PayPal, credit cards. Download editable-PDF & invoice in 1 second!
GB/T 4652-2021 English PDF (GBT4652-2021)
GB/T 4652-2021 English PDF (GBT4652-2021)
Precio habitual
$230.00 USD
Precio habitual
Precio de oferta
$230.00 USD
Precio unitario
/
por
Los gastos de envío se calculan en la pantalla de pago.
No se pudo cargar la disponibilidad de retiro
Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click GB/T 4652-2021
Historical versions: GB/T 4652-2021
Preview True-PDF (Reload/Scroll if blank)
GB/T 4652-2021: Loader for underground mining -- Testing method
GB/T 4652-2021
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 73.100.10
CCS D 92
Replacing GB/T 4652-2003
Loader for Underground Mining - Testing Method
ISSUED ON: OCTOBER 11, 2021
IMPLEMENTED ON: MAY 1, 2022
Issued by: State Administration for Market Regulation;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative References ... 4
3 Terms and Definitions ... 5
4 Test Conditions and Preparation before Test ... 5
5 Performance Parameter Test of Complete Machine ... 7
6 Load Test ... 14
7 Industrial Test ... 14
8 Test Result ... 17
Loader for Underground Mining - Testing Method
1 Scope
This document specifies the test content and test method of rock loader and loader for
underground mining, including the performance parameter test of complete machine, load test
and industrial test, etc.
This document is applicable to the exit-factory test, type test and industrial test of the following
rock loaders and loaders for underground mining (collectively referred to as “the loaders”):
---rail wheel bucket rock loader;
---wheeled bucket rock loader;
---crawler bucket rock loader;
---underground loader-digger;
---shovel loader;
---vertical claw loader;
---crawler double-arm (crab claw) loader.
This document is not applicable to scraper loader, loader conveyor and carry-scraper for
underground mining.
2 Normative References
Through the normative references in this text, the contents of the following documents
constitute indispensable clauses of this document. In terms of references with a specified date,
only versions with a specified date are applicable to this document. In terms of references
without a specified date, the latest version (including all the modifications) is applicable to this
document.
GB/T 6375 Earth-moving Machinery - Method of Test for the Measurement of Drawbar Pull
GB/T 8419 Earth-moving Machinery - Laboratory Evaluation of Operator Seat Vibration
GB/T 8499 Earth-moving Machinery Method for Locating the Center of Gravity
GB/T 8591 Earth-moving Machinery - Seat Index Point
GB/T 10913 Steel Roller Chains, Types S and C, Attachments and Sprockets
GB 16710 Earth-moving Machinery - Noise Limits
GB/T 21935 Earth-moving Machinery - Zones of Comfort and Reach for Controls
3 Terms and Definitions
The following terms and definitions are applicable to this document.
3.1 Stationary State
In the stationary state, the loader has not actuated the power source, the bucket mechanism or
working mechanism (for example, shovel plate) is plated in the original state, the tail of the
transporter is placed at the lowest position, and its center line is on the same vertical plane as
the center line of the loader.
3.2 Operating State
Under the operating state, the power source is actuated, and the loader is operated under the
control of the operator.
4 Test Conditions and Preparation before Test
4.1 Requirements for Technical Preparation
In preparation before the test, the tester shall:
---check the completeness and correctness of technical documents and instruments, tools,
accessories, and spare parts;
---conduct visual inspection on the test prototype;
---check the power source to ensure that the test is performed under the rated voltage or
atmospheric pressure;
---check the no-load working capability of the test prototype;
---check the preparation of the test site, materials, and test instruments; and make
predictions.
4.2 Requirements for Preparation of Technical Documents
The test loader shall be accompanied by the following technical documents:
---design specification;
---operation instruction;
items, and the measurement accuracy shall comply with the following requirements:
---for dimensions: 1 mm;
---for mass: 1% of the test object;
---for time: 0.1 s;
---for operating force: 1 N;
---for traction force: 2% of the test object;
---for angle: 1.
4.6 Requirements for Test Safety
The test shall comply with the corresponding technical requirements of safety, and necessary
technical maintenance shall be carried out in accordance with the stipulations of the relevant
technical documents.
5 Performance Parameter Test of Complete Machine
5.1 Bucket Volume
The bucket volume shall be measured through the method of filling the bucket with dry sand.
