YY 0505-2012 English PDF (YY0505-2012)

Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click YY 0505-2012
Historical versions: YY 0505-2012
Preview True-PDF (Reload/Scroll if blank)

YY 0505-2012: Medical electrical equipment. Part 1-2: General requirements for safety. Collateral standard: Electromagnetic compatibility. Requirements and tests
YY 0505-2012
Medical electrical equipment.Part 1-2. General requirements for safety.Collateral standard. Electromagnetic compatibility.Requirements and tests
ICS 11.140
C30
People's Republic of China pharmaceutical industry standards
YY 0505-2012/IEC 60601-1-2.2004
Replacing YY 0505-2005
(IEC 60601-1-2.2004, IDT)
Issued on. 2014-01-01 2012-12-17 implementation
State Food and Drug Administration issued
Table of Contents
Introduction Ⅲ
Introduction Ⅳ
The first chapter outlines
1 Scope and purpose 1
2 Terms and definitions 1
3 4 General requirements
6 Identification, marking and documents 5
The second to fourth in
The fifth chapter of unwanted or excessive radiation hazard protection
36 20 Electromagnetic Compatibility
Part VI to the tenth chapter
Appendix A (informative) total preparation instructions and guidelines 34
Annex B (informative) Table 201 to Table 208 Example 55
Appendix C (Informative Appendix) GB 4824 Classification Guide 64
Appendix D (Informative Appendix) YY 0505 applied to specific standard guidelines 66
Annex E (informative) Electromagnetic Environment 67
Annex F (normative) Normative documents 68
Annex G (informative) Basic performance determination guide 70
Non-medical electrical equipment Annex H (informative) within the system from EMC testing requirements of this standard determination guide 71
FIG completion table 201 201 --- description of equipment and systems 12 GB 4824
FIG completion table 202 201 --- description of GB 4343 and GB 17743 13 equipment and systems
Figure 203 14 202 The table below shows complete
FIG completion table 203 and 204 205 --- table shows the life support equipment and systems 18
FIG completion table 204 and 205 206 --- table describes non-life-support equipment and systems 18
Figure A.1 radiated immunity test cable arrangement example of FIG. 53
Figure A.2 have a cable and two cable devices maximum size of the example of Figure 54
Figure H.1 non-medical electrical equipment within the system whether from the present standard EMC test requirements determination process 71
YY 0505-2012/IEC 60601-1-2.2004
Table 201 Guidance and manufacturer's declaration electromagnetic emission --- --- 11 for all equipment and systems
Table 202 Guidance and manufacturer's declaration electromagnetic immunity --- --- 14 for all equipment and systems
Table 203 Guidance and manufacturer's declaration electromagnetic immunity --- --- life support equipment and systems 15
Table 204 Guidance and manufacturer's declaration electromagnetic immunity --- --- non-life-support equipment and systems 16
Table 205 Recommended separation distance between portable and mobile RF communications equipment and devices or systems --- and life support equipment
System 17
Table 206 Recommended separation distance between portable and mobile RF communications equipment and devices or systems --- non-life-support equipment and
System 17
Table 207 Guidance and manufacturer's declaration electromagnetic immunity --- --- provisions for shielding only place life support equipment and systems
Non-Life Table 208 Guidance and manufacturer's declaration electromagnetic immunity --- --- provisions for shielding only place equipment and support
System 20
Table 209 modulation frequency, physiological simulation frequency and operating frequency 26
Table 210 voltage sag immunity test level 32
Table 211 voltage interruptions immunity test level 32
Examples Table B.1 Table 201 (1) 55
Examples Table B.2 Table 201 (2) 55
Examples Table B.3 Table 201 (3) 56
Table B.4 Examples Table 202 56
Table B.5 immunity and instances in line with the level of the test (1) 57
Examples B.6 Table 203. Table 58
Table Example B.7 table 205 59
Examples Table B.8 table 204 60
Table Example B.9 table 206 60
Table B.10 immunity and instances in line with the level of the test (2) 61
Table 62 207 Table B.11 Examples
Table B.12 immunity and instances in line with the level of the test (3) 62
Table 63 208 Table B.13 Examples
Table E.1 electromagnetic environment 68
YY 0505-2012/IEC 60601-1-2.2004
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
Safety standards for medical electrical equipment is mainly composed of a first part of the "General requirements for safety" and the second part of the "requirements for safety."
This standard GB 9706.1-2007 "Medical Electrical Equipment Part 1. General requirements for safety" parallel standards. In addition to this criteria,
GB 9706.1-2007 other relevant collateral standard are.
--- GB 9706.15-2008 "Medical electrical equipment - Part 1-1. General requirements for safety Collateral standard. medical electrical systems
Safety requirements "(IEC 60601-1-1.2000, IDT);
--- GB 9706.12-1997 "Medical electrical equipment Part 1. General requirements for safety, Collateral Standard. diagnostic X-ray provided
General requirements for radiation protection equipment "(idt, IEC 60601-1-3.1994);
--- YY/T 0708-2009 "Medical electrical equipment - Part 1-4. General requirements for safety Collateral Standard. Programmable electrical medical
Gas systems "(IEC 60601-1-4.2000, IDT);
--- YY 0709-2009 "Medical electrical equipment - Part 1-8. General requirements for safety Collateral standard. General requirements for medical electrical
Gas equipment and medical electrical systems tests and guidance "alarm systems (IEC 60601-1-8.2003, IDT)
This standard replaces YY 0505-2005 "Medical electrical equipment - Part 1-2. General requirements for safety Collateral standard. Electromagnetic compatibility
Requirements and testing. "
This standard compared with YY 0505-2005, the main differences are as follows.
--- In order to be consistent with basic standards of the original standards made some editorial changes, such as. "Radiation of radio frequency electromagnetic fields" to "radio frequency electromagnetic
Field radiation "," RF "to" RF ";
--- Increased requirements A type of special equipment and systems;
--- Normative increased YY 0709-2009, remove the IEC 60601-1. 1988 (see Appendix F);
--- Added Appendix G, Appendix H;
The term --- Chapter 2 of this standard and terms of reference is represented by V bold.
This standard is identical with IEC 60601-1-2.2004 (2.1 version), namely IEC 60601-1-2.2001 A1.2004 "Medical Electrical Equipment
Part 1-2. General requirements for safety Collateral standard. Electromagnetic compatibility requirements and tests. " This standard and IEC 60601-1-2.2004
(Version 2.1) as compared to editorial changes made the following.
--- According to GB/T 1.1 for some formatting has been modified;
--- For other international standards quoted in the standard, if it has converted to our standards, this standard will be replaced by the corresponding international standard number
The number of national standards, and as noted in Appendix F relational;
--- In order to facilitate editing, appendix three-letter code was adjusted to a letter, such as the appendix AAA adjusted to Appendix A;
Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents.
This standard by the National Standardization Technical Committee medical appliances (SAC/TC10) and focal points.
This standard was drafted. Shanghai Medical Device detection, Liaoning Cape Medical Systems Co., Ltd., Siemens Shanghai Medical Equipment Co.,
the company.
The main drafters of this standard. Liu Jinglin, high school, handsome cattle, Ti...