1
/
su
4
PayPal, credit cards. Download editable-PDF and invoice in 1 second!
GB 8662-2006 English PDF (GB8662-2006)
GB 8662-2006 English PDF (GB8662-2006)
Prezzo di listino
$85.00 USD
Prezzo di listino
Prezzo scontato
$85.00 USD
Prezzo unitario
/
per
Spese di spedizione calcolate al check-out.
Impossibile caricare la disponibilità di ritiro
Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click GB 8662-2006
Historical versions: GB 8662-2006
Preview True-PDF (Reload/Scroll if blank)
GB 8662-2006: Fitting dimension between scalpel blades and handles
GB 8662-2006
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 11.040.30
C 31
GB 8662-2006 / ISO 7740.1985
Replacing GB 8662-1988
Fitting dimension between scalpel blades and handles
(ISO 7740.1985, Instruments for surgery - Scalpels with detachable blades -
Fitting dimensions, IDT)
ISSUED ON. SEPTEMBER 14, 2006
IMPLEMENTED ON. MAY 01, 2007
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of the People's Republic of China.
Table of Contents
Foreword... 3
1 Scope... 4
2 Fitting dimension between scalpel blades and handles... 4
Foreword
This Standard was developed to meet the needs of good fit and interchangeability
between scalpel handles and detachable blades.
This Standard corresponds to ISO 7740.1985 “Instruments for surgery - Scalpels with
detachable blades - Fitting dimensions”. This standard is equivalent to ISO 7740.1985.
Compared with ISO 7740.1985, the following editorial modifications are made in this
Standard.
- Change “this International Standard” to “this Standard”;
- Change the letters of relevant dimensions in Table 1, Table 2, Figure 1 and Figure
2.
This Standard replaces GB 8662-1988 “Fitting dimension between knife blades and
knife handles”.
The main differences between this Standard and GB 8662-1988 are as follows.
- Use Figure 1 in ISO 7740.1985;
- Add the note in Figure 1.
This Standard was proposed by and shall be under the jurisdiction of National Technical
Committee on Surgical Instruments of Standardization Administration of China.
Main drafting organizations of this Standard. Shanghai Medical Device Testing
Institute, Shanghai Medical Device (Group) Co., Ltd. Surgical Device Factory.
Main drafters of this Standard. Ni Zhidi, Zhang Hongxia.
This Standard was issued in 1988 for the first time.
Fitting dimension between scalpel blades and handles
1 Scope
This Standard specifies the fitting dimension between detachable scalpel blades and
handles.
2 Fitting dimension between scalpel blades and handles
2.1 Small fitting feature (No. 3)
The fitting dimensions for blades and handles with a small fitting feature shall be in
accordance with Table 1 and Figures 1 and 2.
2.2 Large fitting feature (No. 4)
The fitting dimensions for blades and handles with a large fitting feature shall be in
accordance with Table 2 and Figures 1 and 2.
Get QUOTATION in 1-minute: Click GB 8662-2006
Historical versions: GB 8662-2006
Preview True-PDF (Reload/Scroll if blank)
GB 8662-2006: Fitting dimension between scalpel blades and handles
GB 8662-2006
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 11.040.30
C 31
GB 8662-2006 / ISO 7740.1985
Replacing GB 8662-1988
Fitting dimension between scalpel blades and handles
(ISO 7740.1985, Instruments for surgery - Scalpels with detachable blades -
Fitting dimensions, IDT)
ISSUED ON. SEPTEMBER 14, 2006
IMPLEMENTED ON. MAY 01, 2007
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of the People's Republic of China.
Table of Contents
Foreword... 3
1 Scope... 4
2 Fitting dimension between scalpel blades and handles... 4
Foreword
This Standard was developed to meet the needs of good fit and interchangeability
between scalpel handles and detachable blades.
This Standard corresponds to ISO 7740.1985 “Instruments for surgery - Scalpels with
detachable blades - Fitting dimensions”. This standard is equivalent to ISO 7740.1985.
Compared with ISO 7740.1985, the following editorial modifications are made in this
Standard.
- Change “this International Standard” to “this Standard”;
- Change the letters of relevant dimensions in Table 1, Table 2, Figure 1 and Figure
2.
This Standard replaces GB 8662-1988 “Fitting dimension between knife blades and
knife handles”.
The main differences between this Standard and GB 8662-1988 are as follows.
- Use Figure 1 in ISO 7740.1985;
- Add the note in Figure 1.
This Standard was proposed by and shall be under the jurisdiction of National Technical
Committee on Surgical Instruments of Standardization Administration of China.
Main drafting organizations of this Standard. Shanghai Medical Device Testing
Institute, Shanghai Medical Device (Group) Co., Ltd. Surgical Device Factory.
Main drafters of this Standard. Ni Zhidi, Zhang Hongxia.
This Standard was issued in 1988 for the first time.
Fitting dimension between scalpel blades and handles
1 Scope
This Standard specifies the fitting dimension between detachable scalpel blades and
handles.
2 Fitting dimension between scalpel blades and handles
2.1 Small fitting feature (No. 3)
The fitting dimensions for blades and handles with a small fitting feature shall be in
accordance with Table 1 and Figures 1 and 2.
2.2 Large fitting feature (No. 4)
The fitting dimensions for blades and handles with a large fitting feature shall be in
accordance with Table 2 and Figures 1 and 2.
Share



