Ir directamente a la información del producto
1 de 12

PayPal, credit cards. Download editable-PDF and invoice in 1 second!

GB/T 19754-2021 English PDF (GBT19754-2021)

GB/T 19754-2021 English PDF (GBT19754-2021)

Precio habitual $380.00 USD
Precio habitual Precio de oferta $380.00 USD
Oferta Agotado
Los gastos de envío se calculan en la pantalla de pago.
Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click GB/T 19754-2021
Historical versions: GB/T 19754-2021
Preview True-PDF (Reload/Scroll if blank)

GB/T 19754-2021: Test methods for energy consumption of heavy-duty hybrid electric vehicles
GB/T 19754-2021
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 43.020
CCS T 47
Replacing 19754-2015
Test Methods for Energy Consumption of Heavy-duty
Hybrid Electric Vehicles
ISSUED ON: OCTOBER 11, 2021
IMPLEMENTED ON: MAY 1, 2022
Issued by: State Administration for Market Regulation;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword ... 4 
1 Scope ... 7 
2 Normative References ... 7 
3 Terms and Definitions ... 8 
4 Calculation Method for Net Energy Change (NEC) ... 8 
4.1 General Requirements ... 8 
4.2 Determination of NEC ... 8 
4.3 Determination of Relative Change of NEC ... 9 
5 Test Cycle ... 10 
6 Test Preparation ... 10 
6.1 Test conditions ... 10 
6.2 Pre-collection of Vehicle Data ... 10 
6.3 Vehicle Conditions ... 11 
6.4 Failure of REESS ... 13 
6.5 Measurement of Sliding Resistance and Technical Conditions of Chassis
Dynamometer ... 14 
6.6 Test Equipment ... 14 
7 Test Procedure ... 15 
7.1 Start-up and Pre-operation of Vehicle Drive System ... 15 
7.2 Test Process ... 15 
7.3 Test Procedure of Non-External Rechargeable Hybrid Electric Vehicle (NOVC-
HEV) ... 17 
7.4 Test Procedure of External Rechargeable Hybrid Electric Vehicle (OVC-HEV)
... 17 
8 Data Records and Results ... 22 
8.1 Environmental Data ... 22 
8.2 Fuel Density ... 22 
8.3 SOC, Power Battery Voltage and Super Capacitor Voltage ... 22 
8.4 Traveled Distance... 22 
8.5 Fuel Consumption ... 22 
8.6 NEC Calculation ... 22 
8.7 Test Results ... 22 
8.8 CO2 Emission ... 29 
9 Test Report ... 30 
Appendix A (Informative) Example of Determination Procedure of Relative
Change of NEC and SOC Correction Procedure ... 31 
Appendix B (Normative) Table of Parameters of Sample Vehicle ... 33 
Appendix C (Normative) OVC-HEV Pure Electricity Utilization Factor (UF) ... 37 
Appendix D (Informative) Converted Fuel Consumption ... 39 
Bibliography ... 41 
Test Methods for Energy Consumption of Heavy-duty
Hybrid Electric Vehicles
1 Scope
This document specifies the test methods for the energy consumption test of heavy-
duty hybrid electric vehicles on a chassis dynamometer.
This document is applicable to hybrid electric vehicles with a maximum total mass of
more than 3,500 kg, including trucks, semi-trailer tractors, passenger vehicles, dump
trucks and city buses. Concrete mixer trucks may refer to the relevant measurement
methods of dump trucks; other special-purpose transport vehicles may refer to the
relevant measurement methods of trucks.
This document is applicable to vehicles that run on gasoline or diesel. Other fuel types
of vehicles may take this document as a reference.
This document does not apply to special-purpose operating vehicles, including van-
type special-purpose operating vehicles, tank-type special-purpose operating vehicles,
special-purpose dump trucks, silo-type special-purpose operating vehicles, special-
purpose vehicles for hoisting and lifting, as well as special-purpose operating vehicles
with special structures, etc.
2 Normative References
The contents of the following documents constitute indispensable clauses of this
document through the normative references. In terms of references with a specified
date, only versions with a specified date are applicable to this document. In terms of
references without a specified date, the latest version (including all the modifications)
