Skip to product information
1 of 11

PayPal, credit cards. Download editable-PDF & invoice in 1 second!

GB 30485-2013 English PDF (GB30485-2013)

GB 30485-2013 English PDF (GB30485-2013)

Regular price $85.00 USD
Regular price Sale price $85.00 USD
Sale Sold out
Shipping calculated at checkout.
Quotation: In 1-minute, 24-hr self-service. Click here GB 30485-2013 to get it for Purchase Approval, Bank TT...

GB 30485-2013: Standard for pollution control on co-processing of solid wastes in cement kiln

This Standard specifies the technical requirements for cement kiln facilities for co-processing solid wastes, property requirements of wastes entering the kiln, technical requirements for operation, emission limit of pollutants, control requirements, monitoring, supervision and management requirements for pollutants caused by cement products manufactured. This Standard is applicable to the pollution control, supervision and management during the process of co-processing hazardous wastes, household wastes, sludge caused by urban and industrial wastewater treatment, processing waste of animals and plants, polluted soil, emergency wastes and other solid wastes using cement kiln. When using cement kiln to co-process household wastes, if the mass of household wastes added exceeds 30% of the total mass of kiln (furnace) materials, the Standard for Pollution Control on the Municipal Solid Waste Incineration shall be executed. This Standard applies to the behavior of pollutants emission allowed by law. Site selection of newly established pollution source and management of existing pollution source within the special protection zone shall be executed in accordance with relevant provisions of Law of the Peoples Republic of China on the Prevention and Control of Atmospheric Pollution, Law of the Peoples Republic of China on the Prevention and Control of Water Pollution, Marine Environment Protection Law of the Peoples Republic of China, Law of the People.
GB 30485-2013
GB
NATIONAL STANDARD
OF THE PEOPLE REPUBLIC OF CHINA
Standard for pollution control on co-processing of solid
wastes in cement kiln
ISSUED ON. DECEMBER 27, 2013
IMPLEMENTED ON. MARCH 1, 2014
Issued by. Ministry of Environmental Protection State Administration for Quality Supervision and Inspection and Quarantine
Ministry of Environmental Protection of the PEOPLE Republic of China
2013 No. 80
In order to carry out Environmental Protection Law of the People's Republic of China, Law of the People's Republic of China on Prevention and Control of Atmospheric Pollution and Law of the People's Republic of China on Prevention and Control of Water Pollution, prevent and control pollution, protect environment, and protect human health, we hereby approve the 4 standards including Emission Standard of Atmospheric Pollutants for Cement Industry as the national standards for emission (control) of pollutants. They are jointly issued by the Ministry of Environmental Protection and State Administration for Quality Supervision and Inspection and Quarantine. Standard names and standard numbers are as follows. 1. Emission standard of atmospheric pollutants for cement industry (GB
4915-2013);
2. Standard for pollution control on co-processing of solid wastes in cement kiln (GB 30485-2013);
3. Emission standard of pollutants for battery industry (GB 30484-2013); 4. Emission standard of water pollutants for leather and fur making industry (GB 30486-2013).
In accordance with the provisions of relevant laws, above standards are compulsory. The above standards are effective since March 1, 2014.
The above standards have been published by the China Environmental Press and the standards?€? contents can be searched from the website of the Ministry of Environmental Protection (bz.mep.gov.cn). Newly established enterprises shall stop to execute GB 4915-2004 Emission Standard of Air Pollutants for Cement Industry from March 1, 2014. And existing enterprises shall stop to execute GB 4915-2004 from July 1, 2015. Hereby it is noticed.
Ministry of Environmental Protection
December 27, 2013
Table of Contents
Foreword ... 4
1 Scope of application ... 6
2 Normative references ... 7
3 Terms and definitions ... 8
4 Co-processing facilities ... 10
5 Characteristics of kiln co-processed solid waste ... 12
6 Operation technical requirements ... 12
7 Pollutants emission limits ... 13
8 Pollution control of cement products ... 14
9 Monitoring requirements ... 15
10 Implementation and monitoring ... 16
Foreword
This Standard is hereby prepared to carry out Environmental Protection Law of the People's Republic of China, Law of the People's Republic of China on Prevention of Environmental Pollution Caused by Solid Waste, Law of the People's Republic of China on Prevention and Control of Atmospheric Pollution, Circular Economy Promotion Law of the People's Republic of China, Law of the People's Republic of China on Product Quality, and other laws and regulations to protect the environment, prevent and control the pollution caused during the process of co-processing solid wastes in the cement kiln, and to improve the production process and pollution control technology.
This Standard specifies the technical requirements for cement kiln facilities for co-processing solid wastes, property requirements of wastes entering the kiln, technical requirements for operation, emission limits of pollutants, control requirements, monitoring, supervision and management requirements for pollutants caused by cement products manufactured.
