1
/
su
8
PayPal, credit cards. Download editable-PDF and invoice in 1 second!
GB/T 33014.4-2016 English PDF (GBT33014.4-2016)
GB/T 33014.4-2016 English PDF (GBT33014.4-2016)
Prezzo di listino
$125.00 USD
Prezzo di listino
Prezzo scontato
$125.00 USD
Prezzo unitario
/
per
Spese di spedizione calcolate al check-out.
Impossibile caricare la disponibilità di ritiro
Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click GB/T 33014.4-2016
Historical versions: GB/T 33014.4-2016
Preview True-PDF (Reload/Scroll if blank)
GB/T 33014.4-2016: Road vehicles -- Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy -- Part 4: Bulk current injection (BCI)
GB/T 33014.4-2016
Road vehicles - Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy - Part 4. Bulk current injection (BCI)
ICS 43.040.10
T36
National Standards of People's Republic of China
Road vehicle electrical/electronic components for narrowband radiation
Electromagnetic energy immunity test method
Part 4. High Current Injection (BCI) Method
Part 4. Bulkcurrentinjection (BCI)
[ISO 11452-4..2005, Roadvehicles-Componenttestmethodsforelectrical
Part 4. Bulkcurrentinjection (BCI), MOD]
2016-10-13 release.2017-11-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People 's Republic of China
China National Standardization Management Committee released
Preface
GB/T 33014 "Road vehicles electrical/electronic components of narrow-band radiation electromagnetic energy immunity test method" includes the following parts.
- Part 1. General provisions;
Part 2. Anechoic chamber method;
- Part 3. transverse electromagnetic wave (TEM) chamber method;
- Part 4. High current injection (BCI) method;
- Part 5. Stripe line method;
- Part 7. Radio frequency (RF) power direct injection method;
- Part 8. Magnetic field immunity method;
- Part 9. Portable transmitter simulation;
Part 10. Conduction immunity method for extended audio range;
Part 11. Reverberation chamber method.
This part is part 4 of GB/T 33014.
This part is drafted in accordance with the rules given in GB/T 1.1-2009.
This part uses the re-drafting method to modify the use of ISO 11452-4..2005 "road vehicles narrowband radiation electromagnetic energy caused by electrical harassment
Part test methods - Part 4. High current injection (BCI) method.
The technical differences between this section and ISO 11452-4..2005 are as follows.
- the preparation of Chapter 1 in accordance with GB/T 1.1-2009;
--- ISO 11452-1 referenced by the original international standard is changed to GB/T 33014.1 with ISO 11452-1;
- the original international standard 7.2 in the artificial network using Appendix C, this part to its content equivalent to GB/T 33014.2-2016
In Appendix A, to avoid duplication of the same content and the original international standards are not completely unified;
- The remote/proximal grounding in the original International Standard 7.2 is in Appendix D, and this part is changed to its equivalent GB/T 33014.2-2016
In Appendix B, to avoid duplication of the same content and the original international standards are not fully unified;
- in the normative reference documents to increase GB/T 33014.2-2016;
In order to achieve consistency with the understanding and presentation of Part 1, I, II, III, IV, and V of Table C.1 (Original E.1) are changed to
L1, L2, etc., I, Ⅱ, Ⅲ, etc. understood as the state Ⅰ, Ⅱ, Ⅲ and so on.
The following editorial changes have been made in this section.
--- deleted the original international standard preface and introduction.
- delete Appendix C and Appendix D of the original International Standard, this section changes Appendix E of the original International Standard to Appendix C;
This part is made by the Ministry of Industry and Information Technology of the People's Republic of China.
This part is owned by the National Automobile Standardization Technical Committee (SAC/TC114).
This part of the drafting unit. China Automotive Technology Research Center, Shenzhen City Hang Sheng Electronics Co., Ltd., China Testing Technology Co., Ltd. limited
Company, Shanghai Automotive Group Passenger Car Company, Suzhou Tai Site Electronic Technology Co., Ltd., China Electronic Technology Standardization Institute, Shanghai Volkswagen
Automobile Co., Ltd., Changchun Automobile Testing Center, Shenzhen BYD Automobile Co., Ltd., BMW (China) Automobile Trading Co., Ltd., Denso
(China) Investment Limited.
This part of the main drafters. Xu Xiuxiang, Ding Yifu, Wang Xibin, Li Yunhong, Ma Qian, Sun Chengming, Cui Qiang, Liu Xinliang, Lin Yanping,
Zhou Xuguang, Zhang Yue, Zhu Yan.
Road vehicle electrical/electronic components for narrowband radiation
Electromagnetic energy immunity test method
Part 4. High Current Injection (BCI) Method
1 Scope
This part of GB/T 33014 specifies the anti-interference test method for electrical/electronic components for continuous narrowband radioactive harassment outside the vehicle.
