Ir directamente a la información del producto
1 de 7

PayPal, credit cards. Download editable-PDF and invoice in 1 second!

GB/T 10068-2020 English PDF (GBT10068-2020)

GB/T 10068-2020 English PDF (GBT10068-2020)

Precio habitual $205.00 USD
Precio habitual Precio de oferta $205.00 USD
Oferta Agotado
Los gastos de envío se calculan en la pantalla de pago.
Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click GB/T 10068-2020
Historical versions: GB/T 10068-2020
Preview True-PDF (Reload/Scroll if blank)

GB/T 10068-2020: Mechanical vibration of certain machines with shaft heights 56 mm and higher -- Measurement, evaluation and limits of vibration severity
GB/T 10068-2020
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 29.160.01
K 20
GB/T 10068-2020 / IEC 60034-14:2018
Replacing GB/T 10068-2008
Mechanical Vibration of Certain Machines with Shaft
Heights 56mm and Higher – Measurement, Evaluation
and Limits of Vibration Severity
(IEC 60034-14:2018, Rotating Electrical Machines – Part 14: Mechanical
Vibration of Certain Machines with Shaft Heights 56mm and Higher –
Measurement, Evaluation and Limits of Vibration Severity, IDT)
ISSUED ON: MARCH 31, 2020
IMPLEMENTED ON: OCTOBER 01, 2020
Issued by: State Administration for Market Regulation;
Standardization Administration of PRC.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative References ... 5
3 Terms and Definitions ... 6
4 Measurement Quantities ... 6
5 Measurement Equipment ... 7
6 Machine Mounting ... 7
7 Conditions of Measurement ... 11
8 Limits of Bearing Housing Vibration ... 14
9 Limits of Relative Shaft Vibration ... 17
Bibliography ... 18
Foreword
This Standard was drafted as per the rules specified in GB/T 1.1-2009.
This Standard replaced GB/T 10068-2008 Mechanical Vibration of Certain Machines
with Shaft Heights 56 mm and Higher-Measurement Evaluation and Limits of Vibration
Severity. Compared with GB/T 10068-2008, this Standard has the major technical
changes as follows besides the editorial modifications:
--- Delete the measurement of vibration acceleration; the vibration intensity of the
motor only needs to measure the vibration displacement and vibration speed
(see 4.2 of 2008 Edition);
--- Modify the definition of "free suspension" (see 6.2 of this Edition; 6.2 of 2008
Edition);
--- Change the maximum vibration speed measured on the foot of the rigid
installation not exceeding 25% of the measured vibration speed of the adjacent
bearing into 30% (see 6.3.1.2 of this Edition; 6.3.1 of 2008 Edition);
--- Add the second rigid installation method (see 6.3.1.3 of this Edition);
--- Modify the measurement limits of vibration displacement and vibration speed
(see Table 1 of this Edition; Table 1 of 2008 Edition);
--- Motors with a shaft center height of 132 and below do not consider rigid
installation (see Table 1 of this Edition; Table 1 of 2008 Edition);
--- Add the vibration limit diagram (see Figure 7 of this Edition).
This Standard adopts the translation method to equivalently use IEC 60034-14:2018
Rotating Electrical Machines – Part 14: Mechanical Vibration of Certain Machines with
Shaft Heights 56mm and Higher – Measurement, Evaluation and Limits of Vibration
Severity.
The Chinese documents that have consistent correspondence with the international
documents quoted in the Normative References of this Standard are as follows:
--- GB/T 755-2019 Rotating Electrical Machines - Rating and Performance (IEC
60034-1:2017, IDT);
--- GB/T 997-2008 Rotating Electrical Machines—Classification of Types of
Construction, Mounting Arrangements and Terminal Box Position (IM Code) (IEC
60034-7:2001, IDT);
--- GB/T 9239.32-2017 Mechanical Vibration - Rotor Balancing - Part 32: Shaft and
Mechanical Vibration of Certain Machines with Shaft
Heights 56mm and Higher – Measurement, Evaluation
and Limits of Vibration Severity
1 Scope
This Standard specifies the factory acceptance vibration test procedures and vibration
limits for certain electrical machines under specified conditions, when uncoupled from
any load or prime mover.
This Standard is applicable to DC and three-phase AC machines, with shaft heights 56
mm and higher and a rated output up to 50 MW, at operational speeds from 120 r/min–
~15000 r/min.
This Standard is not applicable to machines mounted in situ (on site), three-phase
commutator motors, single-phase machines, three-phase machines operated on
single-phase systems, vertical waterpower generators, turbine generators greater than
20 MW and machines with magnetic bearings or series-wound machines.
NOTE: For machines measured in situ, refer to current editions of ISO 20816, ISO 10816 and
ISO 7919.
2 Normative References
The following documents are essential to the application of this document. For the
dated documents, only the versions with the dates indicated are applicable to this
document; for the undated documents, only the latest version (including all the
amendments) is applicable to this document.
IEC 60034-1 Rotating Electrical Machines – Part 1: Rating and Performance
IEC 60034-7 Rotating Electrical Machines – Part 7: Classification of Types of
Constructions and Mounting Arrangements (IM Code)
ISO 2954 Mechanical Vibration of Rotating and Reciprocating Machinery –
Requirements for Instruments for Measuring Vibration Severity
ISO 10817-1 Rotating Shaft Vibration Measuring Systems – Part 1: Relative and
NOTE: Large AC induction machines running at very low slip values at no load may require
several minutes to more than 10min for such measurements to be completed at each vibration
measuring position.
4.3 Relative shaft vibration
The criterion adopted for the relative shaft vibration shall be the vibratory displacement
Sp-p in the direction of measurement from ISO 20816-1.
5 Measurement Equipment
The measurement equipment shall be capable of measuring the effective value of
vibration with flat response over a frequency range of 10Hz ~ 1000Hz, in accordance
with the requirements of ISO 2954. However, for machines with speeds approaching
or below 600r/min, the lower limit of the flat response frequency range shall be no
greater than 2Hz.
Measurement equipment for relative shaft vibration shall meet the requirements in ISO
10817-1.
Multi-directional vibration sensors shall not be used.
NOTE: Multi-directional sensors do not provide proper vibration measurement in all directions
when mounted in only one location.
6 Machine Mounting
6.1 General
The vibration of an electrical machine is closely linked with the mounting of the
machine. To permit evaluation as far as balance and vibration of rotating electrical
machines are concerned, it is necessary to measure the vibration on the machine
alone, under properly determined test conditions, to enable reproducible tests to be
carried out and to provide comparable measurements.
6.2 Free suspension
This condition is achieved by suspending the machine on a spring or by mounting on
an elastic support (springs, rubber pads, etc.).
The highest natural oscillation frequency (fno) of the free suspension system and
machine, shall be less than 1/3 of the frequency (f1) corresponding to the speed of the
machine under test, as defined in 7.3. Based on the mass of the machine being tested,
the relationship between elastic displacement and rated speed of the suspension
maximum velocity, which is measured at the adjacent bearing housing in the same
measurement direction. The ratio of foot to bearing vibration velocities is valid for the
electrical line frequency component or twice electrical line frequency component (if the
latter is required to be measured).
NOTE 1: The rigidity of a foundation is a relative quantity. It is compared with the rigidity of the
machine bearing system. The ratio of bearing housing vibration to foundation vibration is a
characteristic quantity for the evaluation of foundation flexibility.
NOTE 2: If the machine is to be supported in the field by a structure other than a massive
foundation, it may be necessary to perform a system dynamic analys...
Ver todos los detalles