This Standard is first-time issued.
Emission of water pollutants, environment noises caused during the process of co-processing solid wastes in cement kiln is subject to relevant national emission standards for pollutants. And the identification, treatment and disposal of solids wastes caused are subject to relevant national control standards for solid waste pollution. Emission limits of the pollutants specified in this Standard are the basic requirements. Local provincial governments may develop local emission standard of pollutants for pollutant items that are not covered in this Standard. It may develop local emission standard of pollutants stricter than this Standard for pollutant items that are already covered in this Standard. If the limit values approved by the environmental influence assessment are stricter than that of this Standard or local standard, the limit values approved by the environmental influence assessment shall prevail.
This Standard was organized and formulated by Department of Science, Technology and Standards, Ministry of Environmental Protection of the PEOPLE Republic of China. Drafting organizations of this Standard. Chinese Research Academy of Environmental Sciences, China Building Materials Academy, Beijing Jinyu Mangrove Environmental Protection Technology Co., Ltd., and Foreign Economic Cooperation Office, Ministry of Environmental Protection.
The Standard was approved by Ministry of Environmental Protection on December 16, 2013.
This Standard will be implemented on March 1, 2014.
The Ministry of Environmental Protection is responsible for the interpretation of this Standard.
Standard for pollution control on co-processing of
solid wastes in cement kiln
1 Scope of application
This Standard specifies the technical requirements for cement kiln facilities for co-processing solid wastes, property requirements of wastes entering the kiln, technical requirements for operation, emission limit of pollutants, control requirements, monitoring, supervision and management requirements for pollutants caused by cement products manufactured.
This Standard is applicable to the pollution control, supervision and management during the process of co-processing hazardous wastes, household wastes (including waste plastics, waste rubbers, waste paper, waste tire, etc.), sludge caused by urban and industrial wastewater treatment, processing waste of animals and plants, polluted soil, emergency wastes and other solid wastes using cement kiln. When using cement kiln to co-process household wastes, if the mass of household wastes added exceeds 30% of the total mass of kiln (furnace) materials, the Standard for Pollution Control on the Municipal Solid Waste Incineration shall be executed.
This Standard applies to the behavior of pollutants emission allowed by law. Site selection of newly established pollution source and management of existing pollution source within the special protection zone shall be executed in accordance with relevant provisions of Law of the Peoples Republic of China on the Prevention and Control of Atmospheric Pollution, Law of the Peoples Republic of China on the Prevention and Control of Water Pollution, Marine Environment Protection Law of the Peoples Republic of China, Law of the People's Republic of China on Prevention of Environmental Pollution Caused by Solid Waste, Law of the Peoples Republic of China on Prevention and Control of Radioactive Pollution, Law of the People's Republic of China on Appraising of Environment Impacts and other laws, regulations and rules.
2 Normative references
The articles contained in the following documents have become part of this Standard when they are quoted herein. For the undated documents so quoted, the latest editions shall be applicable to this Standard.
GB 4915 Emission standard of air pollutants for cement industry
GB 14554 Emission standard for odor pollutants
GB 18597 Standard for pollution control on hazardous waste storage
GB/T 16157 The determination of particulates and sampling methods of gaseous pollutants emitted from exhaust gas of stationary source
HJ 77.2 Ambient air and waste gas Determination of polychlorinated
dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs)
HJ 543 Stationary source emission. Determination of mercury. Cold atomic absorption spectrophotometry (Provisional)
HJ 657 Ambient air and stationary source emission - Determination of metals in ambient particulate matter ?€? Inductively coupled plasma/mass spectrometry (ICP-MS)
HJ 662 Environmental protection technical specification for co-processing of Solid wastes in cement kiln
HJ 668 Water quality-Determination of total nitrogen by flow injection analysis (FIA) and N-(1-naphthyl) ethylene diamine dihydrochloride spectrophotometry
HJ/T 27 Stationary source emission -- Determination of hydrogen chloride -- Mercuric thiocyanate spectrophotometric method
HJ/T 38 Stationary source emission -- Determination of nonmethane hydrocarbons -- Gas chromatography
HJ/T 55 Technical guidelines for fugitive emission monitoring of air pollutants HJ/T 75 Specifications for continuous emissions monitoring of flue gas emitted from stationary sources (on trial)
HJ/T 176 Technical specifications for centralized Incineration facility construction on hazardous waste
environment protection in a centralized manner.
3.5
New dry process cement kiln
It refer...

View full details