Passa alle informazioni sul prodotto
1 su 9

PayPal, credit cards. Download editable-PDF and invoice in 1 second!

GB/T 32661-2016 English PDF (GBT32661-2016)

GB/T 32661-2016 English PDF (GBT32661-2016)

Prezzo di listino $160.00 USD
Prezzo di listino Prezzo scontato $160.00 USD
In offerta Esaurito
Spese di spedizione calcolate al check-out.
Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click GB/T 32661-2016
Historical versions: GB/T 32661-2016
Preview True-PDF (Reload/Scroll if blank)

GB/T 32661-2016: Spherical silica powder
GB/T 32661-2016
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 81.040.30
Q 35
Spherical Silica Powder
球形二氧化硅微粉
ISSUED ON: APRIL 25, 2016
IMPLEMENTED ON: MARCH 1, 2017
Issued by: General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative References ... 4
3 Terms and Definitions ... 5
4 Classification and Labeling ... 5
5 Requirements ... 6
6 Test Methods ... 7
7 Inspection Rules ... 13
8 Marking, Packaging, Transportation and Storage ... 14
Spherical Silica Powder
1 Scope
This Standard specifies the terms and definitions, classification and labeling, requirements, test
methods, inspection rules, marking, packaging, transportation and storage of spherical silica
powder.
This Standard is applicable to spherical silica powder used in electronic packaging materials
fillers, copper-clad laminate fillers, etc. in the electronics and electrical appliance industries.
Spherical silica powder used for other purposes may refer to this Standard.
2 Normative References
The following documents are essential to the application of this Document. For the dated
documents, only the versions with the dates indicated are applicable to this Document; for the
undated documents, only the latest version (including all the amendments) is applicable to this
Document.
GB/T 191 Packaging – Pictorial Marking for Handling of Goods
GB/T 6284 Chemical products for industrial use - General method for determination of
water content - The loss of mass on drying method
GB/T 6678 General principles for sampling chemical products
GB/T 6908-2008 Analysis of water used in boil and cooling system-Determination of
electrical conductivity
GB/T 9724 Chemical reagent—General rule for the determination of pH
GB/T 11446.7 Test Method for Trace Anion in Electronic Grade Water by Ion
Chromatography
GB/T 14640-2008 Water used in industrial circulating cooling system and boiler -
Determination of potassium and sodium
GB/T 16418-2008 Particle system - Vocabulary
GB/T 19077.1 Particle size analysis - Laser diffraction methods - Part 1: General principles
GB/T 23774 Inorganic chemicals for industrial use - General method for the determination
of whiteness
JC/T 753-2001 Methods for chemical analysis of class making sands
SJ 3228.2 General rules for methods of analysis for high purity arenaceous quartz
SJ 3228.3 Determination of loss on ignition in high purity arenaceous quartz
SJ/T 10675-2002 Silicon dioxide micro-powder for electronic and electrical equipment
industry
3 Terms and Definitions
For the purposes of this Document, the following terms and definitions apply.
3.1 Median diameter
The particle size corresponding to when the cumulative particle size distribution percentage
reaches 50%. Written as D50, in μm.
NOTE: Adapted from GB/T 16418-2008, definition 2.2.1.9.
3.2 Degree of sphericity
The degree of particles close to a sphere.
NOTE 1: The sphericity of the sphere is 1.
NOTE 2: Adapted from GB/T 16418-2008, definition 2.2.2.16.
3.3 Rate of spheroidization
The ratio of the number of spherical particles to the total number of counted particles.
4 Classification and Labeling
4.1 Classification
4.1.1 According to use, it is divided into: electronic grade spherical silica powder (QYG-H),
ordinary spherical silica powder (QYG-R).
4.1.2 According to the median particle diameter D50 range, it is divided into five specifications:
030, 020, 010, 005 and 002.
4.2 Labeling
Labeled by application and median particle size specifications.
Sodium hexametaphosphate, analytically pure, mass fraction 0.5%.
6.5.3 Device
6.5.3.1 Microscope: with CCD module, pixels no less than 1 million, magnification no less than
100 times.
6.5.3.2 Computer: equipped with image processing software.
6.5.4 Determination
6.5.4.1 Using sodium hexametaphosphate with a mass fraction of 0.5% as the dispersion
medium, take an appropriate amount of sample and disperse it evenly on the glass slide.
6.5.4.2 Use a microscope to observe the sample and adjust the focus to the clearest field of view.
6.5.4.3 Select an area with well-dispersed particles in the field of view and record the image of
this area on the computer.
6.5.4.4 Use image processing software to analyze the recorded images and determine the
projected area and peripheral length of each particle.
6.5.5 Calculation
The degree of sphericity of a single particle is calculated according to Formula (1):
Where:
Φa - The measured degree of sphericity of a single particle;
A - The area of particle projection, in μm2;
B - Peripheral length of particle projection, in μm.
The measurement result of degree of sphericity is the arithmetic mean of the degree of
sphericity of 50 randomly selected complete particles in the image. Incomplete particles at the
edge of the image shall not be measured.
6.6 Rate of spheroidization
6.6.1 Principle
The ratio of the number of non-spherical particles to the total number of particles in the
statistical field of view is calculated. The basis for determining non-spherical particles is
particles with a degree of sphericity less than 0.85 or particles with acute-angled surfaces on
It shall be carried out according to the provisions of SJ 3228.3.
6.10 Extraction liquid
6.10.1 Preparation of extraction liquid
It shall be carried out according to the provisions of 6.11 in SJ/T 10675-2002.
6.10.2 Conductivity of extraction liquid
It shall be carried out according to the provisions of GB 6908.
6.10.3 pH value of extraction liquid
It shall be carried out according to the provisions of GB 9724.
6.10.4 Na+ content in the extraction liquid
It shall be carried out according to the provisions of Clause 5 of GB/T 14640-2008.
6.10.5 K+ content in the extraction liquid
It shall be carried out according to the provisions of Clause 4 of GB/T 14640-2008.
6.10.6 Cl- content in the extraction liquid
It shall be carried out in accordance with the provisions of GB/T 11446.7.
6.11 Screening allowance
6.11.1 Principle
Weigh a certain amount of sample; use a standard sieve to screen out particles with a particle
size larger than the required size; weigh the mass of the particles; and calculate their ratio to
the mass of the weighed sample.
6.11.2 Materials and instruments
Materials and instruments are as follows:
a) Standard screen;
b) Analytical balance;
c) Ultrasonic dispersion instrument;
d) 1000mL beaker;
e) Washing bottles.
h) Microscope, the optical magnification is no less than 60 times.
6.12.3 Determination
6.12.3.1 Add 100g of sample into a beaker containing 700mL of water; stir evenly with a
glass rod; and disperse ultrasonically for 3 min.
6.12.3.2 Use distilled water to clean the casing of the magnetic rod; insert the casing
vertically into the liquid in the beaker; then insert the magnetic rod into the casing; and
stir clockwise along the periphery of the container for 1 min.
6.12.3.3 Take out the magnetic rod and outer sleeve casing together; move them to another
beaker; pull out the magnetic rod; clean the surface of the outer sleeve casing with a
washing bottle; and collect the washing liquid.
6.12.3.4 Filter all the washing liquid through a double-layer screen, where the upper screen
has a pore size of 100μm and the lower screen has ...
Visualizza dettagli completi