for infant and children shoes
6.4.1 Tensile test of non-detachable small accessories
Perform a general tensile test in accordance with 5.24.6.1 of GB 6675.2-2014.
6.4.2 Small accessory inclusion test
Perform the test in accordance with 5.2 of GB 6675.2-2014, to determine whether it can
be completely contained in the small parts tester.
6.5 Hexavalent chromium
Different samples shall be tested separately and in accordance with GB/T 22807 or
GB/T 38402. In case of dispute, the test result of GB/T 38402 shall prevail.
6.6 Decomposable carcinogenic aromatic amine dyes
6.6.1 Different samples shall be tested separately. If the lining and upper cannot be
separated, they shall be tested together in accordance with the test method of the lining
material. For the samples to be tested with other materials attached to the back, the other
materials attached to the back shall be completely peeled off before testing. If it is really
difficult to remove, the situation shall be noted in the report.
6.6.2 Textiles, artificial leather, synthetic leather shall be tested in accordance with
GB/T 17592; leather and fur shall be tested in accordance with GB/T 19942.
6.7 Formaldehyde
6.7.1 The specimen preparation is the same as 6.6.1.
6.7.2 Textiles, artificial leather, synthetic leather shall be tested according to GB/T
2912.1; leather and fur shall be tested according to GB/T 19941.1 or GB/T 19941.2. In
case of dispute, the test result of GB/T 19941.1 shall prevail.
6.8 Total amount of heavy metals
Different samples shall be inspected separately according to QB/T 4340.
6.9 Dimethyl fumarate
Different samples shall be inspected separately according to GB/T 26713.
6.10 Chlorophenol
6.10.1 The specimen preparation is the same as 6.6.1.
6.10.2 Textiles, artificial leather, synthetic leather shall be tested in accordance with
GB/T 18414.1; leather and fur shall be tested in accordance with GB/T 22808.
6.11 N-nitrosamines
Different samples shall be inspected separately in accordance with ISO 19577:2019.
6.12 Phthalates
Different samples shall be tested separately. For samples with other materials attached
to the back, the other materials attached to the back shall be completely peeled off
before testing. If it is really difficult to remove, the situation shall be noted in the report.
It is inspected in accordance with GB/T 32440.1.
6.13 Short-chain chlorinated paraffins
6.13.1 Specimen preparation is the same as 6.6.1.
6.13.2 Textiles shall be inspected in accordance with GB/T 40263; leather, fur, artificial
leather, synthetic leather shall be inspected in accordance with GB/T 38405; synthetic
materials such as rubber and plastic shall be inspected in accordance with SN/T 3814.
7 Determination
Determination shall be made in accordance with Chapter 5. If all the test results meet
the requirements of Chapter 5, the sample shall be judged as qualified; otherwise, it
shall be unqualified.
8 Implementation of the standard
For products produced or imported before the implementation date of this document,
implementation shall begin from the 13th month from the date of implementation of
this document.