Passer aux informations produits
1 de 9

PayPal, credit cards. Download editable-PDF and invoice in 1 second!

GB 39731-2020 English PDF (GB39731-2020)

GB 39731-2020 English PDF (GB39731-2020)

Prix habituel $230.00 USD
Prix habituel Prix promotionnel $230.00 USD
Promotion Épuisé
Frais d'expédition calculés à l'étape de paiement.
Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click GB 39731-2020
Historical versions: GB 39731-2020
Preview True-PDF (Reload/Scroll if blank)

GB 39731-2020: Discharge standard of water pollutants for electronic industry
GB 39731-2020
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS
Discharge standard of water pollutants for electronic
industry
ISSUED ON. DECEMBER 08, 2020
IMPLEMENTED ON. JULY 01, 2021
Issued by. Ministry of Ecological Environment;
State Administration for Market Regulation.
Table of Contents
Foreword... 3
1 Scope... 5
2 Normative references... 5
3 Terms and definitions... 9
4 Water pollutant discharge control requirements... 12
5 Requirements for water pollutant monitoring... 16
6 Standardization requirements for sewage outlets... 21
7 Implementation and supervision... 21
Appendix A (Normative) Scope of products covered by special electronic materials 22
Foreword
This standard is formulated, to implement the Environmental Protection Law of the
People's Republic of China, the Water Pollution Prevention and Control Law of the
People's Republic of China, the Marine Environmental Protection Law of the People's
Republic of China and other laws and regulations; to prevent and control environmental
pollution, improve environmental quality, promote technological progress and
sustainable development of the electronics industry.
This standard specifies the water pollutant discharge control requirements, monitoring
requirements, supervision and management requirements for electronic industrial
enterprises, production facilities or research and development lines. The water pollutant
discharge management of centralized wastewater treatment facilities in the electronics
industry is also applicable to this standard.
The discharge of atmospheric pollutants (including odorous pollutants) and
environmental noise from electronic industrial enterprises, production facilities or
research and development lines, centralized wastewater treatment facilities in the
electronics industry shall be subject to the corresponding national pollutant discharge
standards; the identification, treatment, disposal of solid wastes shall be subject to the
corresponding national standards on solid waste pollution control.
This standard is published for the first time.
For the new electronic industrial enterprises from July 1, 2021, and the existing
enterprises from January 1, 2024, the water pollutant discharge control shall be
implemented in accordance with the provisions of this standard; the relevant provisions
of the Integrated wastewater discharge standard (GB 8978-1996) and the Discharge
standard of pollutants for electroplating (GB 21900-2008) shall no longer be
implemented. Local governments may implement this standard in advance with the
approval of local provincial people's governments, according to local ecological and
environmental protection needs and economic and technical conditions.
This standard is the basic requirement for the control of water pollutant discharges from
the electronics industry. Provincial people's governments may formulate local pollutant
discharge standards for items not specified in this standard; for items already specified
in this standard, they may formulate local pollutant discharge standards that are stricter
than this standard.
This standard was formulated under the organization by the Water Ecology and
Environment Department and the Regulations and Standards Department of the
Ministry of Ecology and Environment.
The main drafting organizations of this standard. China Electronics Engineering Design
Institute Co., Ltd., Environmental Standards Institute of the Ministry of Ecology and
Discharge standard of water pollutants for electronic
industry
1 Scope
This standard specifies the requirements for water pollutant discharge control,
monitoring, supervisory management for the electronics industry.
This standard applies to the management of water pollutant discharge from existing
electronic industrial enterprises, production facilities or research and development lines,
as well as the environmental impact assessment, environmental protection facility
design, completion environmental protection acceptance, issuance of pollutant
discharge permits, water pollutant discharge management after the electronic industrial
construction projects are put into operation.
The management of water pollutant discharge from centralized wastewater treatment
facilities in the electronic industry is applicable to this standard.
The water pollutant discharge control requirements specified in this standard apply to
the behavior of electronic industrial enterprises and centralized wastewater treatment
facilities in the electronic industry directly or indirectly discharging water pollutants
outside their legal boundaries.
2 Normative references
The content of this standard refers to the following documents or clauses therein. For
all referenced documents without a year, the latest version applies to this standard.
GB 6920 Water quality - Determination of pH value - Glass electrode method
GB 7466 Water quality - Determination of total chromium - Potassium
permanganate oxidation-diphenylcarbohydrazide spectrophotometric method
GB 7467 Water quality - Determination of chromium (6) - 1.5
Diphenylcarbahydrazide spectrophotometric method
GB 7470 Water quality - Determination of lead - Spectrophotometric method with
dithizone
GB 7471 Water quality - Determination of cadmium - Spectrophotometric method
with dithizone
boards and flexible boards, which can be divided into single-sided printed circuit
boards, double-sided printed circuit boards, multi-layer printed circuit boards, rigid-
flexible printed circuit boards, high-density interconnector (HDI) printed circuit
boards.
3.5 Semiconductor device
Electronic devices with specific functions, which are manufactured using the special
electrical properties of semiconductor materials. It includes two major categories of
products. discrete devices and integrated circuits.
3.6 Display device
Device that presents information for visual perception based on electronic means. It
includes thin film transistor liquid crystal display devices, low-temperature
polycrystalline silicon thin film transistor liquid crystal display devices, organic
light-emitting diode display devices, vacuum fluorescent display devices, field
discharge display devices, plasma display devices, curved display devices, flexible
display devices.
3.7 Photoelectronic device
Various functional devices made using the semiconductor light-electron (or electric-
photon) conversion effect. It includes light-emitting diodes; photoelectric converters
and photodetectors in semiconductor optoelectronic devices; gas laser devices,
semiconductor laser devices, solid-state laser devices, electrostatic induction
devices in laser devices; optical communication circuits and other devices;
semiconductor lighting devices, etc.
3.8 Electronic terminal product
Electronic products or components with independent application functions, which
are assembled based on printed circuit board assembly technology. It includes
communication equipment, radar equipment, radio and television equipment,
electronic computers, audio-visual equipment, etc.
3.9 Existing facility
Electronic industrial enterprises, production facilities or research and development
lines that have been completed and put into production or whose environmental
impact assessment documents have been approved before the implementation of this
standard, as well as centralized sewage treatment facilities for the electronic industry.
3.10 New faci...
Afficher tous les détails