PayPal, credit cards. Download editable-PDF & invoice In 1 second!
GB/T 24146-2022 English PDF (GBT24146-2022)
GB/T 24146-2022 English PDF (GBT24146-2022)
Precio habitual
$230.00 USD
Precio habitual
Precio de oferta
$230.00 USD
Precio unitario
/
por
Los gastos de envío se calculan en la pantalla de pago.
No se pudo cargar la disponibilidad de retiro
Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click GB/T 24146-2022
Historical versions: GB/T 24146-2022
Preview True-PDF (Reload/Scroll if blank)
GB/T 24146-2022: Rubber hoses and hose assemblies for use in oil burners - Specification
GB/T 24146-2022
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 83.140.40
CCS G 42
GB/T 24146-2022 / ISO 6806:2017
Replacing GB/T 24146-2009
Rubber hoses and hose assemblies for use in oil burners -
Specification
(ISO 6806:2017, IDT)
ISSUED ON: MARCH 09, 2022
IMPLEMENTED ON: OCTOBER 01, 2022
Issued by: State Administration for Market Regulation;
Standardization Administration of the People's Republic of China.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative references ... 5
3 Terms and definitions... 6
4 Construction ... 6
5 Dimensions and tolerances ... 7
6 Physical properties requirements for inner lining and outer cover ... 8
7 Physical properties requirements for hoses and hose assemblies ... 8
8 Test frequency ... 9
9 Type test ... 10
10 Marking ... 10
Annex A (normative) Test frequency ... 11
Annex B (informative) Production tests ... 12
Annex C (normative) Determination of oil swell ... 13
Annex D (normative) Determination of external pressure resistance ... 14
Annex E (normative) Determination of flammability ... 16
Annex F (normative) Pressure pulse test ... 18
Bibliography... 19
Rubber hoses and hose assemblies for use in oil burners -
Specification
1 Scope
This Standard specifies the requirements for rubber hoses and hose assemblies for use
in oil burners.
This Standard specifies the following two types of hose assemblies:
- Type 1: Hose assemblies for outflow and return instead of fitting between oil burner
pump and atomizing connection. The maximum working pressure is 1.0MPa. The
maximum oil temperature is 100°C;
- Type 2: Hose assemblies installed between oil burner pump and atomizing
connection. The working pressure is 4.0MPa. The maximum oil temperature is
100°C.
For applications other than oil burners, the hose assemblies specified in this document
have not been specifically evaluated and shall not be used.
2 Normative references
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
GB/T 5565.2-2017, Rubber and plastics hoses and tubing - Measurement of
flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO
10619-2:2011, IDT)
ISO 48, Rubber, vulcanized or thermoplastic - Determination of hardness - Part 2:
Hardness between 10 IRHD and 100 IRHD
NOTE: GB/T 6031-2017, Rubber, vulcanized or thermoplastic - Determination of hardness
(hardness between 10 IRHD and 100 IRHD) (ISO 48:2010, IDT)
ISO 1307, Rubber and plastics hoses - Hose sizes, minimum and maximum inside
diameters, and tolerances on cut-to-length hoses
NOTE: GB/T 9575-2013, Rubber and plastics hoses - Hose sizes, minimum and maximum
inside diameters, and tolerances on cut-to-length hoses (ISO 1307:2006, IDT)
ISO 1402, Rubber and plastics hoses and hose assemblies - Hydrostatic testing
NOTE: GB/T 5563-2013, Rubber and Plastics Hoses and Hose Assemblies - Hydrostatic Testing
(ISO 1402:2009, IDT)
ISO 1436, Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic
types for oil-based or water-based fluids - Specification
NOTE: GB/T 3683-2011, Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic
types for oil-based or water-based fluids - Specification (ISO 1436:2009, IDT)
ISO 1817, Rubber, vulcanized or thermoplastic - Determination of the effect of
liquids
NOTE: GB/T 1690-2010, Rubber, vulcanized or thermoplastic - Determination of the effect of
liquids (ISO 1817:2005, MOD)
ISO 4671, Rubber and plastics hoses and hose assemblies - Methods of measurement
of the dimensions of hoses and the lengths of hose assemblies
NOTE: GB/T 9573-2013, Rubber and plastics hoses and hose assemblies - Methods of
measurement of the dimensions of hoses and the lengths of hose assemblies (ISO 4671:2007,
IDT)
ISO 7326, Rubber and plastics hoses - Assessment of ozone resistance under static
conditions
NOTE: GB/T 24134-2009, Rubber and plastics hoses - Assessment of ozone resistance under
static conditions (ISO 7326:2006, IDT)
ISO 8330, Rubber and plastics hoses and hose assemblies - Vocabulary
NOTE: GB/T 7528-2019, Rubber and plastics hoses and hose assemblies -Vocabulary (ISO
8330:2014, IDT)
3 Terms and definitions
For the purposes of this document, the terms and definitions defined in ISO 8330 apply.
