PayPal, credit cards. Download editable-PDF & invoice in 1 second!
GB/T 38131-2019 English PDF (GBT38131-2019)
GB/T 38131-2019 English PDF (GBT38131-2019)
Precio habitual
$190.00 USD
Precio habitual
Precio de oferta
$190.00 USD
Precio unitario
/
por
Los gastos de envío se calculan en la pantalla de pago.
No se pudo cargar la disponibilidad de retiro
Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click GB/T 38131-2019
Historical versions: GB/T 38131-2019
Preview True-PDF (Reload/Scroll if blank)
GB/T 38131-2019: Acquisition method of datum points for clothing anthropometry
GB/T 38131-2019
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 61.020
Y 75
Acquisition method of datum points for clothing
anthropometry
ISSUED ON: OCTOBER 17, 2019
IMPLEMENTED ON: MAY 01, 2020
Issued by: State Administration for Market Regulation;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Terms and definitions ... 4
4 Datum points for anthropometry ... 5
5 Acquisition method ... 6
Appendix A (Normative) Dress and stance ... 21
Appendix B (Informative) Measuring principle of non-contact anthropometer 22
Acquisition method of datum points for clothing
anthropometry
1 Scope
This Standard specifies the terms and definitions, content and acquisition
method of datum points for clothing anthropometry.
This Standard applies to adult clothing anthropometry.
2 Normative references
The following documents are indispensable for the application of this document.
For dated references, only the dated version applies to this document. For
undated references, the latest edition (including all amendments) applies to this
document.
GB/T 5703, Basic human body measurements for technological design
GB/T 16160, Anthropometric definitions and methods for garment
3 Terms and definitions
Terms and definitions determined by GB/T 5703 and GB/T 16160, and the
following ones are applicable to this document.
3.1 Datum point
The point of measurement that is used during anthropometry.
3.2 Bust width point/chest width point
The outermost point of the vertical tangent point on the front of the human
armhole circumference.
3.3 Back width point
The outermost point on the back of the human armhole circumference.
3.4 Waist line
The line of a circle at the thinnest part of the waist between the lower edge of
the human rib and the upper end of the tibia.
o) lateral buttock;
p) wrist point;
q) perineum point;
r) outer ankle point.
5 Acquisition method
5.1 Requirements
5.1.1 Dress and stance
The dress requirements between manual measurement and non-contact
anthropometer measurement are the same; the stances vary depending on the
difference of non-contact measurement equipment. Dress and stance shall
comply with the provisions of Appendix A.
5.1.2 Measurement tools
For manual measurement, tools such as anthropometer, soft ruler, and triangle
ruler shall be used.
Non-contact anthropometry shall use tools such as non-contact anthropometer.
For the measurement principle of non-contact anthropometer, see Appendix B.
5.2 Graphic of datum points for clothing anthropometry
The datum points for clothing anthropometry shall be acquired from top to
bottom, from left to right, from edge to center, and from front to back of the
human body. It mainly includes head-vertex, gnathion point, back-neck point,
side-neck point, front-neck point, shoulder point, bust width point, back width
point, bust-point, elbow point, lateral waist point, anterior waist point, posterior
waist point, buttock-peak point, lateral buttock, wrist point, perineum point, outer
ankle point (see Figure 1).
Notes:
a -- bust width point;
b -- armhole circumference.
Figure 8 -- Schematic diagram of the bust width point acquisition
method
5.10 Back width point
In the manual measurement, the subject stands at the position that is specified
by the measurer; the subject puts two feet together and stands upright; the
subject’s eyes look straight ahead; the human body maintains the standing
posture; the arm naturally hangs down; the vertical plane slowly moves to the
upper arm of the human body; the outermost point in contact with the armhole
circumference on the back is the back width point. There are two, namely left
and right, back width points. In the non-contact anthropometry, the subject is
required to stand according to the non-contact anthropometer; the acquisition
method of the back width point can refer to the manual measurement process
(see Figure 9).
Notes:
a -- back width point;
b -- armhole circumference.
