Passer aux informations produits
1 de 6

PayPal, credit cards. Download editable-PDF & invoice in 1 second!

GB/T 33650-2017 English PDF (GBT33650-2017)

GB/T 33650-2017 English PDF (GBT33650-2017)

Prix habituel $130.00 USD
Prix habituel Prix promotionnel $130.00 USD
Promotion Épuisé
Frais d'expédition calculés à l'étape de paiement.
Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click GB/T 33650-2017
Historical versions: GB/T 33650-2017
Preview True-PDF (Reload/Scroll if blank)

GB/T 33650-2017: Technical requirement of energy consumption evaluation for cement manufacturing
GB/T 33650-2017
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 27.010
F 01
Technical Requirement of Energy Consumption
Evaluation for Cement Manufacturing
ISSUED ON. MAY 12, 2017
IMPLEMENTED ON. DECEMBER 1, 2017
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of PRC.
3. No action is required - Full-copy of this standard will be automatically and
immediately delivered to your EMAIL address in 0~60 minutes.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative References ... 4
3 Terms and Definitions ... 5
4 Evaluation Condition and Range ... 5
5 Evaluation Index System and Index Requirements ... 5
6 Calculation Method ... 9
7 Evaluation Report ... 12
Appendix A (Informative) Report Template ... 13
Foreword
This Standard was drafted as per the rules specified in GB/T 1.1-2009.
This Standard was proposed by China Building Material Federation.
This Standard shall be under the jurisdiction of Building Material Industry Energy
Management Subcommittee of National Technical Committee for Standardization of
Energy Infrastructure and Management (SAC/TC 20/SC 10).
Drafting organizations of this Standard. Sinoma International Engineering Co., Ltd.,
Beijing Guojian Lianxin Attestation Center Co., Ltd., and Beijing University of
Technology.
Chief drafting staffs of this Standard. Wu Qingtao, Di Dongren, Cui Suping, Tao Congxi,
Yin Jingyu, Han Guanghui, Liang Qian, Liu Qingyi, and Feng Wenjing.
Technical Requirement of Energy Consumption
Evaluation for Cement Manufacturing
1 Scope
This Standard specifies the terms and definitions, evaluation conditions and range,
evaluation index system and index requirements, calculation methods and evaluation
report of energy consumption evaluation for cement manufacturing.
This Standard is applicable to the energy consumption evaluation for common Portland
cement and clinker manufacturing process.
2 Normative References
The following documents are essential to the application of this document. For the
dated documents, only the versions with the dates indicated are applicable to this
document; for the undated documents, only the latest version (including all the
amendments) are applicable to this document.
GB/T 3485 Technical Guides for Evaluating the Rationality of Electricity Usage in
Industrial Enterprise
GB 17167 General Principle for Equipping and Managing of the Measuring
Instrument of Energy in Organization of Energy Using
GB/T 23331 Management System for Energy – Requirements
GB/T 24851 Specification for Equipping and Managing of Measuring Instrument
of Energy in Building Material Industry
GB/T 26281 Calculating Methods for Heat Balance, Heat Efficiency and
Comprehensive Energy Consumption of Cement Rotary Kiln
GB/T 26282 Measuring Methods of Heat Balance of Cement Rotary Kiln
GB/T 27977 Test and Calculation Methods of Electricity Efficiency of Cement
Production
GB/T 33652-2017 Technical Regulation of Energy Consumption Test for Cement
Manufacturing
6 Calculation Method
6.1 Calculation method of cogeneration energy consumption ratio
The calculation of cogeneration energy consumption ratio can refer to Formula (1).
Where.
ηfd – cogeneration energy consumption ratio;
0.1229 – power conversion coefficient of standard coal (equivalent coefficient);
β – electricity generation per ton clinker; in kW•h/t;
ecl – comprehensive coal consumption of clinker, in kgce/t.
6.2 Calculation method of second-level index weight for energy consumption
evaluation on different types of production lines
6.2.1 Confirmation of second-level index weight for energy consumption
evaluation on the cement production line
The second-level index weight ac1 for energy consumption evaluation on cement
production line can refer to Table 1.
6.2.2 Calculation method of second-level index weight for energy consumption
evaluation on the clinker production line
The second-level items for energy consumption evaluation on the clinker production
line include crude fuel pre-treatment, raw meal preparation, fuel preparation, clinker
burning, cogeneration and auxiliary production system.
The calculation of energy consumption evaluation on clinker production line can refer
to Formula (2).
Where.
ac2 – second-level index weight for energy consumption evaluation on clinker
production line;
ac1 – second-level index weight for energy consumption evaluation on cement
production line, see Table 1;
the calculation method can refer to Table 3.
Table 3 -- Energy Consumption Index Calculation Score Form
6.3.3 Calculation for assessment score of single second-level evaluation index
in cement manufacturing enterprise
The second-level index in the evaluation index for cement manufacturing enterprise is
based on the data that is actually reached by the enterprise during the assessing
period; the calculation can refer to Formula (4).
Where.
Pi – assessment score or second-level evaluation index of the ith item;
ai – weight value of second-level evaluation index of the ith item;
Sij - the score corresponding to different classes in the second-level index of ith item (j
is corresponding to Class-A, Class-B, or Class-C)
6.4 Calculation of energy consumption comprehensive evaluation value for
cement manufacturing
The calculation of comprehensive evaluation value can refer to Formula (5).
Where.
P – energy consumption comprehensive evaluation value of the enterprise, with 0~100;
Pi – assessment score of the second-level index of the ith item;
n – the total number of second-level indexes participating in the assessment.
Manufacturing Situation Class-A Class-B Class-C Class-C
Below
Corresponding
score Sij
Positive index
Reverse index
NOTE. Xi is the actual value for the evaluation index of the ith item;
Bmax(i) indicates the maximum value in the Class-B benchmark range of the ith item index; Bmin(i) indicates the minimum value in the
Class-B benchmark range of the ith item index;
Cmax(i) indicates the maximum value in the Class-C benchmark range of the ith item index; Cmin(i) indicates the minimum value in the
Class-C benchmark range of the ith item index.

Afficher tous les détails