Skip to product information
1 of 5

PayPal, credit cards. Download editable-PDF & invoice in 1 second!

GB 27999-2014 English PDF (GB27999-2014)

GB 27999-2014 English PDF (GB27999-2014)

Regular price $85.00 USD
Regular price Sale price $85.00 USD
Sale Sold out
Shipping calculated at checkout.
Quotation: 24-hr self-service. Click GB 27999-2014
See Chinese contents: GB 27999-2014

GB 27999-2014: Fuel consumption evaluation methods and targets for passenger cars

This Standard specifies the evaluation methods and targets for fuel consumption of vehicle type and corporate average fuel consumption of passenger cars. This Standard is applicable to all M1 type of vehicles with maximum design total mass not exceeding 3500kg, which include gasoline or diesel fueled vehicle, pure electric vehicle, fuel cell vehicle, plug-in hybrid electric vehicle, and gas fueled vehicle.
GB 27999-2014
GB
NATIONAL STANDARD OF THE
PEOPLE REPUBLIC OF CHINA
ICS 43.020
T 40
Replacing GB 27999-2011
Fuel Consumption Evaluation
Methods and Targets for Passenger Cars
ISSUED ON. DECEMBER 22, 2014
IMPLEMENTED ON. JANUARY 1, 2016
Issued by. General Administration of Quality Supervision, Inspection and Quarantine;
Standardization Administration of PRC.
Table of Contents
Foreword ... 3
Introduction ... 5
1 Scope ... 6
2 Normative References ... 6
3 Terms and Definitions ... 6
4 Evaluation Methods and Targets on Fuel Consumption of Vehicle Type ... 7 5 Calculation Methods and Evaluation Targets of Corporate Average Fuel
Consumption ... 9
6 Production Consistency ... 11
Foreword
The Chapter 4, Chapter 5, Chapter 6 in this Standard are mandatory, while the rest are recommended.
This Standard was drafted as per the rules specified in GB/T 1.1-2009.
This Standard replaced GB 27999-2011 Fuel Consumption Evaluation Methods and Targets for Passenger Cars; compared with GB 27999-2011, this Standard has the major changes as follows.
--- Expanded the applicable scope of standard;
--- Added the definition of ?€?off-cycle technology/device?€?;
--- Straightened fuel consumption target of vehicle type;
--- Increased the new energy vehicles, and the determination method of fuel consumption for the alternative fuel vehicles;
--- Clearly include the new energy vehicles and alternative fuel vehicles into the accounting areas for the corporate average fuel consumption, and the provide the accounting method;
--- Cleary indicate that the corporate average fuel consumption shall be calculated according to the production and import volume.
This Standard was proposed by Ministry of Industry and Information Technology of the PEOPLE Republic of China.
This Standard shall be under the jurisdiction of National Technical Committee for Standardization of Automotive (SAC/TC 114).
Drafting organization of this Standard. China Automotive Technology and Research Center.
Participating drafting organizations of this Standard. Anhui Jianghuai Automobile Co., Ltd., Dongfeng Motor Co., Ltd., SAIC Motor Technical Center, Great Wall Motor Company Limited, Chery Automobile Co., Ltd., China First Automobile Co., Ltd., Brilliance China Automotive Holdings Co., Ltd., Chongqing Changan Automobile Co., Ltd., BASIC Motor Corporation Limited, BYD Automobile Industry Co., Ltd., Beiqi Foton Motor Co., Ltd., National Automobile Quality Supervision and Test Center (Xiangyang), Haima Automobile Group Co., Ltd., Chongqing Lifan Passenger Vehicle Co., Ltd., Jiangling Motors Co., Ltd., Jiangling Holdings Limited, Jiangxi Changhe Automobile Co., Ltd., Technical Center of SAIC-GM-Wuling Automobile Co., Ltd., SAIC General Motors Company Ltd., United Automotive Electronic Systems Co., Ltd., Shanghai Introduction
This Standard is an important measure to implement the Development Planning on Energy Saving and New Energy Automotive Industry(2012-2020); aims to promote the development and application of China?€?s advanced vehicle energy saving technology, and continue to reduce the fuel consumption of China?€?s passenger cars; so that the new vehicle average fuel consumption level of China?€?s passenger cars can be reduced to about 5L/100km by 2020, and the corresponding carbon dioxide emission is about 120g/km.
In order to encourage the development of new energy vehicles, certain preference is given to the pure electric passenger car, plug-in hybrid electric passenger car, and fuel cell passenger car when determining their fuel consumption of vehicle type, and corporate average fuel consumption in and before 2020.
In order to encourage the development and application of vehicle energy saving technology, for the energy saving technology or device that can?€?t be demonstrated or can?€?t be demonstrated completely in the existing test methods, but has significant energy-saving effect in the actual use; this Standard allows, when calculating the corporate average fuel consumption, taking the quantitative evaluation principle to correspondingly reduce the fuel consumption of vehicle type according to its energy saving effect.
Fuel Consumption Evaluation
Methods and Targets for Passenger Cars
1 Scope
This Standard specifies the evaluation methods and targets for fuel consumption of vehicle type and corporate average fuel consumption of passenger cars.
This Standard is applicable to all M1 type of vehicles with maximum design total mass not exceeding 3500kg, which include gasoline or diesel fueled vehicle, pure electric vehicle, fuel cell vehicle, plug-in hybrid electric vehicle, and gas fueled vehicle. This Standard is not applicable to the only-alcohol-ether fueled vehicle. 2 Normative References
The following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) are applicable to this document.
GB/T 18386 Electric Vehicles ?€? Energy Consumption and Range ?€? Test
Procedures
GB/T 19233 Measurement Methods of Fuel Consumption for Light-Duty Vehicles GB/T 19753 Test Methods for Energy Consumption of Light-Duty Hybrid Electric Vehicles
GB/T 29125 Test Methods for Fuel Consumption of CNG Vehicles
3 Terms and Definitions
The following terms and definitions are applicable to this document.
3.1 Fuel consumption of vehicle type
The comprehensive fuel consumption of certain type of vehicle determined as per the prescribed method.

View full details