1
/
von
11
PayPal, credit cards. Download editable-PDF and invoice in 1 second!
HJ/T 373-2007 English PDF (HJT373-2007)
HJ/T 373-2007 English PDF (HJT373-2007)
Normaler Preis
$145.00 USD
Normaler Preis
Verkaufspreis
$145.00 USD
Grundpreis
/
pro
Versand wird beim Checkout berechnet
Verfügbarkeit für Abholungen konnte nicht geladen werden
Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click HJ/T 373-2007
Historical versions: HJ/T 373-2007
Preview True-PDF (Reload/Scroll if blank)
HJ/T 373-2007: Technical specifications of quality assurance and quality control for monitoring of stationary pollution source(on trial)
HJ/T 373-2007
HJ
INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
Technical specifications of quality assurance
and qualify control for monitoring of stationary
pollution source (on trial)
ISSUED ON. NOVEMBER 12, 2007
IMPLEMENTED ON. JANUARY 1, 2008
Issued by. State Environmental Protection Administration
Announcement of State Environmental Protection
Administration
2007 No. 72
In order to implement Environmental Protection Law of the People’s Republic of China, to
protect environment, ensure human health, specify the supervision and management of
environmental pollution source and improve the accuracy and reliability of monitoring data,
hereby approve and issue two standards, including The technical requirement and test
procedure for Water Quality Automatic Sampler as national environmental protection
industry standard.
The standard name and standard number are as follows.
I. “The Technical Requirement and Test Procedure for Water Quality Automatic
Sampler” (HJ/T372-2007)
II. Technical specifications of quality assurance and qualify control for monitoring of
stationary pollution source (on trial) (HJ/T 373-2007)
The above standards shall be a directive standards, be implemented since January 1,
2008, and be published by the China Environmental Science Press, and the content of the
standards is available at the website of State Environmental Protection Administration
It is hereby to announce.
November 12, 2007
Table of Contents
1 Scope of application ... 5
2 Normative references ... 5
3 Terms and definitions ... 6
4 The technical requirements of quality assurance and quality control for
waste water monitoring ... 6
4.1 Monitoring personnel ... 6
4.2 Monitoring instruments and equipment ... 7
4.3 Verification of working condition ... 8
4.4 Sample collection ... 9
4.5 The basic conditions of analytical laboratory ... 10
4.6 Quality control of laboratory analysis ... 10
4.7 Standard samples and chemical reagents ... 17
4.8 Measurement of the amount ... 17
4.9 Monitoring report ... 17
4.10 Waste water online monitoring system contrastive monitoring quality
assurance and quality control technology requirements ... 18
5 The technical requirements of quality assurance and quality control for
exhaust gas monitoring ... 18
5.1 Tester ... 18
5.2 Monitoring instruments and equipment ... 18
5.3 Working condition verification ... 20
5.4 Sample collection ... 25
5.5 Quality control of laboratory analysis ... 27
5.6 Standard samples and chemical reagents ... 27
5.7 Monitoring report ... 27
5.8 Flue gas online monitoring system contrastive monitoring quality
assurance and quality control technology requirements ... 27
Annex A (Informative) Records of quality assurance and quality control for
monitoring of stationary pollution source ... 29
Annex B (Informative) Verification methods of boiler operating load ... 35
Foreword
In order to implement Environmental Protection Law of the People’s Republic of China,
Water Pollution Prevention and Control Law of the People’s Republic of China and
Atmospheric Pollution Prevention Law of the People’s Republic of China, standardize the
monitoring of pollution source, and ensure the accuracy and reliability of monitoring data
and information, hereby formulate this Standard.
This Standard specifies technical requirements for quality assurance and quality control of
sampling and testing in the process of manually monitoring and comparison monitoring of
waste water discharge and exhaust emission of stationary pollution source.
This Standard is a directive standard.
This Standard is proposed by the Department of Science, Technology and Standards of
State Environmental Protection Administration.
Drafting organizations of this Standard are. China National Environmental Monitoring
Center, and Shenyang Municipal Environmental Monitoring Center.
This Standard was approved by State Environmental Protection Administration on
November 12, 2007.
This Standard was implemented on January 1, 2008.
State Environmental Protection Administration shall be responsible for interpreting this
Standard.
Technical specifications of quality assurance
and qualify control for monitoring of stationary
pollution source (on trial)
1 Scope of application
This Standard specifies technical requirements for quality assurance and quality control of
sampling and testing in the process of manually monitoring and comparison monitoring of
waste water discharge and exhaust emission of stationary pollution source.