During measurement, place the bucket at an inclination angle of 60 from the bottom of the
bucket to the horizontal plane; the dry sand shall be piled up in sharp peaks with a natural angle
of repose at each edge of the bucket mouth.
5.2 Overall Dimensions of Loader
5.2.1 The overall dimensions of the loader shall be respectively checked under the stationary
state and operating state.
5.2.2 The length and width shall be respectively measured from the most protruding point
(excluding the footrests) on the longitudinal and transverse planes of the loader.
5.2.3 The height shall be measured in accordance with the following methods:
---for the height in the stationary state, measure the distance from the highest point of the
loader body to the rail surface (for the rail wheel type) or the ground plane (for the
crawler type and wheeled type);
---for the height under the operating state, measure the distance from the highest point of
the loader body to the rail surface or the ground plane when the loader is operating.
5.3 Unloading Height
forearm and the gripper to the extreme position; the conveying trough is at the position of the
central axis of the walking, then, measure the distance between the two points of the left and
right claw tips at the maximum edge.
5.5.2 Determination of the claw height: stretch and retract the piston rod of the hydraulic
cylinder of the boom and the gripper to the limit to the highest position reached by the working
mechanism; measure the vertical distance between the claw tip and the walking support surface.
5.5.3 Determination of the claw depth: the loader is placed on a step with a height difference of
2 m in the test site; the mechanism of the conveying trough is placed at the lowest position; the
clawing mechanism is placed at the lowest position under the step; measure the vertical distance
from the claw tip to the walking reference plane on the step.
5.6 Specific Parameters of Underground Loader-digger
5.6.1 Determination of digging distance: stretch and retract the piston rod of the hydraulic
cylinder of the boom, the forearm, and the bucket to the longest position, where the boom, the
forearm and the bucket are deployed together. When the bucket falls to the walking ground,
measure the horizontal distance from the bucket tip to the conveying trough.
5.6.2 Determination of digging width: under the circumstance of 5.6.1, stretch and retract the
piston rod of the rotary hydraulic cylinder to the extreme position of the left and right deflection
of the bucket; the conveying trough is at the position of the central axis of the walking, then,
measure the distance between the outer sides of the bucket when it is at the extreme left position
and extreme right position.
5.6.3 Determination of loading width: under the circumstance of 5.6.1, stretch and retract the
piston rod of the rotary hydraulic cylinder to the extreme position of the left and right deflection
of the bucket; the conveying trough is turned left and right to the position of the maximum
turning angle, then, measu...
Get QUOTATION in 1-minute: Click GB/T 4652-2021
Historical versions: GB/T 4652-2021
Preview True-PDF (Reload/Scroll if blank)
GB/T 4652-2021: Loader for underground mining -- Testing method
GB/T 4652-2021
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 73.100.10
CCS D 92
Replacing GB/T 4652-2003
Loader for Underground Mining - Testing Method
ISSUED ON: OCTOBER 11, 2021
IMPLEMENTED ON: MAY 1, 2022
Issued by: State Administration for Market Regulation;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative References ... 4
3 Terms and Definitions ... 5
4 Test Conditions and Preparation before Test ... 5
5 Performance Parameter Test of Complete Machine ... 7
6 Load Test ... 14
7 Industrial Test ... 14
8 Test Result ... 17
Loader for Underground Mining - Testing Method
1 Scope
This document specifies the test content and test method of rock loader and loader for
underground mining, including the performance parameter test of complete machine, load test
and industrial test, etc.
This document is applicable to the exit-factory test, type test and industrial test of the following
rock loaders and loaders for underground mining (collectively referred to as “the loaders”):
---rail wheel bucket rock loader;
---wheeled bucket rock loader;
---crawler bucket rock loader;
---underground loader-digger;
---shovel loader;
---vertical claw loader;
---crawler double-arm (crab claw) loader.
This document is not applicable to scraper loader, loader conveyor and carry-scraper for
underground mining.
2 Normative References
Through the normative references in this text, the contents of the following documents
constitute indispensable clauses of this document. In terms of references with a specified date,
only versions with a specified date are applicable to this document. In terms of references
without a specified date, the latest version (including all the modifications) is applicable to this
document.