Current injection (BCI) method.
This part applies to M, N, O, L vehicles (not limited to vehicle power systems such as spark ignition engines, diesel engines, electric
Machine) with electrical/electronic components.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, the only dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 33014.1 Road vehicles - Test methods for the immunity of electrical/electronic components to narrowband radiated electromagnetic energy - Part 1.
(GB/T 33014.1-2016, ISO 11452-1..2005, MOD)
GB/T 33014.2-2016 Road vehicles - Test methods for the immunity of electrical/electronic components to narrowband radiated electromagnetic energy - Part 2
Sectional. Anechoic chamber method (ISO 11452-2..2004, MOD)
3 terms and definitions
GB/T 33014.1 Definitions of terms and definitions apply to this document.
4 test conditions
The frequency range for the high current injection (BCI) method is a direct function of the current probe characteristics, ranging from 1MHz to 400MHz. Required electricity
Flow probe is more than one type.
The user should specify the severity of the test within the frequency range, the recommended test severity level see Appendix C.
The following standard test conditions shall comply with the provisions of GB/T 33014.1.
--- test temperature;
--- test voltage;
--- Modulation;
Stay time
The frequency step
--- the definition of the harsh rating;
--- test signal quality.
5 test sites
The test shall be carried out in a shielded room.
6 Test equipment and instruments
6.1 Overview
The high current injection (BCI) method is a method of using a current injection probe to directly couple a disturbance signal to a harness for performing a immunity test.
law. The injection probe is a current transformer, through which the harness of the DUT is passed. By changing the severity of the test and sensing the harassment
Frequency of the anti-interference test.
6.2 Test equipment and equipment
6.2.1 Current injection probe (probe group). The test device output signal coupled to the DUT, regardless of the system load size, should cover the whole band,
The probe set can receive continuous input power in the full range.
6.2.2 Current measurement probe (probe group). should cover the whole band.
6.2.3 Artificial Network (AN). See 7.2.
6.2.4 Radio frequency (RF) signal generator. with internal or external modulation capabilities.
6.2.5 Power amplifier.
6.2.6 Power meter (or equivalent measuring instrument). used to measure the forward power and reflected power.
6.2.7 Current measuring equipment.
6.3 DUT excitation and monitoring equipment
The drive should be operated as far as possible using the DUT to reduce the influence of electromagnetic properties. Such as plastic button, plastic pipe pneumatic device.
Devices that monitor DUT's electromagnetic interference characteristics can use fiber or high-impedance wires, or other types of electrical
Line, but to minimize the interaction between the wires. T...
Get QUOTATION in 1-minute: Click GB/T 33014.4-2016
Historical versions: GB/T 33014.4-2016
Preview True-PDF (Reload/Scroll if blank)
GB/T 33014.4-2016: Road vehicles -- Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy -- Part 4: Bulk current injection (BCI)
GB/T 33014.4-2016
Road vehicles - Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy - Part 4. Bulk current injection (BCI)
ICS 43.040.10
T36
National Standards of People's Republic of China
Road vehicle electrical/electronic components for narrowband radiation
Electromagnetic energy immunity test method
Part 4. High Current Injection (BCI) Method
Part 4. Bulkcurrentinjection (BCI)
[ISO 11452-4..2005, Roadvehicles-Componenttestmethodsforelectrical
Part 4. Bulkcurrentinjection (BCI), MOD]
2016-10-13 release.2017-11-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People 's Republic of China
China National Standardization Management Committee released
Preface
GB/T 33014 "Road vehicles electrical/electronic components of narrow-band radiation electromagnetic energy immunity test method" includes the following parts.
- Part 1. General provisions;
Part 2. Anechoic chamber method;
- Part 3. transverse electromagnetic wave (TEM) chamber method;
- Part 4. High current injection (BCI) method;
- Part 5. Stripe line method;
- Part 7. Radio frequency (RF) power direct injection method;
- Part 8. Magnetic field immunity method;
- Part 9. Portable transmitter simulation;
Part 10. Conduction immunity method for extended audio range;
Part 11. Reverberation chamber method.
This part is part 4 of GB/T 33014.
This part is drafted in accordance with the rules given in GB/T 1.1-2009.
This part uses the re-drafting method to modify the use of ISO 11452-4..2005 "road vehicles narrowband radiation electromagnetic energy caused by electrical harassment
Part test methods - Part 4. High current injection (BCI) method.
The technical differences between this section and ISO 11452-4..2005 are as follows.