This Standard applies to the environmental monitoring of waste water discharge and
exhaust emission of stationary pollution sources.
2 Normative references
The articles contained in the following documents have become part of this Standard
when they are quoted herein. For the undated documents so quoted, all the modifications
or revisions made thereafter shall be applicable to this Standard.
GB 8978-1996 Integrated wastewater discharge standard
GB 12998-91 Water quality-Guidance on sampling techniques
GB 16297-1996 Comprehensive emission standard of air pollutants
GB/T 16157-1996 The determination of particulates and sampling methods of
gaseous pollutants emitted from exhaust gas of stationary source
HJ/T 75-2007 Specifications for continuous emissions monitoring of flue gas emitted
from stationary sources (on trial)
HJ/T 76-2007 Specification and test procedure for continuous emission monitoring
systems of flue gas emitted from stationary sources (on trial)
HJ/T 91-2002 Technical specifications requirements for monitoring of surface water
and waste water
HJ/T 92-2002 Technical requirements for monitoring of total amount of pollutants in
waste water
HJ/T 355-2007 Technical specifications for the operation and assessment of
Wastewater on-line monitoring system (on trial)
HJ/T 356-2007 Technical specifications for validity of wastewater on-line monitoring
data (on trial)
Check-up System of Employment with Certificates for Environmental Monitoring Staff
(Huanfa [2006] No.114)
3 Terms and definitions
For the purpose of this Standard, the following terms and definitions shall apply.
3.1 Quality assurance
The total quality management during the process of environment monitoring includes all
activities and measures to ensure the accuracy and reliability of environmental monitoring
data.
3.2 Quality control
It refers to the operational techniques and activities adopted to meet the quality
requirements of environmental monitoring.
3.3 Comparison monitoring
It refers that in order to verify the accuracy of results of water and gas online automatic
monitor, manual monitoring method and online automatic monitor method are
simultaneously adopted; manual monitoring results are the basis for verifying online
automatic monitoring data. Of which the manual monitoring methods shall use national
standard methods or other currently effective methods.
3.4 Field-laboratory quality control
It refers to the process of synchronous sampling and analysis of quality control samples
and practical samples according to fixed routines. And its quality control results can be
used to determine whether the error of the monitoring results derives from field sampling
or laboratory analysis.
4 The technical requirements of quality assurance and quality control for waste
water monitoring
4.1 Monitoring personnel
When water is deeper than 1...
Get QUOTATION in 1-minute: Click HJ/T 373-2007
Historical versions: HJ/T 373-2007
Preview True-PDF (Reload/Scroll if blank)
HJ/T 373-2007: Technical specifications of quality assurance and quality control for monitoring of stationary pollution source(on trial)
HJ/T 373-2007
HJ
INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
Technical specifications of quality assurance
and qualify control for monitoring of stationary
pollution source (on trial)
ISSUED ON. NOVEMBER 12, 2007
IMPLEMENTED ON. JANUARY 1, 2008
Issued by. State Environmental Protection Administration
Announcement of State Environmental Protection
Administration
2007 No. 72
In order to implement Environmental Protection Law of the People’s Republic of China, to
protect environment, ensure human health, specify the supervision and management of
environmental pollution source and improve the accuracy and reliability of monitoring data,
hereby approve and issue two standards, including The technical requirement and test
procedure for Water Quality Automatic Sampler as national environmental protection
industry standard.
The standard name and standard number are as follows.
I. “The Technical Requirement and Test Procedure for Water Quality Automatic
Sampler” (HJ/T372-2007)
II. Technical specifications of quality assurance and qualify control for monitoring of
stationary pollution source (on trial) (HJ/T 373-2007)
The above standards shall be a directive standards, be implemented since January 1,
2008, and be published by the China Environmental Science Press, and the content of the
standards is available at the website of State Environmental Protection Administration
It is hereby to announce.
