1
/
von
6
PayPal, credit cards. Download editable-PDF and invoice in 1 second!
GB/T 6461-2002 English PDF (GBT6461-2002)
GB/T 6461-2002 English PDF (GBT6461-2002)
Normaler Preis
$85.00 USD
Normaler Preis
Verkaufspreis
$85.00 USD
Grundpreis
/
pro
Versand wird beim Checkout berechnet
Verfügbarkeit für Abholungen konnte nicht geladen werden
Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click GB/T 6461-2002
Historical versions: GB/T 6461-2002
Preview True-PDF (Reload/Scroll if blank)
GB/T 6461-2002: Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates -- Rating of test specimens and manufactured articles subjected to corrosion tests
GB/T 6461-2002
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ISC 25.220.20
A 29
Replacing GB/T 6461-1986
GB/T 12335-1990
Methods for Corrosion Testing of Metallic and Other
Inorganic Coatings on Metallic Substrates - Rating of
Test Specimens and Manufactured Articles Subjected
to Corrosion Tests
(ISO 10289.1999, IDT)
ISSUED ON. SEPTEMBER 11, 2002
IMPLEMENTED ON. APRIL 1, 2003
Issued by. General Administration of Quality Supervision, Inspection
and Quarantine of the People's Republic of China
Table of Contents
Foreword ... 3
Introduction ... 5
1 Scope ... 6
2 Terms and Definitions ... 6
3 Principle ... 7
4 Types of Defect ... 8
5 Method of Inspection ... 9
6 Assignment of Ratings ... 10
7 Test Report ... 12
Appendix A (informative) Dot Charts and Colour Photographs for
Coatings Cathodic to the Base Metal ) ... 14
Appendix B (Informative) Dot Charts for Coatings Anodic to the Base
Metal ... 20
Bibliography ... 26
Foreword
This Standard equivalently adopts ISO 10289.1999 “Methods for Corrosion Testing of
Metallic and Other Inorganic Coatings on Metallic Substrates - Rating of Test
Specimens and Manufactured Articles Subjected to Corrosion Tests” (English edition).
This Standard equivalently translates the international standard; it is based on the
English edition of the international standard. For ease of use, the following editorial
modifications are made.
- Use “This Standard” to replace “this International standard”;
- Delete the “Foreword” in the international standard.
This Standard replaces GB/T 6461-1986 “Metallic Coatings - Coatings Cathodic to the
Substrate - Rating of Electro-plated Test Specimens Subjected to Corrosion Tests”
and GB/T 12335-1990 “Metallic Coatings - Coatings Anodic to the Substrate - Rating
of Test Specimens Subjected to Corrosion”.
Compared with GB/T 6461-1986 and GB/T 12335-1990, the main changes in this
Standard are as follows.
- For “Dot Charts for Coatings Anodic to the Base Metal” (Appendix B), it
better-matches with the shapes of defects on specimens and articles after
corrosion test in a further degree; Appendix A in the former GB/T 12335 is
deleted.
- Chapter 6 in this Standard makes significant modifications to those in Chapters 5,
6 and 7 of the former GB/T 12335; Chapters 4, 5, 6, and Appendix A in the former
GB/T 6461, so as to make the expression to be clearer and more complete.
- “Within 6mm of the edge of a specimen” in Section 3.4 of the former GB/T 6461
and Section 4.5 in the former GB/T 12335 is changed to be “within 5mm of the
edge of a specimen or tape/wax”.
Appendixes A and B in this Standard are informative.
This Standard was proposed by the China Machinery Industry Federation
This Standard shall be under the jurisdiction of the National Technical Committee on
Metallic and Non-metallic Coatings of Standardization Administration of China.
Drafting organization of this Standard. Wuhan Material Protection Research Institute.
Chief drafting staffs of this Standard. Zhang Yan, Li Zhi, Wang Yaping, Sun Zhiyong,
Wu Laixing, and Zhang Sanping.
The previous editions replaced by this Standard are as follows.
GB/T 6461-1986, and GB/T 12335-1990.