is applicable to this document.
GB/T 1884 Crude Petroleum and Liquid Petroleum Products - Laboratory
Determination of Density - Hydrometer Method
GB/T 3730.1 Motor Vehicles and Trailers - Types - Terms and Definitions
GB/T 12534 Motor Vehicles - General Rules of Road Test Method
GB/T 15089 Classification of Power-driven Vehicles and Trailers
GB 17691-2018 Limits and Measurement Methods for Emissions from Diesel Fueled
Heavy-duty Vehicles (China VI)
through the unit conversion factor k2 of Formula (4) in accordance with the relevant
stipulations of Appendix CE.5 of GB 18352.6-2016.
In accordance with the recommendation of the automobile manufacturer and
confirmation by the inspection institution, tr may be replaced by the value
recommended by the automobile manufacturer. Under this circumstance, tr shall be
indicated in the test report.
5 Test Cycle
5.1 In accordance with China heavy-duty commercial vehicle test cycle (CHTC)
specified in Appendix A of GB/T 38146.2-2019, measure the fuel consumption of the
vehicle. Specifically speaking, city buses shall adopt CHTC-B driving conditions;
passenger vehicles (excluding city buses) shall adopt CHTC-C driving conditions;
trucks (excluding dump trucks) shall adopt CHTC-LT (GVW  5,500 kg) or CHTC-HT
(GVW > 5,500 kg) driving conditions; dump trucks shall adopt CHTC-D driving
conditions; semi-trailer tractors shall adopt CHTC-TT driving conditions.
5.2 If the maximum speed of the vehicle is less than the maximum vehicle speed of
CHTC, when the target speed is greater than the maximum vehicle speed, in
accordance with the stipulations of Appendix CA.5 in GB 18352.6-2016, correct the
test cycle.
6 Test Preparation
6.1 Test conditions
6.1.1 The recommended ambient temperature is (23  5) C. In accordance with the
recommendation of the automobile manufacturer and confirmation by the inspection
institution, the range of the ambient temperature may be loosened to 5 C ~ 35 C.
During the test, and at the beginning and the end of the test, the temperature must not
exceed this range, and the actual ambient temperature shall be indicated in the test
report.
6.1.2 The test site shall be equipped with ventilation and cooling devices for power
storage batteries, flywheel shields, safety devices against high voltage and other
necessary safety protection facilities. During the test, a fixed-speed fan may be used
to guide the cooling air to the vehicle, so as to ensure that the operating temperature
of the engine satisfies the manufacturer’s requirements. The fan can only work when
the vehicle is running, and shall be turned off when the vehicle is stopped.
6.2 Pre-collection of Vehicle Data
6.2.1 Before the test, in accordance with the content of Appendix B, vehicle parameters
shall be recorded in detail.
6.2.2 Any content that is different from the basic procedure, for example, the test
vehicle is running in a different working mode than the hybrid electric vehicles, shall be
completely recorded for the subsequent tests to reproduce the test process.
6.3 Vehicle Conditions
6.3.1 Run-in
Before the test, in accordance with the automobile manufacturer’s stipulations, the
vehicle shall be subject to run-in, or the run-in shall not exceed 10,000 km.
6.3.2 Vehicle state
Before the test, the vehicle state shall be checked:
---The performance of the test vehicle shall comply with the automobile
manufacturer’s stipulations and be able to normally drive.
---In accordance with the automobile manufacturer’s stipulations, the engine,
motor and vehicle controls shall be adjusted.
---If the cooling fan of the vehicle is temperature-controllable, it shall be kept in
normal working condition; the air conditioning system of the passenger
compartment shall be turned off.
6.3.3 Load of test vehicle
6.3.3.1 For city buses, the test shall be carried out under the condition of 65% of the
maximum design loading mass. The setting of the road load shall...
Ver todos los detalles