Figure 9 -- Schematic diagram of the back width point acquisition
method
5.11 Bust-point
In the manual measurement, the subject stands sideways at the position that is
specified by the measurer; the subject puts two feet together and stands upright;
the subject’s eyes look straight ahead; the subject maintains the natural state;
the vertical plane slowly moves to the human chest; the outermost point in
contact with the chest is the bust-point. There are two, namely left and right,
bust-points. In the non-contact anthropometry, the subject is required to stand
Figure 11 -- Schematic diagram of the elbow point acquisition method
5.13 Lateral waist point
In the manual measurement, the subject stands sideways at the position that is
specified by the measurer; the subject puts two feet together and stands upright;
the subject's arm is naturally lifted slightly; the thinnest part between the lower
edge of the human rib and the upper end of the tibia is the waist line. The
measurer stands on the side of the subject, and determines the intersection of
the side central line and the waist line of the human body as the lateral waist
point. In the non-contact anthropometry, the subject is required to stand
according to the non-contact anthropometer; the acquisition method of the
lateral waist point can refer to the manual measurement process (see Figure
12).
Notes:
a -- lateral waist point;
b -- waist line.
Figure 12 -- Schematic diagram of the lateral waist point acquisition
method
5.14 Anterior waist point
In the manual measurement, the subject stands at the position that is specified
by the measurer. The subject puts two feet together and stands upright; the
subject's arm is naturally lifted slightly; the thinnest part between the lower edge
of the human rib and the upper end of the tibia is the waist line. The measurer
stands on the front of the subject, and determines the anterior intersection of
the median sagittal plane and the waist line of the human body as the anterior
waist point. In the non-contact anthropometry, the subject is required to stand
a -- buttock-peak point;
b -- vertical plane.
Figure 15 -- Schematic diagram of the buttock-peak point acquisition
method
5.17 Lateral buttock
In the manual measurement, the subject stands sideways at the position that is
specified by the measurer; the subject puts two feet together and stands upright;
the subject’s eyes look straight ahead; the subject maintains the natural state;
the horizontal circumference of the buttock-peak point is the hip line. Let the
subject's arm rise naturally, and the intersection of the hip coronal plane and
the hip line is determined as the lateral buttock. There are two, namely left and
right, lateral buttocks. In the non-contact anthropometry, the subject is required
to stand according to the non-contact anthropometer; the acquisition method of
the lateral buttock can refer to the manual measurement process (see Figure
16).
Notes:
a -- lateral buttock;
b -- hip line.
Figure 16 -- Schematic diagram of the lateral buttock acquisition method
5.18 Wrist point
In the manual measurement, the subject stands at the position that is specified
by the measurer; the subject puts two feet together and stands upright; the
subject’s ...
Get QUOTATION in 1-minute: Click GB/T 38131-2019
Historical versions: GB/T 38131-2019
Preview True-PDF (Reload/Scroll if blank)
GB/T 38131-2019: Acquisition method of datum points for clothing anthropometry
GB/T 38131-2019
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 61.020
Y 75
Acquisition method of datum points for clothing
anthropometry
ISSUED ON: OCTOBER 17, 2019
IMPLEMENTED ON: MAY 01, 2020
Issued by: State Administration for Market Regulation;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Terms and definitions ... 4
4 Datum points for anthropometry ... 5
5 Acquisition method ... 6
Appendix A (Normative) Dress and stance ... 21
Appendix B (Informative) Measuring principle of non-contact anthropometer 22
Acquisition method of datum points for clothing
anthropometry
1 Scope
This Standard specifies the terms and definitions, content and acquisition
method of datum points for clothing anthropometry.
This Standard applies to adult clothing anthropometry.
2 Normative references
The following documents are indispensable for the application of this document.
For dated references, only the dated version applies to this document. For
undated references, the latest edition (including all amendments) applies to this
document.
GB/T 5703, Basic human body measurements for technological design
GB/T 16160, Anthropometric definitions and methods for garment
3 Terms and definitions
Terms and definitions determined by GB/T 5703 and GB/T 16160, and the
following ones are applicable to this document.
3.1 Datum point
The point of measurement that is used during anthropometry.
3.2 Bust width point/chest width point
The outermost point of the vertical tangent point on the front of the human
armhole circumference.
3.3 Back width point
The outermost point on the back of the human armhole circumference.
3.4 Waist line
The line of a circle at the thinnest part of the waist between the lower edge of
the human rib and the upper end of the tibia.
o) lateral buttock;
p) wrist point;
q) perineum point;
r) outer ankle point.
5 Acquisition method
5.1 Requirements
5.1.1 Dress and stance
The dress requirements between manual measurement and non-contact
anthropometer measurement are the same; the stances vary depending on the
difference of non-contact measurement equipment. Dress and stance shall
comply with the provisions of Appendix A.
