Zu Produktinformationen springen
1 von 8

PayPal, credit cards. Download editable-PDF and invoice in 1 second!

GB/T 18849-2023 English PDF (GBT18849-2023)

GB/T 18849-2023 English PDF (GBT18849-2023)

Normaler Preis $260.00 USD
Normaler Preis Verkaufspreis $260.00 USD
Sale Ausverkauft
Versand wird beim Checkout berechnet
Delivery: 3 seconds. Download true-PDF + Invoice.
Get QUOTATION in 1-minute: Click GB/T 18849-2023
Historical versions: GB/T 18849-2023
Preview True-PDF (Reload/Scroll if blank)

GB/T 18849-2023: Powered industrial trucks -- Brake performance and component strength
GB/T 18849-2023
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 53.060
CCS J 83
GB/T 18849-2023 / ISO 6292:2020
Replacing GB/T 18849-2011
Powered industrial trucks - Brake performance and
component strength
(ISO 6292:2020, Powered industrial trucks and tractors - Brake performance
and component strength, IDT)
ISSUED ON: NOVEMBER 27, 2023
IMPLEMENTED ON: JUNE 01, 2024
Issued by: State Administration for Market Regulation;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative references ... 5
3 Terms and definitions ... 5
4 Requirements ... 8
5 Test conditions ... 11
6 Performance tests ... 13
References ... 17
Powered industrial trucks - Brake performance and
component strength
1 Scope
This document specifies the performance, test methods, operating controls, operating
force and component strength for brake systems fitted to the following industrial trucks,
as defined in ISO 5053-1:
-- powered industrial trucks of various lifting capacity/load capacity;
-- towing and pushing tractors with a drawbar pull not greater than 66 750 N
(hereinafter referred to as “industrial tractors”);
-- burden carriers;
-- industrial trucks handling freight containers.
This document does not apply to power outages and any other auxiliary power outages,
nor does it apply to braking in emergency situations (such as turning on the emergency
switch or shutting down the control system).
This document applies only to newly manufactured trucks.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
braking force
Force in a direction opposite to the truck’s movement speed or movement trend, which
is generated between the wheel and the ground contact surface through the action of the
braking system (3.3).
[Source: GB/T 5620-2020, 9.11.3]
3.2
Foreseeable minimum mass of an unladen truck in the intended use of the truck,
considering various combinations of optional attachments.
3.13
drawbar drag
Steady-state braking force (3.1) that can be applied to the ground by the mechanical
braking system (3.3) at a given speed.
4 Requirements
4.1 Required braking systems
The truck shall have the following braking systems:
-- a service braking system;
-- a parking braking system.
4.2 Operating means
The service braking system and the parking braking system shall be operated by
separate systems. The two sets of braking systems can use the same braking components,
such as brake shoes, brake drums and related transmission parts. This requirement does
not apply to independent braking systems fitted to trucks with stand-up and walk-up
controls as defined in ISO 3691-1.
4.3 Service braking system
The service braking system shall comply with the following requirements:
-- stopping distance test (see 6.3.1) and heat fade test (see 6.5.2);
-- drawbar drag test (see 6.3.2) and heat fade test (see 6.5.3); or
-- optional test procedure, such as calculation (see 6.3.3), and heat fade test
simulation (see 6.5).
4.4 Parking braking system
The parking braking system shall meet the requirements of 6.2.
4.5 Brake operating forces
4.5.1 Under the conditions of 6.2 and 6.3.1 or 6.3.2, the operating force of the brake
shall not be greater than the values specified in 4.5.2 ~ 4.5.6 and Table 1.
Note: Other types of brake operation may exist.
4.5.2 For brakes that achieve braking by moving the brake pedal downward (depressing
the pedal), the required service braking performance and parking braking performance
shall be achieved using an operating force of no more than 450 N.
4.5.3 For brakes that achieve braking by moving the brake pedal upward (releasing the
pedal), when the brake pedal is completely released, the required service braking
performance and parking braking performance shall be achieved. When traveling, the
operating force required to fully depress the brake pedal to release the brake shall not
be greater than 200 N.
4.5.4 For brakes that achieve braking by operating the handle, applying an operating
force of no more than 300 N to the gripping point of the handle shall be able to achieve
the required parking braking performance.
4.5.5 For brakes that achieve braking by gripping the handle, applying an operating
force of no more than 150 N to the gripping point of the handle shall be able to achieve
the required service braking performance.
4.5.6 For brakes that achieve braking by enabling the steering lever from the offset
position to the vertical position (such as on a pedestrian-controlled truck), applying an
operating force of no more than 150 N to the middle position of the steering lever hand-
gripping position to make the spring of the steering lever in the maximum compression
stroke position shall achieve the required service braking performance.
4.6 Brake component strength
4.6.1 The brake component strength shall not be lower than the values specified in 4.6.2
~ 4.6.6 and Table 1.
4.6.2 For trucks that achieve service or parking brake by moving the brake pedal
downward (depressing the brake pedal), the braking system shall be able to withstand
an operating force of at least 1 200 N without any damage, cracks or deformation that
affects the braking performance or function.
4.6.3 For trucks that achieve service or parking braking by moving the brake pedal
upward (releasing the brake pedal), the braking system (including the upper limiting
device) shall be able to withstand 200% of the maximum setting force of the spring of
the band-type brake without any damage, cracks or deformation that affects the braking
performance or function.
When the brake pedal is fully depressed, the brake pedal and its associated lower
limiting device shall be able to withstand the operating force of 1 800 N acting on the
middle part of the brake pedal transmission surface without any damage, cracks or
deformation that affects the braking performance or function.
times/min, the pneumatic service braking system shall be able to provide a pressure of
70% of the maximum system pressure measured at the brake.
4.7.1.2 Braking system with hydraulic accumulator
The capacity of the hydraulic accumulator charging system shall be designed such that
when the service brake is fully applied at a braking frequency of once every 5 seconds,
the pressure in the accumulator is not less than the pressure required for meeting the
braking performance of 6.3.1 or 6.3.2. For internal combustion trucks (IC), the test shall
be conducted when the truck is stationary and idling. The test time shall be at least 2
minutes.
4.7.2 Energy storage failure alarm device
The service braking system utilizing stored energy for braking shall be equipped with
an alarm device that will be triggered before the stored energy fails to meet the braking
performance requirements specified in 6.3. The device shall be clearly visible or audible
to the operator and shall provide a continuous alarm signal when triggered. The use of
instruments solely indicating pressure or vacuum to meet the above requirements is not
permitted.
The triggering pressure of the alarm device shall be set such that the truck can still meet
the braking requirements of 6.3.1 or 6.3.2 under this pressure. This requirement does
not apply...
Vollständige Details anzeigen