GB/T 6375 Earth-moving Machinery - Method of Test for the Measurement of Drawbar Pull
GB/T 8419 Earth-moving Machinery - Laboratory Evaluation of Operator Seat Vibration
GB/T 8499 Earth-moving Machinery Method for Locating the Center of Gravity
GB/T 8591 Earth-moving Machinery - Seat Index Point
GB/T 10913 Steel Roller Chains, Types S and C, Attachments and Sprockets
GB 16710 Earth-moving Machinery - Noise Limits
GB/T 21935 Earth-moving Machinery - Zones of Comfort and Reach for Controls
3 Terms and Definitions
The following terms and definitions are applicable to this document.
3.1 Stationary State
In the stationary state, the loader has not actuated the power source, the bucket mechanism or
working mechanism (for example, shovel plate) is plated in the original state, the tail of the
transporter is placed at the lowest position, and its center line is on the same vertical plane as
the center line of the loader.
3.2 Operating State
Under the operating state, the power source is actuated, and the loader is operated under the
control of the operator.
4 Test Conditions and Preparation before Test
4.1 Requirements for Technical Preparation
In preparation before the test, the tester shall:
---check the completeness and correctness of technical documents and instruments, tools,
accessories, and spare parts;
---conduct visual inspection on the test prototype;
---check the power source to ensure that the test is performed under the rated voltage or
atmospheric pressure;
---check the no-load working capability of the test prototype;
---check the preparation of the test site, materials, and test instruments; and make
predictions.
4.2 Requirements for Preparation of Technical Documents
The test loader shall be accompanied by the following technical documents:
---design specification;
---operation instruction;
items, and the measurement accuracy shall comply with the following requirements:
---for dimensions: 1 mm;
---for mass: 1% of the test object;
---for time: 0.1 s;
---for operating force: 1 N;
---for traction force: 2% of the test object;
---for angle: 1.
4.6 Requirements for Test Safety
The test shall comply with the corresponding technical requirements of safety, and necessary
technical maintenance shall be carried out in accordance with the stipulations of the relevant
technical documents.
5 Performance Parameter Test of Complete Machine
5.1 Bucket Volume
The bucket volume shall be measured through the method of filling the bucket with dry sand.
During measurement, place the bucket at an inclination angle of 60 from the bottom of the
bucket to the horizontal plane; the dry sand shall be piled up in sharp peaks with a natural angle
of repose at each edge of the bucket mouth.
5.2 Overall Dimensions of Loader
5.2.1 The overall dimensions of the loader shall be respectively checked under the stationary
state and operating state.
5.2.2 The length and width shall be respectively measured from the most protruding point
(excluding the footrests) on the longitudinal and transverse planes of the loader.
5.2.3 The height shall be measured in accordance with the following methods:
---for the height in the stationary state, measure the distance from the highest point of the
loader body to the rail surface (for the rail wheel type) or the ground plane (for the
crawler type and wheeled type);
---for the height under the operating state, measure the distance from the highest point of
the loader body to the rail surface or the ground plane when the loader is operating.
5.3 Unloading Height
forearm and the gripper to the extreme position; the conveying trough is at the position of the
central axis of the walking, then, measure the distance between the two points of the left and
right claw tips at the maximum edge.
5.5.2 Determination of the claw height: stretch and retract the piston rod of the hydraulic
cylinder of the boom and the gripper to the limit to the highest position reached by the working
mechanism; measure the vertical distance between the claw tip and the walking support surface.
5.5.3 Determination of the claw depth: the loader is placed on a step with a height difference of
2 m in the test site; the mechanism of the conveying trough is placed at the lowest position; the
clawing mechanism is placed at the lowest position under the step; measure the vertical distance
from the claw tip to the walking reference plane on the step.
5.6 Specific Parameters of Underground Loader-digger
5.6.1 Determination of digging distance: stretch and retract the piston rod of the hydraulic
cylinder of the boom, the forearm, and the bucket to the longest position, where the boom, the
forearm and the bucket are deployed together. When the bucket falls to the walking ground,
measure the horizontal distance from the bucket tip to the conveying trough.
5.6.2 Determination of digging width: under the circumstance of 5.6.1, stretch and retract the
piston rod of the rotary hydraulic cylinder to the extreme position of the left and right deflection
of the bucket; the conveying trough is at the position of the central axis of the walking, then,
measure the distance between the outer sides of the bucket when it is at the extreme left position
and extreme right position.
5.6.3 Determination of loading width: under the circumstance of 5.6.1, stretch and retract the
piston rod of the rotary hydraulic cylinder to the extreme position of the left and right deflection
of the bucket; the conveying trough is turned left and right to the position of the maximum
turning angle, then, measu...
Share