November 12, 2007
Table of Contents
1 Scope of application ... 5
2 Normative references ... 5
3 Terms and definitions ... 6
4 The technical requirements of quality assurance and quality control for
waste water monitoring ... 6
4.1 Monitoring personnel ... 6
4.2 Monitoring instruments and equipment ... 7
4.3 Verification of working condition ... 8
4.4 Sample collection ... 9
4.5 The basic conditions of analytical laboratory ... 10
4.6 Quality control of laboratory analysis ... 10
4.7 Standard samples and chemical reagents ... 17
4.8 Measurement of the amount ... 17
4.9 Monitoring report ... 17
4.10 Waste water online monitoring system contrastive monitoring quality
assurance and quality control technology requirements ... 18
5 The technical requirements of quality assurance and quality control for
exhaust gas monitoring ... 18
5.1 Tester ... 18
5.2 Monitoring instruments and equipment ... 18
5.3 Working condition verification ... 20
5.4 Sample collection ... 25
5.5 Quality control of laboratory analysis ... 27
5.6 Standard samples and chemical reagents ... 27
5.7 Monitoring report ... 27
5.8 Flue gas online monitoring system contrastive monitoring quality
assurance and quality control technology requirements ... 27
Annex A (Informative) Records of quality assurance and quality control for
monitoring of stationary pollution source ... 29
Annex B (Informative) Verification methods of boiler operating load ... 35
Foreword
In order to implement Environmental Protection Law of the People’s Republic of China,
Water Pollution Prevention and Control Law of the People’s Republic of China and
Atmospheric Pollution Prevention Law of the People’s Republic of China, standardize the
monitoring of pollution source, and ensure the accuracy and reliability of monitoring data
and information, hereby formulate this Standard.
This Standard specifies technical requirements for quality assurance and quality control of
sampling and testing in the process of manually monitoring and comparison monitoring of
waste water discharge and exhaust emission of stationary pollution source.
This Standard is a directive standard.
This Standard is proposed by the Department of Science, Technology and Standards of
State Environmental Protection Administration.
Drafting organizations of this Standard are. China National Environmental Monitoring
Center, and Shenyang Municipal Environmental Monitoring Center.
This Standard was approved by State Environmental Protection Administration on
November 12, 2007.
This Standard was implemented on January 1, 2008.
State Environmental Protection Administration shall be responsible for interpreting this
Standard.
Technical specifications of quality assurance
and qualify control for monitoring of stationary
pollution source (on trial)
1 Scope of application
This Standard specifies technical requirements for quality assurance and quality control of
sampling and testing in the process of manually monitoring and comparison monitoring of
waste water discharge and exhaust emission of stationary pollution source.
This Standard applies to the environmental monitoring of waste water discharge and
exhaust emission of stationary pollution sources.
2 Normative references
The articles contained in the following documents have become part of this Standard
when they are quoted herein. For the undated documents so quoted, all the modifications
or revisions made thereafter shall be applicable to this Standard.
GB 8978-1996 Integrated wastewater discharge standard
GB 12998-91 Water quality-Guidance on sampling techniques
GB 16297-1996 Comprehensive emission standard of air pollutants
GB/T 16157-1996 The determination of particulates and sampling methods of
gaseous pollutants emitted from exhaust gas of stationary source
HJ/T 75-2007 Specifications for continuous emissions monitoring of flue gas emitted
from stationary sources (on trial)
HJ/T 76-2007 Specification and test procedure for continuous emission monitoring
systems of flue gas emitted from stationary sources (on trial)
HJ/T 91-2002 Technical specifications requirements for monitoring of surface water
and waste water
HJ/T 92-2002 Technical requirements for monitoring of total amount of pollutants in
waste water
HJ/T 355-2007 Technical specifications for the operation and assessment of
Wastewater on-line monitoring system (on trial)
HJ/T 356-2007 Technical specifications for validity of wastewater on-line monitoring
data (on trial)
Check-up System of Employment with Certificates for Environmental Monitoring Staff
(Huanfa [2006] No.114)
3 Terms and definitions
For the purpose of this Standard, the following terms and definitions shall apply.
3.1 Quality assurance
The total quality management during the process of environment monitoring includes all
activities and measures to ensure the accuracy and reliability of environmental monitoring
data.
3.2 Quality control
It refers to the operational techniques and activities adopted to meet the quality
requirements of environmental monitoring.
3.3 Comparison monitoring
It refers that in order to verify the accuracy of results of water and gas online automatic
monitor, manual monitoring method and online automatic monitor method are
simultaneously adopted; manual monitoring results are the basis for verifying online
automatic monitoring data. Of which the manual monitoring methods shall use national
standard methods or other currently effective methods.
3.4 Field-laboratory quality control
It refers to the process of synchronous sampling and analysis of quality control samples
and practical samples according to fixed routines. And its quality control results can be
used to determine whether the error of the monitoring results derives from field sampling
or laboratory analysis.
4 The technical requirements of quality assurance and quality control for waste
water monitoring
4.1 Monitoring personnel
When water is deeper than 1...
Share










