1
/
de
5
PayPal, credit cards. Download editable-PDF and invoice in 1 second!
GB/T 19799.1-2015 English PDF (GBT19799.1-2015)
GB/T 19799.1-2015 English PDF (GBT19799.1-2015)
Prix habituel
$85.00 USD
Prix habituel
Prix promotionnel
$85.00 USD
Prix unitaire
/
par
Frais d'expédition calculés à l'étape de paiement.
Impossible de charger la disponibilité du service de retrait
Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click GB/T 19799.1-2015
Historical versions: GB/T 19799.1-2015
Preview True-PDF (Reload/Scroll if blank)
GB/T 19799.1-2015: Non-destructive testing -- Ultrasonic testing -- Specification for calibration block No.1
GB/T 19799.1-2015
GB
NATIONAL STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 19.100;25.160.40
J 04
GB/T 19799.1-2015 / ISO 2400.2012
Replacing GB/T 19799.1-2015
Non-destructive testing - Ultrasonic testing -
Specification for calibration block No. 1
(ISO 2400.2012, IDT)
ISSUED ON. OCTOBER 9, 2015
IMPLEMENTED ON. JUNE 1, 2016
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration Committee.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative references ... 5
3 Terms and definitions ... 5
4 Manufacture ... 5
5 Velocities ... 8
6 Marking ... 9
7 Declaration of conformity ... 9
8 Possible modifications to block No. 1 ... 9
9 Existing blocks ... 11
Annex A (Normative) Determination of velocities ... 12
Foreword
This Part was drafted in accordance with the rules given in GB/T 1.1-2009.
This Part replaces GB/T 19799.1-2005 Non-destructive testing - Ultrasonic
testing - Calibration block No.1.
Compared with GB/T 19799.1-2005, this Part makes the following main
modifications.
- modified the scope (see Clause 1 of this edition; Clause 1 of Edition 2005);
- added normative references (see Clause 2 of this edition);
- added terms and definitions (see Clause 3 of this edition);
- modified material (see 4.1 of this edition; 2.1 of Edition 2005);
- modified dimensions (see 4.2 of this edition; 2.2 of Edition 2005);
- added machining, heat treatment and surface finish (see 4.3 of this
edition);
- added reference marks (see 4.4 of this edition);
- added requirements for velocities (see Clause 5 of this edition);
- added marking (see Clause 6 of this edition);
- added declaration of conformity (see Clause 7 of this edition);
- added possible modifications to block No. 1 (see Clause 8 of this edition);
- added existing blocks (see Clause 9 of this edition);
- added normative annex “Determination of velocities” (see Annex A).
This Part uses translation method and identically uses ISO 2400.2012 Non-
destructive testing - Ultrasonic testing - Specification for calibration block No. 1
(English version).
The Chinese document which has consistency with the international normative
reference in this Part is as follows.
- GB/T 12604.1-2005 Non-destructive testing - Terminology - Terms used
in ultrasonic testing (ISO 5577.2000, IDT)
This Part was proposed by and shall be under jurisdiction of National Technical
Committee on Non-destructive Testing of Standardization Administration of
China (SAC/TC 56).
The drafting organizations of this Part. Shanghai Materials Research Institute,
Shandong Ruixiang Mold Co., Ltd. (Shandong Jining Mold Factory), Wujiang
Hongda Flaw Detection Equipment Co., Ltd., Luoyang LYC Bearing Co., Ltd.,
Shanghai COSCO Kawasaki Heavy Industries Steel Structure Co., Ltd.,
Shanghai Jianke Inspection Co., Ltd., Shanghai Heavy Machinery Factory Co.,
Ltd., Dehua Material Testing Co., Ltd.
Main drafters of this Part. Xi Lifeng, Ding Jie, Jiang Wei, Jin Yufei, Wei Zhongrui,
Chen Cuili, Shen Mingkui, Tian Ruibin, Fan Weidong, Yin Fei, Cai Xiao, Xu
Hong, Xia Weilin, Hua Ruxi.
Version of standard substituted by this Standard is.
- GB/T 19799.1-2005.
Non-destructive testing - Ultrasonic testing -
Specification for calibration block No. 1
1 Scope
This Part of GB/T 19799 specifies requirements for the dimensions, material
and manufacture of a steel block for calibrating ultrasonic test equipment used
in manual testing.
2 Normative references
The following referenced documents are indispensable for the application of
this document. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any
amendments) applies.
ISO 5577, Non-destructive testing - Ultrasonic inspection - Vocabulary
EN 1330-4, Non-destructive testing - Terminology - Part 4. Terms used in
ultrasonic testing
EN 10025-2, Hot rolled products of structural steels - Part 2. Technical
delivery conditions for non-alloy structural steels
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 5577
and EN 1330-4 apply.
