PayPal, credit cards. Download editable-PDF and invoice in 1 second!
GB/T 18572-2001 English PDF (GBT18572-2001)
GB/T 18572-2001 English PDF (GBT18572-2001)
Precio habitual
$85.00 USD
Precio habitual
Precio de oferta
$85.00 USD
Precio unitario
/
por
Los gastos de envío se calculan en la pantalla de pago.
No se pudo cargar la disponibilidad de retiro
Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click GB/T 18572-2001
Historical versions: GB/T 18572-2001
Preview True-PDF (Reload/Scroll if blank)
GB/T 18572-2001: Small craft -- Static thrust measurement for outboard motors
GB/T 18572-2001
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 47.080
U 37
idt ISO 13342:1995
Small Craft - Static Thrust
Measurement for Outboard Motors
ISSUED ON: DECEMBER 13, 2001
IMPLEMENTED ON: AUGUST 01, 2002
Issued by: General Administration of Quality Supervision, Inspection and
Quarantine
Table of Contents
Foreword ... 3
ISO Foreword ... 4
1 Scope ... 5
2 Normative References ... 5
3 Definitions ... 5
4 Outboard Motor ... 5
5 Test Conditions and Procedure ... 6
6 Presentation of Data ... 6
Foreword
This Standard equivalently adopted ISO 13342:1995 Small Craft - Static Thrust
Measurement for Outboard Motors.
This Standard was proposed by China State Shipbuilding Corporation.
This Standard shall be under the jurisdiction of 708 Institute of China State Shipbuilding
Corporation.
Drafting organization of this Standard: 708 Institute of China State Shipbuilding
Corporation.
Chief drafting staffs of this Standard: Li Zhensheng, Lin Dehui, and Wang Zhongzheng.
Small Craft - Static Thrust
Measurement for Outboard Motors
1 Scope
This Standard specifies the method for measuring and declaring the forward and
reverse thrust of outboard motors in a stationary situation to determine if start-in-gear
protection, as specified in ISO 11547, is required.
2 Normative References
The following standards contain provisions which, through reference in this Standard,
constitute provisions of this Standard. At the time of publication, the editions indicated
are valid. All standards are subject to revision. The parties who are using this Standard
shall explore the possibility of using the latest version of the following standards.
ISO 11547:1994 Small Craft – Start-in-Gear Protection
3 Definitions
For the purposes of this Standard, the following definitions apply.
3.1 Thrust
Horizontal force, in newtons, which the outboard motor is capable of producing.
3.2 Declared value of maximum thrust
Average of the thrust measurement that can be maintained for not less than 10 s within
± 10 % of fluctuation at a particular throttle setting.
4 Outboard Motor
4.1 When testing production outboard motors for formal declaration, the test unit shall
be representative of the manufacturer's production units.
4.2 The test outboard motor shall be run-in, operated and adjusted in accordance with
Get QUOTATION in 1-minute: Click GB/T 18572-2001
Historical versions: GB/T 18572-2001
Preview True-PDF (Reload/Scroll if blank)
GB/T 18572-2001: Small craft -- Static thrust measurement for outboard motors
GB/T 18572-2001
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 47.080
U 37
idt ISO 13342:1995
Small Craft - Static Thrust
Measurement for Outboard Motors
ISSUED ON: DECEMBER 13, 2001
IMPLEMENTED ON: AUGUST 01, 2002
Issued by: General Administration of Quality Supervision, Inspection and
Quarantine
Table of Contents
Foreword ... 3
ISO Foreword ... 4
1 Scope ... 5
2 Normative References ... 5
3 Definitions ... 5
4 Outboard Motor ... 5
5 Test Conditions and Procedure ... 6
6 Presentation of Data ... 6
Foreword
This Standard equivalently adopted ISO 13342:1995 Small Craft - Static Thrust
Measurement for Outboard Motors.
This Standard was proposed by China State Shipbuilding Corporation.
This Standard shall be under the jurisdiction of 708 Institute of China State Shipbuilding
Corporation.
Drafting organization of this Standard: 708 Institute of China State Shipbuilding
Corporation.
Chief drafting staffs of this Standard: Li Zhensheng, Lin Dehui, and Wang Zhongzheng.
Small Craft - Static Thrust
Measurement for Outboard Motors
1 Scope
This Standard specifies the method for measuring and declaring the forward and
reverse thrust of outboard motors in a stationary situation to determine if start-in-gear
protection, as specified in ISO 11547, is required.
2 Normative References
The following standards contain provisions which, through reference in this Standard,
constitute provisions of this Standard. At the time of publication, the editions indicated
are valid. All standards are subject to revision. The parties who are using this Standard
shall explore the possibility of using the latest version of the following standards.
ISO 11547:1994 Small Craft – Start-in-Gear Protection
3 Definitions
For the purposes of this Standard, the following definitions apply.
3.1 Thrust
Horizontal force, in newtons, which the outboard motor is capable of producing.
3.2 Declared value of maximum thrust
Average of the thrust measurement that can be maintained for not less than 10 s within
± 10 % of fluctuation at a particular throttle setting.
4 Outboard Motor
4.1 When testing production outboard motors for formal declaration, the test unit shall
be representative of the manufacturer's production units.
4.2 The test outboard motor shall be run-in, operated and adjusted in accordance with
Share