Methods for Corrosion Testing of Metallic and Other
Inorganic Coatings on Metallic Substrates - Rating of Test
Specimens and Manufactured Articles Subjected to
Corrosion Tests
1 Scope
This Standard gives a method of evaluating the condition of decorative and protective
metallic and inorganic coated panels or articles which have been exposed to corrosive
environments for test or for other purposes.
It is applicable to test panels or articles exposed to natural atmospheres, in mobile or
static conditions, or subjected to accelerated tests.
Notes 1. Examples of such tests are given in the Bibliography.
This Standard recognizes that the protection rating can be assessed objectively in accordance
with Chapter 6. However, the assessment of appearance depends on many subjective factors
(see Section 6.2).
2 The edges of test panels or articles may be protected, e.g. by tape or wax (paraffin), if this
is an agreed part of the test, it shall be recorded in the test report. This is essential if the
specimens are cut from larger pieces and have exposed uncoated edges.
2 Terms and Definitions
For the purpose of this Standard, the following terms and definitions apply.
2.1
Protection rating
Rp
Rating number (see Table 1) assigned to the ability of the coating to protect the base
metal from corrosion.
2.2
Protection defect
Defect used to assess the protection rating, including crater corrosion, pin-hole
Bibliography
GB/T 6464-1997 Metals and Its Coatings - Atmospheric Corrosion Testing - General
Requirements for Field Tests (eqv ISO 8565.1992)
GB 6465-1986 Metallic and Other Non-organic Coatings - Corrodokote Corrosion
Test (CORR Test) (eqv ISO 4541.1978)
GB 9789-1988 Metallic and Other Non-organic Coatings - Sulfur Dioxide Test with
General Condensation of Moisture (eqv ISO 6988.1985)
GB/T 10125-1997 Corrosion Tests in Artificial Atmospheres - Salt Spray Tests (eqv
ISO 9227.1990)
GB/T 11377-1989 Metallic and Other Non-Organic Coatings - General Rules for
Corrosion Tests Applicable for Storage Conditions (eqv ISO 4543.1981)
GB/T 14293-1998 Corrosion Tests in Artificial Atmospheres - General Requirement
(eqv ISO 7384.1986)
JB/T 7702-1995 Metallic and Non-organic Coatings on Metallic Substrates - Saline
Droplets Corrosion Test (SD Test) (eqv ISO 4536.1985)
ISO 4538-1978 Metallic Coatings - Thioacetamide Corrosion Test (TAA Test)
Get QUOTATION in 1-minute: Click GB/T 6461-2002
Historical versions: GB/T 6461-2002
Preview True-PDF (Reload/Scroll if blank)
GB/T 6461-2002: Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates -- Rating of test specimens and manufactured articles subjected to corrosion tests
GB/T 6461-2002
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ISC 25.220.20
A 29
Replacing GB/T 6461-1986
GB/T 12335-1990
Methods for Corrosion Testing of Metallic and Other
Inorganic Coatings on Metallic Substrates - Rating of
Test Specimens and Manufactured Articles Subjected
to Corrosion Tests
(ISO 10289.1999, IDT)
ISSUED ON. SEPTEMBER 11, 2002
IMPLEMENTED ON. APRIL 1, 2003
Issued by. General Administration of Quality Supervision, Inspection
and Quarantine of the People's Republic of China
Table of Contents
Foreword ... 3
Introduction ... 5
1 Scope ... 6
2 Terms and Definitions ... 6
3 Principle ... 7
4 Types of Defect ... 8
5 Method of Inspection ... 9
6 Assignment of Ratings ... 10
7 Test Report ... 12
Appendix A (informative) Dot Charts and Colour Photographs for
Coatings Cathodic to the Base Metal ) ... 14
Appendix B (Informative) Dot Charts for Coatings Anodic to the Base
Metal ... 20
Bibliography ... 26
Foreword
This Standard equivalently adopts ISO 10289.1999 “Methods for Corrosion Testing of
Metallic and Other Inorganic Coatings on Metallic Substrates - Rating of Test
Specimens and Manufactured Articles Subjected to Corrosion Tests” (English edition).
This Standard equivalently translates the international standard; it is based on the
English edition of the international standard. For ease of use, the following editorial
modifications are made.
- Use “This Standard” to replace “this International standard”;
- Delete the “Foreword” in the international standard.
