Passer aux informations produits
1 de 5

PayPal, credit cards. Download editable-PDF & invoice in 1 second!

GB/T 11413-2015 English PDF (GBT11413-2015)

GB/T 11413-2015 English PDF (GBT11413-2015)

Prix habituel $70.00 USD
Prix habituel Prix promotionnel $70.00 USD
Promotion Épuisé
Frais d'expédition calculés à l'étape de paiement.
Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click GB/T 11413-2015
Historical versions: GB/T 11413-2015
Preview True-PDF (Reload/Scroll if blank)

GB/T 11413-2015: Test method for bond strength of leather shoes heels
GB/T 11413-2015
GB
NATIONAL STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 61.060
Y 78
Replacing GB/T 11413-2005
Test method for bond strength of leather shoes heels
ISSUED ON. SEPTEMBER 11, 2015
IMPLEMENTED ON. APRIL 1, 2016
Issued by. General Administration of Quality Supervision, Inspection
and Quarantine;
Standardization Administration Committee.
Table of Contents
Foreword ... 3 
1 Scope ... 4 
2 Normative references ... 4 
3 Principle... 4 
4 Test equipment ... 4 
5 Sample and environmental regulation ... 7 
6 Test conditions ... 8 
7 Test steps ... 8 
8 Test results ... 9 
9 Test report ... 9 
Foreword
This Standard was drafted in accordance with the rules given in GB/T
1.1-2009.
This Standard replaces GB/T 11413-2005 Test methods for bond strength of
leather shoes heels. Compared with GB/T 11413-2005, the main
modifications are as follows.
- added GB/T 16825.1-2008 Verification of static uniaxial testing
machines - Part 1. Tension/compression testing machines - Verification
and calibration of the force-measuring system in normative references;
- added two forms of pull fixtures for different heel forms;
- described some actual situations in the test results.
Attention is drawn to the possibility that some of the elements of this Standard
may be the subject of patent rights. The issuing authority shall not be held
responsible for identifying any or all such patent rights.
This Standard was proposed by China Light Industry Federation.
This Standard shall be under the jurisdiction of Sub-committee on Leather
Shoes, National Technical Committee on Footwear of Standardization
Administration of China (SAC/TC305/SC1).
The drafting organizations of this Standard. Wenzhou Quality and Technical
Supervision and Inspection Institute [National Footwear Quality Supervision
and Inspection Center (Wenzhou)], China Leather and Footwear Industry
Research Institute, Zhejiang Red Dragonfly Footwear Company Limited,
Wenzhou Haibin Xiu Long Shoes Co., Ltd.
Main drafters of this Standard. Ye Zhengmao, Yang Zhimin, Yu Shuxian,
Shang Yuanjun, Zhang Xiulong, Mao Xiaohui, Pan Wenwen.
Versions of standard substituted by this Standard are.
- GB/T 11413-1989, GB/T 11413-2005.
Test method for bond strength of leather shoes heels
1 Scope
This Standard specifies the test method for the bond force of the heel and the
posterior or outer soles.
This Standard is applicable to heel and heel lasting or shoes adhesive or
stapled with outsole.
This Standard is not applicable to leather shoes of which the heel is
integrated with the outsole.
2 Normative references
The following referenced documents are indispensable for the application of
this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including
any amendments) applies.
GB/T 16825.1-2008, Verification of static uniaxial testing machines - Part 1.
Tension/compression testing machines - Verification and calibration of the
force-measuring system
3 Principle
Put the finished shoes on a special fixture. Stretch to the heel and posterior or
outsole for separation on the tensile testing machine at a certain speed. The
required force shall be bond strength of leather shoes heels.
4 Test equipment
4.1 Tensile testing machine
4.1.1 Tensile testing machine shall meet the requirements of GB/T
16825.1-2008. The maximum load shall not be less than 1500 N.
4.1.2 The precision is grade 2.
4.1.3 The stretching speed can be adjusted to (25 ± 2) mm/min.
lasting or outsole. Stop immediately and record the maximum load.
7.7 During the test, if the upper is torn or the heel is separated and the
insole is pulled out, if the heel is not separated from the heel lasting or outsole,
it shall terminate the test and record the maximum load.
7.8 During the test, if it reaches to the maximum load of the testing machine
due to excessive bond strength of heel but the heel is still not separated from
the heel lasting or outsole, it shall terminate the test and record the maximum
load.
7.9 During the test, if the heel is broken or fractured, the heel is not
separated from the heel lasting or outsole, it shall terminate the test and
record the maximum load.
7.10 If it only measures whether the heel bond strength meets the specified
value requirements, then when the load value reaches the product standard
value, it shall check whether the heel is separated from the heel lasting or
outsole after the load is maintained for 15s ~ 20s.
7.11 The other samples shall be carried out in the same method.
8 Test results
8.1 Take the maximum load recorded during the test as the test results, in
Newtons (N). The test results shall be neatest to 5N.
8.2 During the test, if the heel is not separated from the heel lasting or
outsole after there is situation described in 7.7, 7.8, 7.9 or 7.10 test, it shall
take the maximum load recorded as the test results and indicate
“unseparated” as well as the corresponding situation.
8.3 The test results for each shoe shall be expressed separately.
9 Test report
The test report shall contain the following information.
a) reference to this test method;
b) descriptions on test specimen name, heel height, fixture type, heel
material, heel assembly form (adhesive or stapling), heel separation;
c) heel bond strength;
d) tester and test date.

Afficher tous les détails