4 Construction
Hoses conforming to this document shall be constructed of one of the following two:
a) Internal smooth rubber inner lining and external corrosion resistant metal braid;
b) Internal smooth rubber inner lining, reinforcement layer consisting of a textile or
corrosion-resistant metal braid and rubber outer covering.
When tested in accordance with ISO 1402, the hose assembly shall not leak or fail until
the minimum burst pressure given in Table 4 is reached.
7.2 Oil swell
When tested according to the method specified in Annex C, the reduction in the inner
diameter of the hose shall not exceed 10%.
7.3 External pressure test
When tested according to the method specified in Annex D, the reduction in the outer
diameter of the hose shall not exceed 6%.
7.4 Low-temperature flexibility
After the test is carried out according to Method B in GB/T 5565.2-2017 at a
temperature of (-40±2)℃, and when the verification pressure test is carried out
according to 7.1, the hose shall not crack or leak.
7.5 Flammability
When tested according to the method specified in Annex E, the hose shall not leak.
7.6 Ozone resistance (outer cover only)
When tested according to ISO 7326, there shall be no cracking.
7.7 Impulse test
When tested according to the method specified in Annex F, there shall be no leakage or
damage after completing 30,000 pulses.
8 Test frequency
The minimum test frequency shall comply with the arrangements given in Annex A.
Type test is a test performed to verify that the hose meets all the requirements of this
document.
Routine tests are performed on each hose or finished hose.
Production tests are the tests performed per batch (see the arrangements given in Annex
B, which are for guidance only).
9 Type test
Type test is a test performed to confirm that the manufacturing method and hose design
meet all the material, construction and testing requirements of this document.
Type test shall be carried out at least every 5 years, or when the manufacturing method
or material changes.
Type test shall be carried out on all sizes, all classes and types, except those of the same
size and construction.
10 Marking
Hose assemblies complying with the requirements of this document shall be marked
with the following:
a) Reference to this document;
b) Nominal inner diameter specification;
c) Type;
d) Manufacturer's logo or mark;
e) Season and year of manufacture.
Example: GB/T 24146-10-type 2-MAN-2Q21
NOTE: Hoses (for example: metal braids) can be marked with metal identification plates.
Get QUOTATION in 1-minute: Click GB/T 24146-2022
Historical versions: GB/T 24146-2022
Preview True-PDF (Reload/Scroll if blank)
GB/T 24146-2022: Rubber hoses and hose assemblies for use in oil burners - Specification
GB/T 24146-2022
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 83.140.40
CCS G 42
GB/T 24146-2022 / ISO 6806:2017
Replacing GB/T 24146-2009
Rubber hoses and hose assemblies for use in oil burners -
Specification
(ISO 6806:2017, IDT)
ISSUED ON: MARCH 09, 2022
IMPLEMENTED ON: OCTOBER 01, 2022
Issued by: State Administration for Market Regulation;
Standardization Administration of the People's Republic of China.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative references ... 5
3 Terms and definitions... 6
4 Construction ... 6
5 Dimensions and tolerances ... 7
6 Physical properties requirements for inner lining and outer cover ... 8
7 Physical properties requirements for hoses and hose assemblies ... 8
8 Test frequency ... 9
9 Type test ... 10
10 Marking ... 10
Annex A (normative) Test frequency ... 11
Annex B (informative) Production tests ... 12
Annex C (normative) Determination of oil swell ... 13
Annex D (normative) Determination of external pressure resistance ... 14
Annex E (normative) Determination of flammability ... 16
Annex F (normative) Pressure pulse test ... 18
Bibliography... 19
Rubber hoses and hose assemblies for use in oil burners -
Specification
1 Scope
This Standard specifies the requirements for rubber hoses and hose assemblies for use
in oil burners.
This Standard specifies the following two types of hose assemblies:
- Type 1: Hose assemblies for outflow and return instead of fitting between oil burner
pump and atomizing connection. The maximum working pressure is 1.0MPa. The
maximum oil temperature is 100°C;
- Type 2: Hose assemblies installed between oil burner pump and atomizing
connection. The working pressure is 4.0MPa. The maximum oil temperature is
100°C.
For applications other than oil burners, the hose assemblies specified in this document
have not been specifically evaluated and shall not be used.