4 Manufacture
4.1 Steel
Blocks shall be manufactured from steel grade S355J0, specified in EN 10025-
2, or from steel of an equivalent grade.
4.2 Dimensions
The dimensions of calibration block No. 1 shall be as shown in Figure 1.
Get QUOTATION in 1-minute: Click GB/T 19799.1-2015
Historical versions: GB/T 19799.1-2015
Preview True-PDF (Reload/Scroll if blank)
GB/T 19799.1-2015: Non-destructive testing -- Ultrasonic testing -- Specification for calibration block No.1
GB/T 19799.1-2015
GB
NATIONAL STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 19.100;25.160.40
J 04
GB/T 19799.1-2015 / ISO 2400.2012
Replacing GB/T 19799.1-2015
Non-destructive testing - Ultrasonic testing -
Specification for calibration block No. 1
(ISO 2400.2012, IDT)
ISSUED ON. OCTOBER 9, 2015
IMPLEMENTED ON. JUNE 1, 2016
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration Committee.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative references ... 5
3 Terms and definitions ... 5
4 Manufacture ... 5
5 Velocities ... 8
6 Marking ... 9
7 Declaration of conformity ... 9
8 Possible modifications to block No. 1 ... 9
9 Existing blocks ... 11
Annex A (Normative) Determination of velocities ... 12
Foreword
This Part was drafted in accordance with the rules given in GB/T 1.1-2009.
This Part replaces GB/T 19799.1-2005 Non-destructive testing - Ultrasonic
testing - Calibration block No.1.
Compared with GB/T 19799.1-2005, this Part makes the following main
modifications.
- modified the scope (see Clause 1 of this edition; Clause 1 of Edition 2005);
- added normative references (see Clause 2 of this edition);
- added terms and definitions (see Clause 3 of this edition);
- modified material (see 4.1 of this edition; 2.1 of Edition 2005);
- modified dimensions (see 4.2 of this edition; 2.2 of Edition 2005);
- added machining, heat treatment and surface finish (see 4.3 of this
edition);
- added reference marks (see 4.4 of this edition);
- added requirements for velocities (see Clause 5 of this edition);
- added marking (see Clause 6 of this edition);
- added declaration of conformity (see Clause 7 of this edition);
- added possible modifications to block No. 1 (see Clause 8 of this edition);
- added existing blocks (see Clause 9 of this edition);
- added normative annex “Determination of velocities” (see Annex A).
This Part uses translation method and identically uses ISO 2400.2012 Non-
destructive testing - Ultrasonic testing - Specification for calibration block No. 1
(English version).
The Chinese document which has consistency with the international normative
reference in this Part is as follows.
- GB/T 12604.1-2005 Non-destructive testing - Terminology - Terms used
in ultrasonic testing (ISO 5577.2000, IDT)
This Part was proposed by and shall be under jurisdiction of National Technical
Committee on Non-destructive Testing of Standardization Administration of
China (SAC/TC 56).
The drafting organizations of this Part. Shanghai Materials Research Institute,
Shandong Ruixiang Mold Co., Ltd. (Shandong Jining Mold Factory), Wujiang
Hongda Flaw Detection Equipment Co., Ltd., Luoyang LYC Bearing Co., Ltd.,
Shanghai COSCO Kawasaki Heavy Industries Steel Structure Co., Ltd.,
Shanghai Jianke Inspection Co., Ltd., Shanghai Heavy Machinery Factory Co.,
Ltd., Dehua Material Testing Co., Ltd.
Main drafters of this Part. Xi Lifeng, Ding Jie, Jiang Wei, Jin Yufei, Wei Zhongrui,
Chen Cuili, Shen Mingkui, Tian Ruibin, Fan Weidong, Yin Fei, Cai Xiao, Xu
Hong, Xia Weilin, Hua Ruxi.
Version of standard substituted by this Standard is.
- GB/T 19799.1-2005.
Non-destructive testing - Ultrasonic testing -
Specification for calibration block No. 1
1 Scope
This Part of GB/T 19799 specifies requirements for the dimensions, material
and manufacture of a steel block for calibrating ultrasonic test equipment used
in manual testing.
2 Normative references
The following referenced documents are indispensable for the application of
this document. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any
amendments) applies.
ISO 5577, Non-destructive testing - Ultrasonic inspection - Vocabulary
EN 1330-4, Non-destructive testing - Terminology - Part 4. Terms used in
ultrasonic testing
EN 10025-2, Hot rolled products of structural steels - Part 2. Technical
delivery conditions for non-alloy structural steels
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 5577
and EN 1330-4 apply.
4 Manufacture
4.1 Steel
Blocks shall be manufactured from steel grade S355J0, specified in EN 10025-
2, or from steel of an equivalent grade.
4.2 Dimensions
The dimensions of calibration block No. 1 shall be as shown in Figure 1.
Share