This Standard replaces GB/T 6461-1986 “Metallic Coatings - Coatings Cathodic to the
Substrate - Rating of Electro-plated Test Specimens Subjected to Corrosion Tests”
and GB/T 12335-1990 “Metallic Coatings - Coatings Anodic to the Substrate - Rating
of Test Specimens Subjected to Corrosion”.
Compared with GB/T 6461-1986 and GB/T 12335-1990, the main changes in this
Standard are as follows.
- For “Dot Charts for Coatings Anodic to the Base Metal” (Appendix B), it
better-matches with the shapes of defects on specimens and articles after
corrosion test in a further degree; Appendix A in the former GB/T 12335 is
deleted.
- Chapter 6 in this Standard makes significant modifications to those in Chapters 5,
6 and 7 of the former GB/T 12335; Chapters 4, 5, 6, and Appendix A in the former
GB/T 6461, so as to make the expression to be clearer and more complete.
- “Within 6mm of the edge of a specimen” in Section 3.4 of the former GB/T 6461
and Section 4.5 in the former GB/T 12335 is changed to be “within 5mm of the
edge of a specimen or tape/wax”.
Appendixes A and B in this Standard are informative.
This Standard was proposed by the China Machinery Industry Federation
This Standard shall be under the jurisdiction of the National Technical Committee on
Metallic and Non-metallic Coatings of Standardization Administration of China.
Drafting organization of this Standard. Wuhan Material Protection Research Institute.
Chief drafting staffs of this Standard. Zhang Yan, Li Zhi, Wang Yaping, Sun Zhiyong,
Wu Laixing, and Zhang Sanping.
The previous editions replaced by this Standard are as follows.
GB/T 6461-1986, and GB/T 12335-1990.
Methods for Corrosion Testing of Metallic and Other
Inorganic Coatings on Metallic Substrates - Rating of Test
Specimens and Manufactured Articles Subjected to
Corrosion Tests
1 Scope
This Standard gives a method of evaluating the condition of decorative and protective
metallic and inorganic coated panels or articles which have been exposed to corrosive
environments for test or for other purposes.
It is applicable to test panels or articles exposed to natural atmospheres, in mobile or
static conditions, or subjected to accelerated tests.
Notes 1. Examples of such tests are given in the Bibliography.
This Standard recognizes that the protection rating can be assessed objectively in accordance
with Chapter 6. However, the assessment of appearance depends on many subjective factors
(see Section 6.2).
2 The edges of test panels or articles may be protected, e.g. by tape or wax (paraffin), if this
is an agreed part of the test, it shall be recorded in the test report. This is essential if the
specimens are cut from larger pieces and have exposed uncoated edges.
2 Terms and Definitions
For the purpose of this Standard, the following terms and definitions apply.
2.1
Protection rating
Rp
Rating number (see Table 1) assigned to the ability of the coating to protect the base
metal from corrosion.
2.2
Protection defect
Defect used to assess the protection rating, including crater corrosion, pin-hole
Bibliography
GB/T 6464-1997 Metals and Its Coatings - Atmospheric Corrosion Testing - General
Requirements for Field Tests (eqv ISO 8565.1992)
GB 6465-1986 Metallic and Other Non-organic Coatings - Corrodokote Corrosion
Test (CORR Test) (eqv ISO 4541.1978)
GB 9789-1988 Metallic and Other Non-organic Coatings - Sulfur Dioxide Test with
General Condensation of Moisture (eqv ISO 6988.1985)
GB/T 10125-1997 Corrosion Tests in Artificial Atmospheres - Salt Spray Tests (eqv
ISO 9227.1990)
GB/T 11377-1989 Metallic and Other Non-Organic Coatings - General Rules for
Corrosion Tests Applicable for Storage Conditions (eqv ISO 4543.1981)
GB/T 14293-1998 Corrosion Tests in Artificial Atmospheres - General Requirement
(eqv ISO 7384.1986)
JB/T 7702-1995 Metallic and Non-organic Coatings on Metallic Substrates - Saline
Droplets Corrosion Test (SD Test) (eqv ISO 4536.1985)
ISO 4538-1978 Metallic Coatings - Thioacetamide Corrosion Test (TAA Test)
Share