2 Normative references
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
GB/T 5565.2-2017, Rubber and plastics hoses and tubing - Measurement of
flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO
10619-2:2011, IDT)
ISO 48, Rubber, vulcanized or thermoplastic - Determination of hardness - Part 2:
Hardness between 10 IRHD and 100 IRHD
NOTE: GB/T 6031-2017, Rubber, vulcanized or thermoplastic - Determination of hardness
(hardness between 10 IRHD and 100 IRHD) (ISO 48:2010, IDT)
ISO 1307, Rubber and plastics hoses - Hose sizes, minimum and maximum inside
diameters, and tolerances on cut-to-length hoses
NOTE: GB/T 9575-2013, Rubber and plastics hoses - Hose sizes, minimum and maximum
inside diameters, and tolerances on cut-to-length hoses (ISO 1307:2006, IDT)
ISO 1402, Rubber and plastics hoses and hose assemblies - Hydrostatic testing
NOTE: GB/T 5563-2013, Rubber and Plastics Hoses and Hose Assemblies - Hydrostatic Testing
(ISO 1402:2009, IDT)
ISO 1436, Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic
types for oil-based or water-based fluids - Specification
NOTE: GB/T 3683-2011, Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic
types for oil-based or water-based fluids - Specification (ISO 1436:2009, IDT)
ISO 1817, Rubber, vulcanized or thermoplastic - Determination of the effect of
liquids
NOTE: GB/T 1690-2010, Rubber, vulcanized or thermoplastic - Determination of the effect of
liquids (ISO 1817:2005, MOD)
ISO 4671, Rubber and plastics hoses and hose assemblies - Methods of measurement
of the dimensions of hoses and the lengths of hose assemblies
NOTE: GB/T 9573-2013, Rubber and plastics hoses and hose assemblies - Methods of
measurement of the dimensions of hoses and the lengths of hose assemblies (ISO 4671:2007,
IDT)
ISO 7326, Rubber and plastics hoses - Assessment of ozone resistance under static
conditions
NOTE: GB/T 24134-2009, Rubber and plastics hoses - Assessment of ozone resistance under
static conditions (ISO 7326:2006, IDT)
ISO 8330, Rubber and plastics hoses and hose assemblies - Vocabulary
NOTE: GB/T 7528-2019, Rubber and plastics hoses and hose assemblies -Vocabulary (ISO
8330:2014, IDT)
3 Terms and definitions
For the purposes of this document, the terms and definitions defined in ISO 8330 apply.
4 Construction
Hoses conforming to this document shall be constructed of one of the following two:
a) Internal smooth rubber inner lining and external corrosion resistant metal braid;
b) Internal smooth rubber inner lining, reinforcement layer consisting of a textile or
corrosion-resistant metal braid and rubber outer covering.
When tested in accordance with ISO 1402, the hose assembly shall not leak or fail until
the minimum burst pressure given in Table 4 is reached.
7.2 Oil swell
When tested according to the method specified in Annex C, the reduction in the inner
diameter of the hose shall not exceed 10%.
7.3 External pressure test
When tested according to the method specified in Annex D, the reduction in the outer
diameter of the hose shall not exceed 6%.
7.4 Low-temperature flexibility
After the test is carried out according to Method B in GB/T 5565.2-2017 at a
temperature of (-40±2)℃, and when the verification pressure test is carried out
according to 7.1, the hose shall not crack or leak.
7.5 Flammability
When tested according to the method specified in Annex E, the hose shall not leak.
7.6 Ozone resistance (outer cover only)
When tested according to ISO 7326, there shall be no cracking.
7.7 Impulse test
When tested according to the method specified in Annex F, there shall be no leakage or
damage after completing 30,000 pulses.
8 Test frequency
The minimum test frequency shall comply with the arrangements given in Annex A.
Type test is a test performed to verify that the hose meets all the requirements of this
document.
Routine tests are performed on each hose or finished hose.
Production tests are the tests performed per batch (see the arrangements given in Annex
B, which are for guidance only).
9 Type test
Type test is a test performed to confirm that the manufacturing method and hose design
meet all the material, construction and testing requirements of this document.
Type test shall be carried out at least every 5 years, or when the manufacturing method
or material changes.
Type test shall be carried out on all sizes, all classes and types, except those of the same
size and construction.
10 Marking
Hose assemblies complying with the requirements of this document shall be marked
with the following:
a) Reference to this document;
b) Nominal inner diameter specification;
c) Type;
d) Manufacturer's logo or mark;
e) Season and year of manufacture.
Example: GB/T 24146-10-type 2-MAN-2Q21
NOTE: Hoses (for example: metal braids) can be marked with metal identification plates.
Share





