Skip to product information
1 of 11

PayPal, credit cards. Download editable-PDF and invoice in 1 second!

CNCA C11-06-2014 English PDF (CNCAC11-06-2014)

CNCA C11-06-2014 English PDF (CNCAC11-06-2014)

Regular price $160.00 USD
Regular price Sale price $160.00 USD
Sale Sold out
Shipping calculated at checkout.
Quotation: 24-hr self-service. Click CNCA C11-06-2014
See Chinese contents: CNCA C11-06-2014

CNCA C11-06-2014: China Compulsory Certification Implementation Rules - Motor vehicle brake hose

This standard is established based on the safety risk and certification risk of Motor Vehicle Brake Hose. It stipulates the basic principles and requirements for the implementation of China Compulsory Certification for Motor Vehicle Brake Hose.
Serial No.. CNCA-C11-06.2014
Compulsory Product Certification Implementation Rules -
Motor Vehicle Brake Hose
Issued??on.??August??21,??2014 ??????????Effective??on.??January??1,??2015
Issued by. Certification and Accreditation Administration of the PEOPLE Republic of China (CNCA)
He is now the Sales Manager (Founder and Managing Director) at
expertise and hands-on working experiences, through his then-employment as ?€?China Certification Program Manager?€? at BlackBerry Beijing, and ?€?Product Safety and Compliance (PS and C) Manager?€? at Motorola Singapore.
- CNCA / China Compulsory Certification (CCC) regulations.
- Hands-on program experience with regulator CNCA for CCC mark?€?s
compliance, approval and management.
- Was an authorized representative by then-employer BlackBerry (RIM) to liaise with Chinese regulators, authorities, certification bodies and
designated laboratories ?€? including CNCA, CQC, Beijing Communication
Authority, Beijing Administration of Quality Supervision Inspection and Quarantine.
- Hands-on program experience with certification body CQC for
?€?certification entrusting?€?, type test, initial factory audit, regular / annual factory audit (i.e. the ?€?supervision after certification?€? in this Rules). - Manage, plan, guide and site-visit the global factories / suppliers?€? global factories (i.e. the ?€?manufacturing enterprises?€? in this Rules) in North America, Europe and China for CQC initial factory audit and regular
annual factory audit (supervision after certification).
- ISO Process Auditor, certified by Motorola USA and Motorola Singapore
- PMP, certified by Project Management Institute USA.
to deliver. < 2 hours in office time; < 10 hours in off-office time.
Table of Contents
0 Introduction ... 4
1 Application scope ... 4
2 Terms and definitions ... 4
3 Standards for certification ... 4
4 Certification modes ... 5
5 Classification of certification units ... 5
6 Certification entrusting ... 6
7 Certification implementation ... 6
8 Supervision after certification ... 10
9 Certificate ... 12
10 Certification marks ... 13
11 Charges ... 14
12 Certification responsibility ... 14
13 Certification implementation details ... 14
Attachment 1. Product description of brake-hose ... 16
Attachment 2. Production consistency requirements ... 18
Appendix 1. Factory quality assurance capability requirements ... 20
Attachment 3. Certification implementation of service parts for the after-sales maintenance for vehicles out of production ... 26
This Rules is established based on the security risk and certification risk of motor vehicle brake hose [Translator note. hereafter abbreviated as brake- hose]. It stipulates the basic principles and requirements for the implementation of compulsory product certification for brake-hose.
This Rules can be used with other general rules issued by Certification and Accreditation Administration (CNCA), such as ?€?Compulsory Product Certification Implementation Rules - Manufacturing Enterprise Classification Management, Certification Mode Selection and Determination?€?, ?€?Compulsory Product
Certification Implementation Rules ?€? Manufacturing Enterprise Testing Resource and Utilization of Other Certification Results?€?, ?€?Compulsory Product Certification Implementation Rules - Factory Inspection General Requirements?€?.
The certification body shall make principles for certification according to the general implementation rules and this Rules and implement them accordingly. Manufacturing enterprise shall ensure that their certified products are capable of sustaining the compliance with the certification and are compatible with the requirements of the standards.
This Rules applies to the braking system of M-, N-, 0-, and L-type motor vehicles.
(1) Hydraulic, pneumatic and vacuum brake-hose assemblies;
(2) Pneumatic and vacuum brake-hoses (It is limited to the brake-hoses that are installed on vehicles, without a permanent hose connector).
Due to the changes in the laws, regulations or related product standards, technology, industry policies and other causes which may change the applicable scope, the announcement released by CNCA shall be final and conclusive. 2????Terms??and??definitions
Brake-hose. The flexible hose that is used for transmission or storage of hydraulic, pneumatic or vacuum, so as to provide the braking force to the braking system. Brake-hose assembly. It is composed of brake-hose and brake-hose connector. The connection between the brake-hose and brake-hose connector is permanent connection.
GB 16897 Brake-hose - Structure, performance and test methods
In principle, the latest versions of above standards that are issued by the National Standardization Administration shall be executed. When other versions are required to use, then it shall be executed according to the applicable relevant standards issued by the State Certification and Accreditation
Administration (CNCA).
The basic certification mode of implementing the compulsory product
certification for brake-hose is.
Type test + initial factory inspection + supervision after certification; ?€?Supervision after certification?€? in above basic certification mode refers to 1 of the 3 modes ?€? after certification, follow-up inspection and factory on-site sampling testing OR inspection and sampling testing in the market OR
The certification body shall follow the requirements of ?€?Compulsory Product Certification Implementation Rules - Manufacturing Enterprise Classification Management, Certification Mode Selection and Determination?€? to carry out the classification management to manufacturing enterprise; consider the results of classification management; on the basis of basic certification mode,
appropriately increase the combination of supervision mode after certification, so as to determine the certification mode that is applicable to certification client [TRNASLATOR NOTE is not part of this Rules. Translator note. ?€?certification client?€?, the counterpart of certification body, refers to the Applicant / Manufacturer or its proxy (Power of Attorney). For ease of reading, hereinafter abbreviated as ?€?CLIENT?€?].
In principle, ?€?the brake-hose?€? products of the same-function, produced by the same-producer (manufacturer) and same-manufacturing enterprise (location), and having no significant difference in the following aspects could be classified as one certification unit.
(1) brake transmission (hydraulic, pneumatic and vacuum);
(2) brake-hose material;
(3) Connection method between hose connector and hose.
In principle, CLIENT shall put forward the certification entrusting based on the principle of unit classification. It may include multiple ?€?models (or specifications)?€? products in a same-unit. Same-model refers to those products of which the design has no impact to standard compliance.
For the same-product that is of same-manufacturer but of different
manufacturing enterprises, or for the same-model product that is of different manufacturers and of same-manufacturing enterprise, it may consider to only conduct the type test on the samples of 1 unit. The products of other
In general, after the type test and the production consistency control plan auditing are qualified, it shall conduct factory on-site inspection.
Certification body shall delegate the inspectors, who are State-registered and qualified inspectors for compulsory product certification, to form the inspection team to conduct the factory on-site inspection. When inspecting, manufacturing enterprise shall have the products running in production. If necessary, certification body may conduct extended inspection to the field and site other than the manufacturing enterprise [Translator note. This means that Certification Body may inspect/audit the part/component/material suppliers of the
manufacturing enterprise. For example, if the manufacturing enterprise only carry out the ?€?final assembly?€?, Certification Body may likely need to inspect/audit the critical components / sub-assembly supplier].
The factory on-site inspection time shall be made according to the...

View full details