Passa alle informazioni sul prodotto
1 su 12

PayPal, credit cards. Download editable-PDF and invoice in 1 second!

GB/T 24158-2018 English PDF (GBT24158-2018)

GB/T 24158-2018 English PDF (GBT24158-2018)

Prezzo di listino $215.00 USD
Prezzo di listino Prezzo scontato $215.00 USD
In offerta Esaurito
Spese di spedizione calcolate al check-out.
Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click GB/T 24158-2018
Historical versions: GB/T 24158-2018
Preview True-PDF (Reload/Scroll if blank)

GB/T 24158-2018: General specifications for electric motorcycles and electric mopeds
GB/T 24158-2018
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 43.140
T 80
Replacing GB/T 24158-2009
General specifications for electric motorcycles and electric
mopeds
ISSUED ON: SEPTEMBER 17, 2018
IMPLEMENTED ON: APRIL 01, 2019
Issued by: State Administration for Market Regulation;
Standardization Administration of the People's Republic of China.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative references ... 5
3 Terms and definitions ... 7
4 Model compilation ... 7
5 Technical requirements ... 9
6 Test methods ... 16
Annex A (normative) Conductive on-board battery charger ... 20
Annex B (normative) Main technical parameter items ... 23
Annex C (informative) Comparison on main test items, technical requirements and test
methods ... 24
General specifications for electric motorcycles and electric
mopeds
1 Scope
This Standard specifies the model establishment, technical requirements and test
methods for electric motorcycles and electric mopeds.
This Standard applies to pure electric motorcycles and pure electric mopeds (unless
otherwise specified, hereinafter referred to as electric motorcycles).
2 Normative references
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
GB 518, Motorcycle tyres
GB 4599, Motor vehicle headlamps equipped with filament lamps
GB 4660, Motor vehicle front fog lamps equipped with filament lamps
GB/T 5359.1, Term for motorcycles and mopeds - Part 1: Types of vehicles
GB/T 5359.2, Term for motorcycles and mopeds - Part 2: Performance of vehicles
GB/T 5359.3, Term for motorcycles and mopeds - Part 3: Dimensions of vehicle with
two and three wheels
GB/T 5359.4, Term for motorcycles and mopeds - Part 4: Mass of vehicle with two
and three wheels
GB/T 5373, Measuring method of dimensions and masses parameter for motorcycles
and mopeds
GB/T 5374, Test method of reliability for motorcycles and mopeds
GB/T 5375, Code of designation for motorcycles and mopeds
GB/T 5378, Methods of road test for motorcycles and mopeds
GB 7258, Technical specifications for safety of power-driven vehicles operating on
roads
GB 11554, Photometric characteristics of rear fog lamp for power-driven vehicles
and their trailers
GB 11564, Retro reflector for motor vehicles
GB 14023, Vehicles, boats and internal combustion engines - Radio disturbance
characteristics - Limits and methods of measurement for the protection of off-board
receivers
GB 15084, Motor vehicles - Devices for indirect vision - Requirements of
performance and installation
GB 15235, Photometric characteristics of reversing lamps for power-driven vehicles
GB 15365, Symbols for controls - Indicators and tell tales for motorcycles and
mopeds
GB/T 15367, Motorcycles and mopeds - Part and component - Designations for
vehicle with two and three wheels
GB 15742, Performance requirements and test methods of horn for motor vehicles
GB 16735, Road vehicle - Vehicle identification number (VIN)
GB 17352, Performance and installation requirements of rear views mirrors for
motorcycles and mopeds
GB 17353, Protective devices against unauthorized use for motorcycles and mopeds
GB 17509, Photometric characteristics of direction indicators for motor vehicles
and their trailers
GB 17510, Photometric characteristics of light-signaling devices for motorcycles
GB 18100.1, Provisions for installation of lighting and light-signaling devices for
motorcycles - Part 1: Two wheels motorcycle
GB 18100.2, Provisions for installation of lighting and light-signaling devices for
motorcycles - Part 2: Two wheels moped
GB 18100.3, Provisions for installation of lighting and light-signaling devices for
motorcycles - Part 3: Three-wheel motorcycles
GB 19152, Photometric characteristics of moped headlamps
GB/T 19596, Terminology of electric vehicles
GB 20073, Performance and measurement method for braking of motorcycles and
mopeds
The first letter of the uppercase Chinese pinyin in the name of the enterprise (or
trademark) shall not exceed three Chinese characters.
4.2.2 Specification code
The code of the rated power of the electric motorcycle drive motor. It is directly
expressed in numbers. It is the rated power of the electric motorcycle drive motor, in
watts (W).
4.2.3 Code of electric motorcycle
It is represented by a capital letter D.
4.2.4 Type code
The classification code of electric motorcycles. It shall be in accordance with the
provisions of GB/T 5375.
4.2.5 Design sequence number
The design sequence number of the basic vehicle with the same enterprise (or trademark)
name, specification and type. Use Arabic numerals 1, 2, 3... to indicate the design
sequence of electric motorcycles in turn. It shall be omitted when the design sequence
number is 1.
4.2.6 Improvement code
Serial number of vehicle modification. It is used to distinguish the characteristics and
series of vehicles. It is indicated by uppercase English letters (I, O, Q letters cannot be
used).
4.3 Example of model compilation
Example 1:
For the electric two-wheel moped designed for the third time and improved for the sixth
time, whose brand trademark is XX, the motor rated output power is 500W, its model
is represented by XX500DQT-3F.
Example 2:
For the electric moto three-wheel motorcycle (for cargo) designed for the first time and
improved for the second time, whose brand trademark is YY, the motor rated output
power is 1000W, its model is represented by YY1000DZH-B.
5 Technical requirements
5.1 Basic requirements
5.1.1 Vehicle identification number (VIN)
The composition of the vehicle identification number (VIN) and the engraving of the
code shall comply with the provisions of GB 16735 and GB 7258.
5.1.2 Vehicle signs and labels
Vehicle signs and labels shall comply with the provisions of GB 7258.
5.1.3 Main dimensions and quality parameters
The main dimensions and quality parameters shall comply with the requirements of
drawings and design documents. The overall dimensions, axle load and quality
parameters of the vehicle shall comply with the provisions of GB 7258.
5.1.4 Special safety requirements
The special safety requirements for electric motorcycles shall comply with the
provisions of GB 24155.
5.1.5 Steering device
The steering device shall comply with the provisions of GB 7258.
5.1.6 Maximum speed of vehicles with limited speed
The maximum speed of vehicles with limited speed shall comply with the provisions
of GB 7258.
5.1.7 Number of passengers
The number of passengers shall comply with the provisions of GB 7258.
5.1.8 Speedometer
Electric motorcycles shall be equipped with speedometers. The error of the indicated
value of the speedometer shall comply with the provisions of GB 7258.
5.1.9 Graphical symbols for controls, indicators and signaling devices
5.1.9.1 Graphical symbols of operating parts, indicators and signaling devices shall
comply with the provisions of GB 15365.
5.1.9.2 It shall be equipped with battery remaining power indicator device. The device
shall comply with the provisions of GB 24155.
5.1.10 Horn
The horn shall have the function of continuous sound. The horn performance and its
installation shall comply w...
Visualizza dettagli completi