Passer aux informations produits
1 de 8

PayPal, credit cards. Download editable-PDF and invoice in 1 second!

GB/T 3565.1-2022 English PDF (GBT3565.1-2022)

GB/T 3565.1-2022 English PDF (GBT3565.1-2022)

Prix habituel $295.00 USD
Prix habituel Prix promotionnel $295.00 USD
Promotion Épuisé
Frais d'expédition calculés à l'étape de paiement.
Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click GB/T 3565.1-2022
Historical versions: GB/T 3565.1-2022
Preview True-PDF (Reload/Scroll if blank)

GB/T 3565.1-2022: Safety requirements for bicycles -- Part 1: Terms and definitions
GB/T 3565.1-2022
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 43.150
CCS Y 14
Safety requirements for bicycles - Part 1: Terms and
definitions
(ISO 4210-1 :2014, Cycles – Safety requirements for bicycles -
Part 1: Terms and definitions, MOD)
ISSUED ON: OCTOBER 12, 2022
IMPLEMENTED ON: AUGUST 01, 2023
Issued by: State Administration for Market Regulation;
Standardization Administration of the People's Republic of China.
Table of Contents
Foreword ... 3
Introduction ... 6
1 Scope ... 8
2 Normative references ... 8
3 Terms and definitions ... 8
Bibliography ... 16
Index ... 17
Foreword
This document was drafted in accordance with the rules given in GB/T 1.1-2020
"Directives for standardization - Part 1: Rules for the structure and drafting of
standardizing documents".
This document is Part 1 of GB(/T) 3565 "Safety requirements for bicycles". It is a
supporting standard with GB 3565.2~GB/T 3565.9. GB(/T) 3565 contains the
following parts:
- Part 1: Terms and definitions;
- Part 2: Requirements for city and trekking, young adult, mountain and racing
bicycles;
- Part 3: Common test methods;
- Part 4: Braking test methods;
- Part 5: Steering test methods;
- Part 6: Frame and fork test methods;
- Part 7: Wheel and rim test methods;
- Part 8: Pedal and drive system test methods;
- Part 9: Saddle and seat-post test methods.
The modification of this document adopts ISO 4210-1:2014 "Cycles - Safety
requirements for bicycles - Part 1: Terms and definitions".
This document has the following structural adjustments compared to ISO 4210-1:2014:
- Add Chapter 2 Normative references;
- Chapter 3 corresponds to Chapter 2 of ISO 4210-1:2014.
The technical differences between this document and ISO 4210-1:2014 and their
reasons are as follows:
- The definition of "crank assembly" has been changed. "When fatigue testing" and
"pedal shaft" have been deleted; "or crank shaft" has been added. "Parts of the
front half of the crank system" has been changed to "all parts of the drive system
fixed to the crank" to make the term and definition of "crank assembly" more
precise and easier to understand (see 3.13 of this Document; 3.13 of ISO 4210-
1:2014);
Safety requirements for bicycles - Part 1: Terms and
definitions
1 Scope
This document defines terms and definitions related to safety and performance
requirements for the design, assembly, and testing of bicycles and their components for
various saddle heights as given in Table 1.
This document does not apply to special types of bicycles such as delivery bicycles,
recumbent bicycles, tandem bicycles, BMX bicycles and bicycles designed and
equipped for riding under special conditions such as sanctioned racing, performance or
stunt classes.
NOTE: For bicycles with a maximum saddle height less than or equal to 435 mm, see GB 6675.2.
For bicycles with a maximum saddle height greater than 435 mm and less than 635 mm, see GB
14746.
Table 1 -- Maximum saddle height
2 Normative references
This document has no normative references.
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1 aerodynamic extension
A handlebar that is fixed to the handlebar or sheerer to improve the rider's riding posture
and reduce air resistance.
3.2 band brake
A strip of brake pads covers the surface of a cylindrical brake drum. The brake drum
Bicycle type
Max. saddle height
City and trekking bicycle Young adult bicycle Mountain bicycle Racing bicycle
mm
3.12 composite wheels
A wheel (3.63) assembly comprising a composite material (3.11).
3.13 crank assembly
An assembly consisting of a crank on the drive side and non-drive side, a middle shaft
or crankshaft and all parts of the drive system fixed to the crank.
Example: Sprocket set.
3.14 delivery bicycle
A two-wheeled bicycle (3.4) designed for transporting goods.
3.15 disc brake
A brake that uses brake pads to clamp the two sides of a thin disc attached to or
integrated with the wheel hub (axle skin).
3.16 drive belt
A seamless, endless belt used to transmit power.
3.17 dropper seat-post
A seat-post that the saddle can be raised or lowered without adjusting the saddle clamp
while riding.
3.18 exposed protrusion
A protruding object that, due to its location and rigidity, may cause injury to the rider if
the rider collides directly with it or accidentally falls on it during normal riding.
3.19 dummy fork
A test front fork manufactured according to specific requirements. It can be used as a
substitute for the front fork provided by the manufacturer during the test.
3.20 folding bicycle
A two-wheeled bicycle (3.4) designed to fold into a compact structure for easy transport
and storage.
3.21 fracture
Unexpected break into two or more pieces.
3.22 fork sheeter, fork stem
The part of the front fork that rotates around its axis inside the head tube of the frame.
NOTE: Typically, it is connected to the fork crown or directly to the fork leg, and is the connection
point between the fork and the sheeter.
3.23 fully assembled bicycle
A two-wheeled bicycle (3.4) assembled with all the components necessary for its
purpose.
3.24 handlebar grips portion
The part of the handlebar that runs from the handlebar end toward the center of the
handlebar and has the same diameter as the handlebar end.
3.25 highest gear
One crank rotation gives the gear ratio with the maximum travel distance.
3.26 hub brake
Brakes that act directly on the wheel hub (axle skin).
3.27 hub generator
A generator located in the wheel hub (axle skin).
3.28 lowest gear
One crank rotation gives the transmission ratio with the minimum travel distance.
3.29 maximum inflation pressure
The maximum tyre inflation pressure recommended by the tyre or rim manufacturer for
safe and effective use of the tyre.
NOTE: If both the rim and tyre manufacturers specify a maximum inflation pressure, use the
smaller of the two pressures.
3.30 maximum saddle height
The vertical distance from the ground level to the intersection of the top surface of the
saddle and the axis of the seat-post. When measuring, the seat-post is at the minimum
insertion depth and the saddle is horizontal.
3.31 maximum insertion-depth mark
A mark indicating the maximum insertion depth of the seat-post into the frame.
3.32 minimum insertion-depth mark
detached by moving the foot.
3.42 racing bicycle
A fully assembled bicycle for amateur high-speed riding on roads, equipped with a
handlebar assembly with multiple grip positions (to achieve a drag-reducing position,
e.g. dropped handlebars or aerodynamic handlebars), a multi-speed gear system, narrow
tyres, and a maximum mass of 12 kg.
3.43 recumbent bicycle
A two-wheeled bicycle (3.4) in which the rider is riding in a recumbent position.
3.44 rigid, non-welded fork
A fork which is not telescopic in structure, wherein the fork legs and/or the fork sheerer
(3.22) are fixed to the fork crown by pressing, clamping, bonding or other methods
other than brazing or welding.
3.45 rim-brake
A brake that the brake pads act on the brakes of the wheel rims.
3.46 rigid seat-post
The saddle tube cannot be raised or lowered during riding. It does not have an axially
adjustable elastic device for reducing the impact of road bumps on the rider.
3.47 sharing...
Afficher tous les détails