5.1.2 Measurement tools
For manual measurement, tools such as anthropometer, soft ruler, and triangle
ruler shall be used.
Non-contact anthropometry shall use tools such as non-contact anthropometer.
For the measurement principle of non-contact anthropometer, see Appendix B.
5.2 Graphic of datum points for clothing anthropometry
The datum points for clothing anthropometry shall be acquired from top to
bottom, from left to right, from edge to center, and from front to back of the
human body. It mainly includes head-vertex, gnathion point, back-neck point,
side-neck point, front-neck point, shoulder point, bust width point, back width
point, bust-point, elbow point, lateral waist point, anterior waist point, posterior
waist point, buttock-peak point, lateral buttock, wrist point, perineum point, outer
ankle point (see Figure 1).
Notes:
a -- bust width point;
b -- armhole circumference.
Figure 8 -- Schematic diagram of the bust width point acquisition
method
5.10 Back width point
In the manual measurement, the subject stands at the position that is specified
by the measurer; the subject puts two feet together and stands upright; the
subject’s eyes look straight ahead; the human body maintains the standing
posture; the arm naturally hangs down; the vertical plane slowly moves to the
upper arm of the human body; the outermost point in contact with the armhole
circumference on the back is the back width point. There are two, namely left
and right, back width points. In the non-contact anthropometry, the subject is
required to stand according to the non-contact anthropometer; the acquisition
method of the back width point can refer to the manual measurement process
(see Figure 9).
Notes:
a -- back width point;
b -- armhole circumference.
Figure 9 -- Schematic diagram of the back width point acquisition
method
5.11 Bust-point
In the manual measurement, the subject stands sideways at the position that is
specified by the measurer; the subject puts two feet together and stands upright;
the subject’s eyes look straight ahead; the subject maintains the natural state;
the vertical plane slowly moves to the human chest; the outermost point in
contact with the chest is the bust-point. There are two, namely left and right,
bust-points. In the non-contact anthropometry, the subject is required to stand
Figure 11 -- Schematic diagram of the elbow point acquisition method
5.13 Lateral waist point
In the manual measurement, the subject stands sideways at the position that is
specified by the measurer; the subject puts two feet together and stands upright;
the subject's arm is naturally lifted slightly; the thinnest part between the lower
edge of the human rib and the upper end of the tibia is the waist line. The
measurer stands on the side of the subject, and determines the intersection of
the side central line and the waist line of the human body as the lateral waist
point. In the non-contact anthropometry, the subject is required to stand
according to the non-contact anthropometer; the acquisition method of the
lateral waist point can refer to the manual measurement process (see Figure
12).
Notes:
a -- lateral waist point;
b -- waist line.
Figure 12 -- Schematic diagram of the lateral waist point acquisition
method
5.14 Anterior waist point
In the manual measurement, the subject stands at the position that is specified
by the measurer. The subject puts two feet together and stands upright; the
subject's arm is naturally lifted slightly; the thinnest part between the lower edge
of the human rib and the upper end of the tibia is the waist line. The measurer
stands on the front of the subject, and determines the anterior intersection of
the median sagittal plane and the waist line of the human body as the anterior
waist point. In the non-contact anthropometry, the subject is required to stand
a -- buttock-peak point;
b -- vertical plane.
Figure 15 -- Schematic diagram of the buttock-peak point acquisition
method
5.17 Lateral buttock
In the manual measurement, the subject stands sideways at the position that is
specified by the measurer; the subject puts two feet together and stands upright;
the subject’s eyes look straight ahead; the subject maintains the natural state;
the horizontal circumference of the buttock-peak point is the hip line. Let the
subject's arm rise naturally, and the intersection of the hip coronal plane and
the hip line is determined as the lateral buttock. There are two, namely left and
right, lateral buttocks. In the non-contact anthropometry, the subject is required
to stand according to the non-contact anthropometer; the acquisition method of
the lateral buttock can refer to the manual measurement process (see Figure
16).
Notes:
a -- lateral buttock;
b -- hip line.
Figure 16 -- Schematic diagram of the lateral buttock acquisition method
5.18 Wrist point
In the manual measurement, the subject stands at the position that is specified
by the measurer; the subject puts two feet together and stands upright; the
subject’s ...
Share







