Zu Produktinformationen springen
1 von 5

PayPal, credit cards. Download editable-PDF and invoice in 1 second!

GB/T 905-1994 English PDF (GBT905-1994)

GB/T 905-1994 English PDF (GBT905-1994)

Normaler Preis $70.00 USD
Normaler Preis Verkaufspreis $70.00 USD
Sale Ausverkauft
Versand wird beim Checkout berechnet
Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click GB/T 905-1994
Historical versions: GB/T 905-1994
Preview True-PDF (Reload/Scroll if blank)

GB/T 905-1994: Dimension, shape, weight and tolerance for cold-drawn round, square and hexagonal steels
GB/T 905-1994
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
GB/T 905-94
Replacing GB/T 905-82
GB/T 906-82
GB/T 907-82
Dimension, Shape, Weight and Tolerance for Cold-
Drawn Round, Square and Hexagonal Steels
APPROVED ON. DECEMBER 22, 1994
IMPLEMENTED ON. OCTOBER 01, 1995
Approved by. State Bureau of Technical Supervision
Table of Contents
1 Subject Contents and Applicable Scope ... 3
2 Sectional Diagram and Marking Symbols of Steel ... 3
3 Dimension, Weight and Tolerance ... 4
4 Shape ... 8
5 Marking Example ... 9
Additional Information... 10
Dimension, Shape, Weight and Tolerance for Cold-
Drawn Round, Square and Hexagonal Steels
The dimensional tolerance in this Standard are based on the values in the international
standard ISO 286.1-1998 ISO System of Limits and Fits – Part 1. Bases of Tolerances,
Deviation and Fits; and are consistent with the provisions of GB 1800 Tolerances and
Fits.
1 Subject Contents and Applicable Scope
This Standard specifies the dimension, shape, weight and tolerance of cold-drawn
round, square and hexagonal steels.
This Standard is applicable to the cold-drawn round, square and hexagonal steels with
dimension of 3~80mm.
2 Sectional Diagram and Marking Symbols of Steel
2.1 The sectional diagram and marking symbols of round steel is as shown in Figure
1.
Figure 1
2.2 The sectional diagram and marking symbols of square steel is as shown in Figure
2.
3.3.2 According to the negotiation between the supplier and the purchaser, the steel
with the tolerance beyond that of the specified in Table 2 can be supplied.
3.3.3 The dimensional tolerance level of steel can refer to Table 3.
Table 3
3.4 Length and Tolerance of steel
3.4.1 Normal length
3.4.1.1 The normal length of the steel is 2000~6000mm. The steel with length no less
than 1500mm is allowed to be delivered; its weight shall not exceed 10% total weigh
of such batch; however, the high-alloy steel with length no less than 1000mm is allowed
to be delivered; its weight shall not exceed 10% total weight of such batch.
3.4.1.2 Through the negotiation between the supplier and the purchaser, the steel with
length greater than 6000mm can be supplied.
3.4.2 Specified and multiple length
3.4.2.1 The steel delivered by the specified and multiple length, and indicated in the
contract, its length tolerance shall be no greater than +50 0 mm
3.4.2.2 Through the negotiation between the supplier and the purchaser, for the steel
delivered by the specified and multiple length, the non-specified steel with weight no
greater than 10% of the total weight of such batch is allowed to be delivered.
4 Shape
4.1 The steel is delivered in straight bars.
4.2 Through the negotiation between the supplier and the purchaser, steel can be
delivered in discs; the disc diameter and weight shall be agreed upon by the two parties.
4.3 According to the demand of the purchaser, the round steel with out-of-roundness
no greater than 50% diameter tolerance can be supplied.
4.4 Steel shall be free of significant torsion; while the square steel shall be free of
significant out-of-squareness.
4.5 When there are special requirements for the radius of top corner and diagonal lines
on the square steel and hexagonal steel, it shall be negotiated by the supplier and the
Round steel Square steel Hexagonal steel Sectional shape
Applicable level
purchaser.
4.6 The end of the steel shall not have a bend and the shearing deformation that may
affect the use.
4.7 Curvature
4.7.1 Steel with dimension greater than or equal to 7mm for straight bar delivery, its
curvature shall conform to the provisions of Table 4.
Table 4
NOTE. The round steel for auto-cutting shall be indicated in the contract.
4.7.2 Through the negotiation between the supplier and the purchaser, for the
hexagonal steel for auto-cutting and for straight bar delivery, when its dimension is
7~25mm, then the curvature per meter shall be no greater than 2mm; when its
dimension is greater than 25mm, then the curvature per meter shall be no greater than
1mm.
4.7.3 For the steel with dimension less than 7mm for straight bar delivery, its curvature
per meter shall be no greater than 4mm.
5 Marking Example
The markings of cold-drawn steels made of 40Cr steel, with dimension tolerance of
Level-11, the diameter, side length and opposite side distance of 20mm shall be as
follows.
Cold-drawn round steel.
Cold-drawn square steel.
Cold-drawn hexagonal steel.
Level
Level
Level
Level
Round steel for auto-cutting
Curvature No greater than No greater than Total curvature
Dimension
The product of the total length and the
allowable curvature per meter

Vollständige Details anzeigen