- the preparation of Chapter 1 in accordance with GB/T 1.1-2009;
--- ISO 11452-1 referenced by the original international standard is changed to GB/T 33014.1 with ISO 11452-1;
- the original international standard 7.2 in the artificial network using Appendix C, this part to its content equivalent to GB/T 33014.2-2016
In Appendix A, to avoid duplication of the same content and the original international standards are not completely unified;
- The remote/proximal grounding in the original International Standard 7.2 is in Appendix D, and this part is changed to its equivalent GB/T 33014.2-2016
In Appendix B, to avoid duplication of the same content and the original international standards are not fully unified;
- in the normative reference documents to increase GB/T 33014.2-2016;
In order to achieve consistency with the understanding and presentation of Part 1, I, II, III, IV, and V of Table C.1 (Original E.1) are changed to
L1, L2, etc., I, Ⅱ, Ⅲ, etc. understood as the state Ⅰ, Ⅱ, Ⅲ and so on.
The following editorial changes have been made in this section.
--- deleted the original international standard preface and introduction.
- delete Appendix C and Appendix D of the original International Standard, this section changes Appendix E of the original International Standard to Appendix C;
This part is made by the Ministry of Industry and Information Technology of the People's Republic of China.
This part is owned by the National Automobile Standardization Technical Committee (SAC/TC114).
This part of the drafting unit. China Automotive Technology Research Center, Shenzhen City Hang Sheng Electronics Co., Ltd., China Testing Technology Co., Ltd. limited
Company, Shanghai Automotive Group Passenger Car Company, Suzhou Tai Site Electronic Technology Co., Ltd., China Electronic Technology Standardization Institute, Shanghai Volkswagen
Automobile Co., Ltd., Changchun Automobile Testing Center, Shenzhen BYD Automobile Co., Ltd., BMW (China) Automobile Trading Co., Ltd., Denso
(China) Investment Limited.
This part of the main drafters. Xu Xiuxiang, Ding Yifu, Wang Xibin, Li Yunhong, Ma Qian, Sun Chengming, Cui Qiang, Liu Xinliang, Lin Yanping,
Zhou Xuguang, Zhang Yue, Zhu Yan.
Road vehicle electrical/electronic components for narrowband radiation
Electromagnetic energy immunity test method
Part 4. High Current Injection (BCI) Method
1 Scope
This part of GB/T 33014 specifies the anti-interference test method for electrical/electronic components for continuous narrowband radioactive harassment outside the vehicle.
Current injection (BCI) method.
This part applies to M, N, O, L vehicles (not limited to vehicle power systems such as spark ignition engines, diesel engines, electric
Machine) with electrical/electronic components.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, the only dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 33014.1 Road vehicles - Test methods for the immunity of electrical/electronic components to narrowband radiated electromagnetic energy - Part 1.
(GB/T 33014.1-2016, ISO 11452-1..2005, MOD)
GB/T 33014.2-2016 Road vehicles - Test methods for the immunity of electrical/electronic components to narrowband radiated electromagnetic energy - Part 2
Sectional. Anechoic chamber method (ISO 11452-2..2004, MOD)
3 terms and definitions
GB/T 33014.1 Definitions of terms and definitions apply to this document.
4 test conditions
The frequency range for the high current injection (BCI) method is a direct function of the current probe characteristics, ranging from 1MHz to 400MHz. Required electricity
Flow probe is more than one type.
The user should specify the severity of the test within the frequency range, the recommended test severity level see Appendix C.
The following standard test conditions shall comply with the provisions of GB/T 33014.1.
--- test temperature;
--- test voltage;
--- Modulation;
Stay time
The frequency step
--- the definition of the harsh rating;
--- test signal quality.
5 test sites
The test shall be carried out in a shielded room.
6 Test equipment and instruments
6.1 Overview
The high current injection (BCI) method is a method of using a current injection probe to directly couple a disturbance signal to a harness for performing a immunity test.
law. The injection probe is a current transformer, through which the harness of the DUT is passed. By changing the severity of the test and sensing the harassment
Frequency of the anti-interference test.
6.2 Test equipment and equipment
6.2.1 Current injection probe (probe group). The test device output signal coupled to the DUT, regardless of the system load size, should cover the whole band,
The probe set can receive continuous input power in the full range.
6.2.2 Current measurement probe (probe group). should cover the whole band.
6.2.3 Artificial Network (AN). See 7.2.
6.2.4 Radio frequency (RF) signal generator. with internal or external modulation capabilities.
6.2.5 Power amplifier.
6.2.6 Power meter (or equivalent measuring instrument). used to measure the forward power and reflected power.
6.2.7 Current measuring equipment.
6.3 DUT excitation and monitoring equipment
The drive should be operated as far as possible using the DUT to reduce the influence of electromagnetic properties. Such as plastic button, plastic pipe pneumatic device.
Devices that monitor DUT's electromagnetic interference characteristics can use fiber or high-impedance wires, or other types of electrical
Line, but to minimize the interaction between the wires. T...
Share







